I would be happy to! To add a hitch to a 2024 Chevrolet Trailblazer, I recommend the Draw-Tite item # DT55GR. This hitch is custom fit and bolts to your Trailblazer with included hardware.
I recommended the Draw-Tite Hitch item # DT55GR because of the way it installs. The main crosstube mounts behind your rear bumper cover leaving only the 2" receiver exposed. This not only looks better but helps with ground clearance.
If you are planning on towing you will also need a wiring harness... view full answer...
There are going to be a lot of options for a Tonneau Cover for a 2023 Toyota Tacoma with a 6' bed. Ultimately it will come down to what style of cover you want, and how much you want to spend.
In recent years, the retractable covers have been a very popular option. They are easy to install, and have a very smooth opening/closing. One of our most popular retractable covers is the Pace Edwards Switchblade # 311-SWTA13A37. Aluminum panels give the cover a seamless look, which will help to... view full answer...
Hey Richard, thanks for reaching out and giving your experience!
The Timbren brand is really popular because they've built a name for themselves and while they do work, a common theme we've discovered with them is that they are too stiff, especially when the tow vehicle is unloaded. We often joke that Timbrens will either fix your back problems or give you back problems.
For a better system I recommend using air bags instead. These give you complete control over how much support the suspension... view full answer...
As I see you were looking at the Advent Air Low Profile RV Air Conditioner # ADV79FR this will use the Heat Strip # ACMHD. We do have the Advent Package # ACM135CH which will contain the AC, heat strip, air distribution box and compressor. If you are looking for a heat strip for a different AC please let me know what make and model you have so I can verify the correct heat strip for you. view full answer...
Hello Barbara, we certainly should have the correct replacement clearance lights for your 2012 Thor Hurricane 32A motorhome. That said, I do not have a way to know exactly what light you will need based on a year make and model of RV. Based on the pictures I can see online, the clearance lights look similar to the Optronics Trailer Clearance or Side Marker Light # MC32AB and # MCL32RB. These are 4" long x 2" tall x 1" deep LED clearance lights.
If this is not exactly what you have, feel... view full answer...
For a 300 amp fuse you'll want to use the Installation Kit for Go Power Inverters - 300 Amp Fuse item # 342GPDCKIT4 if you need the cable or just the Go Power Inverter Fuse with Block - Class T - 300 Amp item # 34244227REVA if you do not. view full answer...
I agree it can be a bit overwhelming looking through all of the roof racks for your 2024 Subaru Forester, but don't worry I'll help you out.
The first thing you'd want to get figured out is the style of bars you're looking for. Currently there are square, round, and aero bars. Once you decide on a bar style you'll then want to choose a length. For your vehicle, we have bars that measure 30" to 65" long.
Finally, the last thing to consider would be branding. Some people are brand loyalists... view full answer...
Hello Don. So, there are technically no speed limitations when using the 22x60 Flint Hill Goods Cargo Carrier # FHG49ZR. Obviously, you will want to obey all posted speed limits and any other DOT regulations. The carrier is made to withstand bumps and ruts in the road within reason. If your roads are anything like ours here in Missouri, you are likely to run into a few potholes that are simply unreasonable, and in those scenarios, simply do your best to slow down and use caution. Basically,... view full answer...
Hey Demtrios, I recommend checking out the Rhino-Rack Vortex Aero Crossbars # RRVA118B-2 with the Rhino-Rack SX Series Legs for Vortex Aero Crossbars # RRSX100.
These crossbars will easily and quickly install onto your existing raised rails, and will provide you with an excellent surface to transport your ladder using the Load Stops for Rhino-Rack Vortex Crossbars # S602.
I also recommend getting the Cam-Lock Ladder Strap with Snap Shackle for Rhino-Rack Vortex Crossbars # SLS5 to easily... view full answer...
We should have a potential solution for you, but to answer your question, no, you cannot safely use the Curt High-Low Adapter # C27KR for this purpose. The Curt adapter is to be used for flat towing only and cannot be used for towing a trailer, regardless of weight.
Are you trying to raise/lower the height of a weight distribution hitch? Generally this is done by using a shank with the appropriate amount of rise or drop such as the Curt Welded Weight Distribution Shank # C17123.
I am... view full answer...
Hello David. Based on what I can see online the Barricade Alloy Bumper has welded D-rings. Provided this bumper is tow rated, I suggest using the Roadmaster D-ring adapters # RM-035 for 3/4" thick D-Rings or # RM-035-1 for 1" and use a Roadmaster Falcon All Terrain, Non-Binding Tow Bar, # RM-522. I do suggest that you contact the manufacturer of this bumper and verify that it is rated for flat towing.
If the bumper is not tow rated, the Roadmaster Direct-Connect Base Plate Kit # RM77VR... view full answer...
Hey Roger, looking at your setup I have a solution but I don't think you'll have enough room between the camper and the Durango to successfully mount a bike rack so what your best option will be is a roof rack for the 2014 Dodge Durango RT like with the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK299 so that you can use a roof bike rack like the Rhino Rack # RRRBC050. view full answer...
For extra support with your Cirrus 620 Truck Camper I recommend the Timbren Suspension Enhancement System # T53MR. These have 8,600 lbs of load-leveling capacity and are specifically designed for constant loads like your truck bed camper or salt spreaders. They are going to add the extra support you're looking for while helping to reduce sag and increasing your overall stability. Keep in mind, these do not increase the actual capacity of your 2024 Silverado.
In addition to your traditional... view full answer...
Hey Charles,
While we do have a roof rack system for your Wrangler I do want to note that there are no American made options as most of the manufacturers for roof racks are either based in Africa or Europe/Asia. If you're looking to capitalize on space and want to hold a lot of items then Rhino-Rack or Front Runner are going to be the best option with their platform racks.
-The Rhino-Rack Pioneer Platform Rack with Gutter Mount Backbone Mounting System - 57" x 59" # RR86XP
-Front... view full answer...
Hello David, I can definitely point you in the right direction. The Lippert 5,200 lb axles will use the standard 12" x 2" brake assemblies. For that I recommend the etrailer Rust-Resistant Electric Trailer Brakes # AKEBRK-7-D. This comes with a pair of Dacromet coasted electric brake assemblies.
As far as the hubs, it is not quite so cut and dry. The 5,200 lb axles generally use a # 25580 inner bearing and a # 15123 outer bearing. Given that your axle is almost 20 years old, it may not... view full answer...
For your Loadrite Boat Trailer with ST205/75/R14 tires, I recommend checking out the Kenda Karrier ST205/75R14 Radial Tire # AM34659.
This is a tire and wheel combination that has a 5 on 4 1/2" bolt pattern, ST205/75R14 tires, and has a ply rating of 8 with a 2,200-lb maximum load at 75 PSI.
For an upgraded lug nut Americana Trailer Wheel Lug Nut # AM26NR.
These lug nuts will fit on a 1/2-20 wheel bolt, measures 1 1/2" long, and is made of stainless steel to help resist rust and corrosion. view full answer...
Happy Monday, Tom!
The trailer hitches and wiring that fit your 2021 Toyota RAV4 will be the same for the Hybrid models as well as the standard models so we don't have to go with any special parts thankfully. With that being the case, here are my recommendations for your 2021 Hybrid:
- etrailer Trailer Hitch Receiver # e23ZR
- Curt T-Connector # C56434
- Mounting Brackets # 18144 and # C57202
I like the etrailer hitch because the matte black finish looks better and is more durable... view full answer...
Hey Aj, I will be honest with you we really do not offer an axle that is going to be close to your specifications. We have an axle # T20BTR-EZ-7258 that has the 58" spring center, but it is only 72" long hub face so it is a good bit short. From there our axles will get a lot longer like 86.5" hub face.
We do offer axle-less systems like the Timbren # A35RS545, which can be used for virtually any application, but I understand if this is not what you are looking for.
Your best bet will... view full answer...
We do have some potential options for you, but I am afraid we do not have a teardrop fender that measures exactly 62" long 9" wide.
The closest thing we have will be the # HP94VR fender which is a 65" long 9" wide teardrop fender. I am not sure exactly what kind of trailer you are working with, but if you have room to go a bit longer on the fender this will be the best option. They are also available in stainless # HP34VR.
From there the next closest size is a 60" long 9" wide # HP22FR.... view full answer...
Go To Results