Availability Of A 2,700 lb Axle With 58" Spring Center And 75.5" HF
Question:
Looking for a 2700# trailer axle with 58” spring center, 75.5” over all with 1 1/6” spindles
asked by: Aj B
Expert Reply:
Hey Aj, I will be honest with you we really do not offer an axle that is going to be close to your specifications. We have an axle # T20BTR-EZ-7258 that has the 58" spring center, but it is only 72" long hub face so it is a good bit short. From there our axles will get a lot longer like 86.5" hub face.
We do offer axle-less systems like the Timbren # A35RS545, which can be used for virtually any application, but I understand if this is not what you are looking for.
Your best bet will be to try contacting an axle manufacturer like Dexter as they should offer a few more options than we do.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Dexter P-15 SLR Axle SN D4484069 Weight Capacity and Replacement Axle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Stability Control for Heavy Duty Vehicles
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Axle With 58" Spring Center And 1-1/16" Spindles
- Q&A: Troubleshooting Hayes Syncronizer Trailer Brake Controller
- Q&A: Can Utility Trailer Hubs Be Changed From A 5 On 4.5 Bolt Pattern To A 6 On 5.5 Bolt Pattern
- Article: Where to Position the Trailer Axle?
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Article: How to Tell the Weight Rating of a Trailer Axle