We will only have the Chrome # LHSI60C replacement version of the SUSUC-60-BLK. We do have the Americana Center Cap # AM90081 in black. This is slightly smaller but may still fit your Grand Design Solitude 345GK. These caps fit a hole size of 1-7/8" versus the 1-15/16" the Chrome # LHSI60C center cap is designed to fit. view full answer...
Yes we do!
For your MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-07500K, you'll want to use the:
-Replacement 12-Volt Variable Speed Fan Motor for MaxxAir MaxxFan RV Roof Vents # MA10-20968.
This will replace the 12-volt DC variable-speed fan motor on your MaxxAir MaxxFan RV roof vent models: MA00-04000K, MA00A04301K, MA00A04401K, MA00-04500K, MA00-05100K, MA00-05301K, MA00-06200K, MA00-06401K, MA00-07000K, or MA00-07500K. view full answer...
I am not able to find specs on a Sylvania Model SR-11092 "G". However, I can locate information for a SR-11092"B" with dimensions of 12-1/4" tall x 20" wide x 13" deep. For this, the Greystone Microwave part # 324-000105 that is 12" tall x 19" wide x 14-5/8" deep will be a good fit providing you have an additional 1-5/8" of open area behind the currently installed microwave, allowing for the deeper fit of this unit. view full answer...
Thanks for the axle information, Mike!
Here are the correct parts according to my contact at Curt:
- Bearing # 02475 and Race # 02420
- Bearing # 25580 and Race # 25520
- Grease Seals # RG06-070 view full answer...
The correct Replacement Hardware Kit for Westin HDX Grille Guards for your 2015 GMC Sierra 1500 is Item # 57-369PK. This fits the Westin HDX Grille Guard with Punch Plate - Polished Stainless Steel item # 57-3690 and the Westin HDX Grille Guard with Punch Plate - Black Powder Coated Steel item # 57-3695. view full answer...
I spoke with my contact at Trailair and the replacement air spring / bag that you will need for your Ultra-Fab Air Ride 5th Wheel King Pin, # LC158778, is part 156622. view full answer...
Your 5th wheel is equipped with a Venture CJ13517 pin box, and unfortunately there isn't a Goose Box that's compatible.
Since your truck has a gooseneck hitch, we do have some possible options that would work for you. If your existing gooseneck is a B&W Turnover Ball, the B&W Companion, part # BWRVK3500-5W is what I'd recommend using. A more universal option would be the Demco Recon, part # DM8550045 would be an excellent choice. The Recon would mount in your existing gooseneck hitch by... view full answer...
It sounds like you are looking for the footplate for your etrailer Round A-Frame Jack # TJA-5000-B. For this you will use the etrailer footplate # JF-99, which will fit the 2-inch diameter tubing on your jack. If you are interested in a caster wheel, we have the part # BD500245 which is compatible with your jack as well. Just note that the caster does have a 1,200-pound capacity so this would reduce the capacity of your jack to this number if used.
I have attached a couple short video... view full answer...
Sure thing!
For your Westin HDX Grille Guard with Punch Plate # W92AQ, you can use the:
-Replacement Installation Mounting Hardware and Brackets for Westin HDX Grille Guards # W63DF.
This kit includes the installation hardware and mounting brackets required to install your Westin HDX grille guard # W63DF. view full answer...
The easiest way to identify your MORryde pin box is to locate the pin box model number, which should be written on a label on the pin box. For example, if your MORryde pin box has a part number like MORryde SPB72-1621LD, the 1621 in the number would indicate it was designed to replace a Lippert 1621 pin box, for which the correct air ride replacement would be Trailair Flex Air # LC328492 (18,000 lbs) or # LC369535 (21,000 lbs).
If you cannot find this information or it isn't legible, you'll... view full answer...
I reached out to Reese and they do not offer that pin separately for your Reese M5 5th Wheel Trailer Hitch # RP26FR. You would have to get a new Head # RP30892 to get their exact pin setup otherwise you can use the 1/4" Safety Pin with 8" Chain # 337P11C. This chain will allow you to better secure the pin to the 5th wheel hitch making it less likely to lose in the future. view full answer...
The Titan Chain Snow Tire Chains w/ Cams for Dual Tires # TC4821CAM have multiple cams on either side. If you're just missing one cam then you may try installing them to see if the cam is needed - if it is then you can replace it using the Replacement Cam Tightener # TCCAM2.
If the cams are missing from one whole side of the tire chains then you'll need the Replacement Side Chain with Cams and Fastener # TC218SCCAM instead. You can use the Titan Chain Repair Pliers # TCRP2 to accomplish... view full answer...
Thank you for the pictures, using the provided pictures I was able to tell that you have the Furrion Vision S wireless system. You have 3 monitor options for that system and I have listed them below.
For a 4.3" monitor you can use the Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System # FR77FR.
For a 5" monitor you can use the Replacement 5" Monitor for Furrion Vision S Wireless RV Camera System # FR97FR.
For a 7" monitor you can use the Replacement 7" Monitor for... view full answer...
The Replacement Head Unit for Curt A16 and Q16 5th Wheel Trailer Hitches # C16520 will fit the Curt A16 5th Wheel Trailer Hitch Dual Jaw 16,000 lbs # C16120. view full answer...
I believe the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015 is what you are looking for. This is a replacement for several different manufacturers.
Be sure to compare this with the one that you have on your 2006 Keystone Raptor as if your setup was changed at some point in the last 15 years you may have something different. If you find something different on your Raptor please send me a picture and I will help you to find the correct part. view full answer...
The proper replacement legs for your Curt Q20 5th wheel hitch for the model year 2020 and newer GM tow/prep package pucks are part # CU53FR, assuming you have a stationary (non-sliding) hitch. These will bolt into place, replacing your existing legs that fit the previous puck spacing.
If your current hitch is a sliding hitch, you'd need the # C88KR adapter.
I've linked to product description videos for both parts I recommended. view full answer...
The Replacement Tail Panel Assembly for Extang Solid Fold 2.0 Hard Tonneau Cover # EX83475-62 is designed to fit the Extang Solid Fold 2.0 Hard Tonneau Cover which is a fit for the 2015-2020 Ford F-150 & F-150 Raptor Short Bed trucks, and is not going to be a fit for your 2015 GMC Sierra 3500.
Instead, what you're going to need is the Replacement Tail Panel Assembly for Extang Solid Fold 2.0 Hard Tonneau Cover # EX83445-62.
I did go ahead and verify with Extang that this is the correct... view full answer...
I spoke with Curt about replacement cases for their # C60692, but unfortunately they do not carry them as replacements. That being said, I do have an alternate option for you to take a look at.
The etrailer.com Accessory Bag # e98900 has a 10 liter capacity and is also water resistant. Though not a direct replacement, this would be a good option to carry the # C60692 components. view full answer...
I reached out to Bauer Products and they said you can swap out the lock core on your current Bauer Products Compression Latch for 2" Thick Ramp Doors - Matte Black # BA67FR with the new one so your locks match. They also said that this will need to be performed by a dealer, so you will need to find one that is able to switch out the lock core. view full answer...