Foot Plate for 5,000 Pound Round A-Frame Trailer Jack
Question:
I purchased a frame jack as a replacement for my trailer. The jack is rated at 5,000 lbs and is attached to the trailer with a frame mount. The model # TJA-5000-B. My question is what can I use for the bottom plate.
asked by: Joseph G
Expert Reply:
It sounds like you are looking for the footplate for your etrailer Round A-Frame Jack # TJA-5000-B. For this you will use the etrailer footplate # JF-99, which will fit the 2-inch diameter tubing on your jack. If you are interested in a caster wheel, we have the part # BD500245 which is compatible with your jack as well. Just note that the caster does have a 1,200-pound capacity so this would reduce the capacity of your jack to this number if used.
I have attached a couple short video demonstrations on these products that you can also check out.
Products Referenced in This Question
Removable 6" Caster for 2-1/4" Trailer Jacks - Steel Caster - 1,200 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Wheel
- 6 Inch Wheel
- Wheel w Caster Assembly
- etrailer
more information >
Footplate for 2,000-lb and 5,000-lb Round, A-Frame Jacks
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Foot
- etrailer
more information >
Product Page this Question was Asked From
Round A-Frame Trailer Jack - Topwind - 14-1/8" Travel - 5,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jacks
- Steel
- 4001 - 5000 lbs
- Topwind Jack
- 14 Inch Lift
- Bolt-On
- Weld-On
- No Wheel or Foot
- etrailer
more information >
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: 2 inch Outer Diameter A-Frame Trailer Jack Recommendation
- Article: How to Choose the Right Trailer Hitch Class
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Wiring 3-Wire Breakaway Switch as Replacement for 2-Wire Switch
- Q&A: What are the Wire Colors and Functions of the Nissan Factory Brake Controller Harness
- Q&A: Replacement Dexter Hub for 8-91A Hub
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Q&A: Compatibility of LED Hitch Cover FHG72VR with Wiring Harness 118384 on 2012 Chevy Colorado
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: Trailer Wiring Diagrams
- Article: Stability Control for Heavy Duty Vehicles
- Article: What To Look For When Buying Ratchet Straps