Hi Ken,
The slots are slightly different between the standard Yakima Tracks (42" # Y01126, 54" # Y01127, 60" # Y01135) and HD Tracks (54" # Y64MR, 60" # Y74MR, 72" # Y84MR) so the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT would not be compatible with the HD Tracks. If you haven't gotten the Tracks yet then you'll want to go with the standards options. If you already have Yakima HD tracks then you'll need the following components:
Landing Pad 26 # Y75ZR (x2)
SkyLine... view full answer...
I have a measurement that will help you to determine if you are going to be able to use the Yakima EXO Swing Away 2-Bike Rack # Y92VR behind your Sprinter van with the spare tire mounted on the rear door. From the center of the hitch pin hole on the rack to the front arm that lifts to secure your bike is 11". If your spare tire sticks out further than this from the hitch pin center hole you will need the Extension # Y69VR which will add 7-1/4" to the length. This is the only extension approved... view full answer...
That sounds right to me Travis, but while you have everything pulled out it wouldn't hurt to re-measure and double-check. The height shouldn't have changed and everything should essentially go as you've described, but If it were me I'd take a quick measurement to double-check. view full answer...
Hey Mark, thanks for the question and we do have an option for you, though not the exact LT245/75R16 M+S Radial XTX. Reason for that is those are light truck tires and not trailer tires (light truck tires will have an "LT" before the tire size and trailer tires have an "ST" before the size).
That said, we have a very close option in size, with a ST235/80R16 trailer tire. These are 30.8" in diameter and 9.25" wide, so they will only add about 1/8" of height at the top of the tire and are... view full answer...
There is an install manual, which is linked below, though it doesn't have the measurements of the Curt Trailer Hitch Receiver # C15845.
That said, the # C15845 is a verified fit for the 2024 Ford F-450 Cab & Chassis, and I added an image showing the dimensions. view full answer...
The 8" Long Trailer Hitch Extender item # e88YR you were looking at would be the best option, for both length and price, to clear the spare tire on your 2020 Jeep Wrangler. This will allow you to install the Swagman XTC2 Bike Rack item # S64670 and not have to worry about rubbing against the tire.
It is important to note that any time you use hitch extender of any kind, it decreases the weight capacity of the hitch by 50%. view full answer...
Hey Brian, the B&W Continuum Weight Distribution Head Assembly # BW48FR only weighs 52 lbs, so you should be able to easily remove it and put it on a moving dolly like the Snap-Loc Pushcart with E-Track Anchor Points # SL1500PTR319-P.
This dolly has a 33" tall handle to make moving the head around easy, has a 1,500 lb capacity, and when you're done using the dolly you can remove the handle for compact storage. view full answer...
The 525 lb max tongue weight and 3,500 lb max gross trailer weight rating is what the # e98848 is capable of. Many aftermarket Class III hitches are able to handle more weight than the vehicle they are designed for. Occasionally the towing capacity of the vehicle exceeds the capacity of the hitch. Whatever the case may be, you are always limited by the lower capacity. In this case, you are limited by the weight capacity listed in your 2024 Honda CR-V owner's manual. view full answer...
We do have a rocker switch that can be wired in a three way config - the Single Rocker Switch # 37212625. This switch is American made, measures 1.2" tall x .5" wide, and has cut out dimensions of 1-1/8" tall x 1/2" wide. view full answer...
Hey Jason, we just received one of these Replacement Brake Levers # T0776600 in stock and I was able to get the measurements you requested. I hope you don't mind if I use the picture you made.
A: 9 9/16"
B: 1"
C: Outside to outside:1 1/16"
Inside to Inside: 13/16"
D: Full length: 8 5/8"
To center of the pivot: 8 1/8" view full answer...
Hey Nick, the Trimax Trailer Wheel Chock and Lock # TMX75FR you're looking at will work with your 175/80r13 trailer tires. This lock has measures 6" wide when closed and 10 1/2" when opened all the way, so with your tires measuring 6.9" wide this'll work fine. view full answer...
Hi Kathi,
Anode rods are sacrificial hunks of metal that are designed to deteriorate so that the metal of the tank won't. A bit more length for the rod would just mean that this new anode rod would last longer. Most RV water heaters require an anode rid with a 3/4" NPT thread size so you'll want to measure the opening to see if the 1/2" # CAM11593 would be a compatible fit. When you open the door there should be a few stickers with some information about the water heater and the model... view full answer...
Hey Bob I got in touch with my contact am MORryde and they sent me a dimensional drawing of the MORryde Safe-T-Rail # MR54BR. The drawing indicates that the portion that attaches to the wall of the camper is 52.2" tall overall. This is including the secondary mount bracket, which ships loose with the assembly. The dimensional drawing you see on our web page (also pictured below) does not show the fully assembled rail, but the rail without the secondary mount bracket attached (see top right... view full answer...
Hi Tom,
The Saris MHS Bike Rack for 1 Bike # SAR23MR weighs approximately 67lbs and has an 80lb bike capacity. The overall length from the hitch pin hole to the furthest point on the rack is approximately 27". If you need any other info just let me know and I'd be happy to help. view full answer...
Looking up the information for your 2017 Forest River Cherokee Grey Wolf 26DBH I see it has a GVWR of 7,725lbs with a 725lb tongue weight which means you likely have tandem 3,500lb axles. You should find this information on the front drivers corner of your camper on the information tag. We currently have 23-1/8" # e59SR and 27" # e97SR leaf springs with the capacity for 3,500lb axles. These lengths are from the bolt hole center to bolt hole center on the leaf springs when the springs are... view full answer...
Welcome back! Since you are not a fan of foam blocks like Item # MPG172. I recommend the Malone Rack Pads for Crossbars item # MPG314. They measure 25" long x 4" wide x 2" tall and wrap around your item # MPG216 crossbars with Velcro. view full answer...
Hey Greg,
Starting with the Big B # 36971026, this model boat fender doesn't come with eyelets and requires you to run the rope through the fender. Next up is the Storm Gard # 369282600 which is the same as the Big B, but has eyelets to tie the rope to. The Super Gard # 369957824 is also the same with the only difference being that the eyelets are a different color that the rest of the models. These all come in different sizes to accommodate different boat lengths so the only difference... view full answer...
Hey Aileen, you will need to install an aftermarket roof rack on your 2015 Honda CR-V to use your older model Thule Hullavator part # TH898. For that the Thule roof rack part numbers # TH29HG would be the way to go to give you a square bar rack like what the carrier was designed for. view full answer...
Scott, I wish I had a way to look up the parts for your 2018 Nitro Boat trailer but unfortunately the parts breakdowns are not available to the public. I image where you are getting caught up is the 31" wheel spacing. This is a measurement you really do not have to concern yourself with. Instead you will want to measure the height and width of the bolt hole centers on your equalizer as well as the length of the shackle straps on center. I see you were looking at the Dexter Heavy-Duty Suspension... view full answer...
Hey Greg,
I've drawn up a diagram of the dimensions for the Brophy Rope D-Ring Tie-Down Anchor # BR59FR and attached it below. If you have any other questions then just let me know. view full answer...
Go To Results