The Lippert Components High-Speed Power Stabilizer Jack # LC298707 referenced in your question includes 1 stabilizer jack that can be used for either a front or rear mount application on your camper.
This electric stabilizer jack will give you up to 30 inches of lift and can automatically adjust to the terrain so uneven ground is not an issue. I have attached a short video demonstration on this product so you can get an even closer look at its features. view full answer...
Buyers Products 2" Pintle Hook Mount # 337PM90 does not come with hardware to mount a pintle hook to it. Some of the pintle hooks come with hardware, such as Curt model # C48210. Or if you just need hardware you can use # C48330. view full answer...
If you have a single axle trailer you would need to order two Trailer Hub and Drum Assembly part # AKHD-550-35-EZ-K as they are sold individually. view full answer...
Yes! The Thule Stacker # TH830 is compatible with the factory crossbars on the 2016 Honda Odyssey. I've attached a picture of all of the parts that come included to allow you to safely carry your kayaks on the roof of your vehicle; I've also included a picture of the instructions that references the contents of the package as well.
You may want to consider adding the Malone Hood Loops # MPG308 for some added security over the included straps. These allow you to slide the bars under the... view full answer...
The grease seal that is included in the # BK1-150 bearing kit has an inner diameter of 1.5" and outer diameter of 1.987". We do not have a double lip grease seal with the exact measurements you specified, but the TruRyde grease seal # 34823 is a double lip seal that has an inner diameter of 1.249" and outer diameter of 1.983"; this is the closest seal to the 1.25" ID and 2.00" OD seal you mentioned. These can also be purchased in a pair with part # RG06-010.
If you check your seal and... view full answer...
The Andersen # AM3620 includes 1 plastic drive on jack that can also be used as a leveler for single axle trailers, as a chock or when turned on its side it can be used as a base for a trailer jack. A rubber grip is included to prevent the chock from slipping.
I've provided a link to a product demonstration video. view full answer...
The Tourney Transom Saver # 315-FXK comes with a 2 year manufacturer's limited warranty that will cover any breakage because of faulty craftsmanship. This particular unit is made from a high quality and high strength aluminum that helps resist corrosion, which would be a primary cause of most malfunctions. I'll also say that from what I was able to find, I haven't found any specific instances of this transom saver malfunctioning for any of our customers. For peace of mind, it might help... view full answer...
The entire GloLight Uni-Lite LED Clearance and Side Marker Light # MCL110AKB will need to be replaced if the light goes out as there are no bulb replacements. Since this is a small LED it should theoretically last as long as you have your trailer so you shouldn't ever have to replace the bulb unless it was damaged, but in that case the housing would be damaged as well and the unit would need to be replaced anyways. The wiring at the back of the housing is a solid connection so you would... view full answer...
Because it's a sealed unit and designed to be surface mounted, the Command # 328-003-6017R Hot-Line LED Trailer Third Brake Light Bar doesn't include or need a gasket. Because it's designed to be submersible, the unit is completely waterproof.
If your concern is water ingress into the vehicle it's mounted on through the hole that the wires pass through, running a generous bead of silicone sealant like # 0160297 around the hole would do a good job of sealing things up.
I've linked you... view full answer...
The Yakima Replacement Q Tower, # Y8880048, is just one Q tower body which is just one piece.
It does not include the Yakima Replacement Q-Cam Cover Assembly, # Y8810071, or the vehicle specific Q clips.
I do have the Yakima Replacement Q Tower with Cam Cover Assembly, # Y8880047. which is the Q tower and the cam cover assembly. You will still need the Q clips for your vehicle.
The Q clips are vehicle specific, so they would have to be ordered for your vehicle. view full answer...
Although it isn't paired together in a kit, you can use the T-Fitting # 103537-MBS with the Quick-Disconnect Propane Hose # 100476-72-MBS for your application. This provides you with the quick-disconnect equivalent of the MB Sturgis Sturgi-Flow T-Fitting w/ Hose for POL Valve # 103608 that you referenced. view full answer...
The spring and bearing act as a detent.
I spoke with Bulldog in hopes they'd have a diagram showing how that assembly went together, but unfortunately the drawing they had doesn't show the spring and the ball bearing you're asking about. The good news is that he was able to describe where those specific pieces go well enough that I can describe it to you.
The jack will have two internal shafts, one cross shaft that goes all the way through the jack from one side to the other. The other... view full answer...
Yes, the Lippert Components 28:1 Venture Actuator Slide-Out Motor # LC136373 does have a clutch that prevents it from over travelling. view full answer...
Curt Trailer Hitch Receiver # 13354 does not come with a wiring harness; reason being that not everyone is using the hitch for towing so we make each component available separately. To add a 4-Way flat connector to your 2009 Acura MDX you can use # 118424. I have linked videos showing example installations of both the hitch and the wiring for you.
I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4... view full answer...
The Timbren Axle-Less Trailer Suspension System # TASR5200S03 does included both a left and a right side. The 4 inch lift spindle does mean that it will raise the trailer 4 inches. If you need the trailer lower there is a version with 4 inch drop spindles, # ASR5200S04. view full answer...
The Bargman LED, Recessed, Double Tail Light # 47-84-527 is for one single unit. You will need a second for the opposite side of your trailer. Each of these single units has two lights within it. Those replacement lights are the # 47-84-420. view full answer...
The same part reference # RHK is used for many different Replacement Hardware Kits for many different brands and models of trailer hitch. The kits can include bolts, nuts, spacers and a bolt leader (fishwire) for installation.
When ordering one of the # RHK kits you are prompted to enter your hitch's brand and its actual part number (from its safety sticker) to allow us to assemble the exact components needed to duplicate the original included hitch hardware.
If you want to know the specific... view full answer...
Yes, the Westin Sure-Grip Running Boards w/ Custom Installation Kit # 27-6120-1945 comes with all mounting brackets needed to install on your 2019 Toyota 4Runner. All you need other than this kit is the basic hand tools for the install which include 13 mm socket and wrench, a ratchet and a torque wrench. view full answer...
The Swagman Hauler Kayak and Canoe Transporter # S65144 includes tie-down straps that secure your kayak or canoe to the dolly, so you won't have to worry about it falling off while you're moving it from your vehicle to the water. view full answer...