Hey Colt,
I did a lot of searching and unfortunately the Curt Adjustable 2-Ball Channel Mount for a 2-1/2" Hitch # C45927 does not come with a pintle hook-only attachment, and there isn't a similar option for a 2-1/2" hitch with a rise/drop similar to the 10-3/8" Drop, 8-7/8" Rise this mount has.
I know it's not what you wanted but just to be thorough, you can use this mount with Pintle Hook # C45922 and Pins & Clips # C45925. view full answer...
Hi Steve,
There is not a trailer end 4-round that comes with the wiring attached, just the plug version, the Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Connector - Metal - Trailer End # PK11402. view full answer...
Good question Chuck, but you won't actually have to remove the etrailer logo on the Pop & Lock Custom Tailgate Lock with Handle # PL6200.
It won't come with the product, we only put that sticker on for our photos to try and prevent people from using the photos without permission. The # PL6200 you receive will not have a sticker on it. view full answer...
Hi Stephen,
Yes, the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs # F2709 would be compatible with your 2022 Chevy Silverado 3500. Titan lists that their tank would not interfere with any any spring suspension systems and from what I can see in their install/tips video the tank is far enough away from where these sit that you shouldn't have any issues. I've attached a short video below where the Shane will walk you through the installation process.
If you'd like to... view full answer...
Yes, the Gen-Y Torsion weight distribtuion shank part # 325-GH-1102 that you reference will work great with your Pro Series weight distribution as it was designed to have same bolt pattern. view full answer...
Yes, you will have to drill holes in your lower fascia to attach the plug mount that is included with the Demco Tabless Base Plate Kit # DM77YV. This is a main reason I prefer to use the Roadmaster Direct-Connect Base Plate # RM97RR as they include mounts on their base plate for the wiring/plug mount. There is also a connection for a breakaway cable that comes with a Braking System # SM99251.
If you already have a Demco tow bar we do have the Adapter # DM9523032 you can use to mount to... view full answer...
Gen-Y currently only shows their 5" Offset # GY43XR only fitting the 2017 and newer Ford Super Duty trucks. I have included a drawing with the dimensions for this below you can check and see if it will fit your 2012 Ford F-350. If not another option would be to use a Rail Adapter # C88KR with an Offset Ball # 16055.
Based on information I could find online I see the 2024 Brinkley Z3100 is going to come with a Lippert Rhino pin box. If this is what you have you will need the Gen-Y Hitch... view full answer...
Yes, the High Pointe Built-In RV Microwave # HP39ZR does have a turntable included. This microwave is a bit smaller than what you have currently, so if you'd prefer one that's closer to what you have the High Pointe Built-In Flat Bed RV Microwave - 900 Watts # HP84ZR is what I'd go for. view full answer...
Hi Nichole,
The Hidden Hitch by Draw-Tite Trailer Hitch Receiver # DT38GR doesn't come with a wire harness included so you would need to pick up the Tekonsha T-One Vehicle Wiring Harness # 118467 for your 2015 Subaru Outback. This wire harness will only take a few minutes to install, just pull up a few pieces of trim in the rear hatch area and plug it right in. I've attached a video below where Randy will walk you through the installation process. view full answer...
Hi Scott,
As long as your motorhome has the 'Spartan Safe Haul' system the Demco Air Force One Flat Tow Brake System for Spartan K2 400 Chassis RVs with Safe Haul # DM54YV would be compatible with the factory air lines on the motorhome. From what I'm reading every Spartan chassis from 2019 and newer should come with the Safe Haul system installed, but it never hurts to verify.
If you haven't picked out the rest of your flat towing components then I have the following recommendations... view full answer...
You will receive one of the E-Track Plastic End Cap item # ET8730. It just rounds off the rough end of the track. It'll keep equipment and anything else from catching on the end of E-tracks like item # e62VR. view full answer...
Hey David, thanks for the picture. I was able to track down a spec sheet for your Dexter axle which I have included below. The 031-029-02 bearing is item # 15123 and the 031-030-02 bearing is item # 25580. For a bearing kit you can use part # BK3-110 which will come with both bearings, races, grease seal, spindle washer and cotter pin. view full answer...
Hey Jeff, cool trailer. It sounds like you are already on the right track here, because the Curt TruTrack Weight Distribution System # C17501 is definitely a good option for your Ember 240TKR travel trailer.
This system is intended for trailers with a tongue weight between 1,000 lbs and 1,500 lbs. Generally, the tongue weight of a travel trailer will be 10%-15% of the total weight. it sounds like your trailer is going to be a bit heavier on the tongue, so I am thinking you may be closer... view full answer...
We do have locks that will work with your Dexter A-60 Brake Actuator # DX56FR. The Coupler Lock # e98888 will allow you to secure the trailer to your vehicle when towing. This lock pin replaces the included push pin which comes with the actuator.
For storage you will want to use the Fastway Universal Trailer Coupler Lock # FA86-0015-316. This can be used with the coupler lock above as well.
I have linked videos for each of these locks near the bottom of the page which shows them being... view full answer...
The Easy Grease Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K is designed to be used with 13"-15" diameter wheels. If using steel wheels they can be torqued between 90-120 ft-lbs while aluminum wheels should be torqued between 90-100 ft-lbs. I have included a helpful chart below that you can use as a reference. view full answer...
I have attached the instructions below for the # FOS43TASF. Since you purchased the Replacement 4.3" Monitor # FR77FR that comes with this camera system it will be the same. view full answer...
The Ark Drop Down Corner RV Stabilizer Jacks # AR34FR are designed to be welded on, so this is the only way we can recommend installing them. With the included mounts there really is not enough room between the stabilizer itself and the mounting plate to add any additional hardware. So, bolting them on is really not possible.
If you need a drop leg that can be bolted on, take a look at the Stallion Stabilizer Jacks # 288-01892-2 which are designed to be bolted on. view full answer...
Hey John,
If you have a 2008 Mini Cooper hardtop S-model or 2008 Mini Clubman hardtop then you'll need the Roadmaster # 521877-1. This will work with Aerodynamic Package, but not with Sport suspension.
If you have a 2008 Mini Cooper hardtop base model then you'll need the Roadmaster # 521878-1. This does not fit models with Aerodynamic Package or Sport suspension.
If you haven't picked out the rest of your flat towing setup then I have the following recommendations for you:
Tow Bar:... view full answer...