If the latch looks like the # 295-000015 I've linked for you, the # 295-000041 you'd looked at would be the correct key.
Without knowing exactly who the manufacturer of the latch is, it would be difficult to say. What I can tell you is that Global Link makes the majority of the door latches you'll come across, so the chances would be very good that the # 295-000041 number 315 key would work for you. If you could provide a photo of the latch, I might be able to positively confirm it for you. view full answer...
There sure is!
To order the replacement mounting hardware for the Curt Front Mount Trailer Hitch Receiver # C31063 you have you will need the Replacement Hardware Kit # RHK.
You will need to select Curt from the drop down menu, and then enter 31063 as the hitch item number. This will include all of the components needed including the fish wire.
I included a video of the # RHK for you to take a look at. view full answer...
Mounting kits for bull bar and grille guard products like the ones for your 2004 Ford Ranger XLT, which are shown on the linked page, are both vehicle-specific and product-specific. There is no one mounting kit that works for multiple products on multiple vehicles. This means that you will want to review the items shown to find the specific one for which you need the installation kit.
The page has click-on filters that allow you to narrow down the products by type (bull bar or grille guard),... view full answer...
We offer replacement brake shoes for 10 x 1-1/2- and 10 x 2-1/4-inch electric drum brakes but no longer for the 1-3/4-inch width you reference. Dexter part # bp04-065 you referenced is a set of replacement brake shoes for electric trailer brakes normally seen on Dexter 2.8K axles. I was not able to find any brake part with the reference number 1530114. It does sound like an update is in order.
If you want to replace your brake assemblies and hubs/drum assemblies you will need to match... view full answer...
As it sounds like you may already know, mounting hardware for grille guards are going to be specific both to the vehicle they mount to and also the particular model grille guard they are used with.
We do have replacement mounting kits available that are designed for your 2004 Ford Ranger, but I cannot confirm if this will work with your existing grille guard even with modifications. For example, the Replacement Hardware Kit # 40-088PK is designed for your Ford Ranger. It is the replacement... view full answer...
We have limited options for replacement snap covers for the 2000 Ford Ranger but I will try to help you. The two options we do have depending on the style of 6 foot bed you have are.
The Replacement Tarp for Extang BlackMax Soft Tonneau Cover item # EX1600 fits a 2000 Ford Ranger Stepside with a 6 foot bed.
The Replacement Tarp for Extang BlackMax Soft Tonneau Cover item # EX1630 fits a 2000 Ford Ranger (excluding Stepside) with a 6 foot bed. view full answer...
If the axles on your trailer were replaced 4 years ago and now it uses 3,500 lb axles then that's the size brakes and hub/drum assembly that we need to look at for replacement parts. If you have disc brakes with the 5 on 4-1/2" bolt pattern then the Kodiak Disc Brake Kit # K2HR35D that you were looking at would be a great replacement. If you have drum brakes with the same bolt pattern then you'll need the kit # AKHD-545-35-G-EZ-K instead.
These use an # L68149 inner bearing, # L44649 outer... view full answer...
For your Truxsport Tonneau on your 2007 Ford Ranger, you will want the Replacement Truxedo Shur-Bond Velcro Brand Fastener # TX1117876. This is a 1 inch wide strip of the hook side of the velcro. To remove the old adhesive I suggest using Goo Gone or something similar that won't damage your paint. view full answer...
The replacement hardware kit for a Westin Sportsman Grille Guard # 40-2055, which fits on 2006-2012 Ford Ranger trucks, is Replacement Mounting kit # 40-205PK . This is the replacement hardware you'll need to mount your Westin grille guard on your 2011 Ford Ranger. view full answer...
We have several RV range hood exterior wall vents but they all need a 10-1/2 x 3-3/4 inch opening like # V2111-03. Since these vents are larger than the opening you have you could still use one of them by either expanding the opening or trimming the collar on the vent.
Vent # V2111-13, # V2111-55 and # V2018-01 all have a 1-3/4 inch deep collar
Vent # V2111-03 has a 5/8 inch deep collar
Vent # V2009-01 has a 1/2 inch deep collar view full answer...
You will actually need # RHK if the hitch on your 2004 Ford Ranger is an aftermarket hitch. Enter the hitch number and manufacturer on the RHK page to get the right hardware.
Hardware kit # 01685 was designed for specific aftermarket trailer hitches for 1980 to 1997 Ford F-Series. view full answer...
The first thing you need to flat tow your 2022 Ford Ranger 4WD is a base plate kit with the part # BLU77XR which is a confirmed fit and very easy to use and install.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the Blue Ox Avail # BX7420 which comes with safety cables. The coiled design helps keep the cables off of the ground.
For lighting... view full answer...
The replacement hardware you were looking at, part # 40-088PK, is for the Westin Sportsman grille guard that fits your 2006 Ford Ranger. The complete grille guard is part # 40-0885.
If that's the grille guard you have then the hardware you looked at is correct. If you have a different grille guard let me know what model you have and I'll see if we have the hardware for your truck. view full answer...
We have TruXedo brand tonneau covers to fit your 2003 Ford Ranger with 6-foot flare-side or step-side bed, the TruXport # TX247101 and Lo Pro QT TX547101.
The part you referenced, Replacement Cover # TX2471-CVR, is the correct part if you have the TruXport cover.
If you have the Lo Pro QT then instead use # TX5471-CVR. view full answer...
All available grille guards and bull bars confirmed to fit your 2010 Ford Ranger are displayed on the linked page. These include products from Westin and Aries.
If you need only the mounting hardware kit for an existing guard please tell me which one you have by reviewing the link.
The hardware kit you referenced, part # AABRKT-2059, fits the grille guard # AA2059. Please note this guard is not a fit for your vehicle; it fits only the Toyota FJ Cruiser for model years 2007 through 2014.... view full answer...
It looks like you have the original version of the Prodigy RF, part 902501, which was updated to the newer version of the Prodigy RF TK94FR (also known as part 902502). The replacement controller # TK27FR you're looking at is for the newer model which uses a Bluetooth connection whereas the older version did not.
If you can find a controller for the older model then definitely go for it. Otherwise you'll need to swap out your controller to the newer version, part # TK94FR, or a different... view full answer...
We do have the TruXedo Velcro strips that fit in the rails. We have an 80 inch long by 1-5/16 inch wide set of 2, # TX1115174. For longer beds we have # TX1115173 which is 90 inches long.
We no longer have the Replacement Velcro Adhesive Kit for older style covers that have adhesive backing strips. view full answer...
While we do not carry the Tonno Pro brand of tonneau covers, I do still have a potential solution for you.
Check out the:
-Replacement TruXedo Shur-Bond Velcro Brand Fastener # TX1115174.
This Velcro strip measures 1-5/16" wide, and 80" long, however it can be cut down to a shorter length if needed.
If this is not the size you need, let me know what you need and I'd be happy to see if we have something for you. view full answer...
I would need to know the model number or the name of your Extang tarp because there isn't just a single Extang tonneau cover that fits an '02 Ranger, there are many. If you can get back to me with that information I'd be happy to try and find you the correct tarp. view full answer...
Go To Results