Hey Rodney, good question so there isn't a single harness that will do both a tow bar lighting and trailer wiring solution but you can install both at the same time. So for trailer wiring you could use the Tekonsha part # 118786 and then for the tow bar lighting kit you'd want the part # C96JR. Basically the two kits would plug into each other and then back into your vehicle. view full answer...
Hey there Tyler; thanks for the question and we can get the 2021 Ford Ranger set up to be flat towed behind your motorhome. In regards to the tow bar, since the Ranger weighs not even 4,500 lbs you definitely don't need to spend more money to get the 10k tow bar, a less-expensive (but just as effective) option is what I would go with. As for the brakes are you talking about your motorhome? If it's a Ford F-550 it will have hydraulic brakes and not air brakes. So all that said, here are... view full answer...
Hey John, for your 2024 Ford Maverick you can use the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 with the Roadmaster Battery Charge Line Kit for Towed Vehicles # RM-156-25 for the wiring kit.
If have everything else needed for flat towing you can ignore this, but if you don't you're also going to need:
- A base plate kit # RM97RR,
- A tow bar # RM-676,
&
- A braking system # RM-9060-900002, with the custom seat adapter # RM98FR and the brake lite relay kit... view full answer...
Hi Michael,
We can get your 2007 Chevy Tahoe set up to be flat towed behind your Winnebago motorhome, and for base plates and a tow bar I recommend going with Blue Ox as the base plates will fit both the hybrid and non-hybrid versions and their tow bars have a higher capacity than most, which is needed for a big SUV like your Tahoe.
For wiring and the brake system though, Roadmaster is what I like the most because we've seen over time the quality of both parts of the flat tow systems,... view full answer...
In order to flat tow your 2006 Chevrolet Trailblazer EXT you will need base plates, a tow bar, safety chains, wiring, and a supplemental braking system. I recommend the following:
-Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 3109-1
-Roadmaster Falcon 2 Tow Bar # RM-520
-RoadMaster 68" Single Hook, Coiled Safety Cables # RM-643
-Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267
-Blue Ox Patriot Radio Frequency, Portable Braking System # BLU37TR
I don't... view full answer...
Aside from the Demco SBS Stay-IN-Play DUO item # SM99251, to flat tow your 2024 Jeep Wrangler 4xe you will need the following parts:
Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar item # e74ZR
Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-521453-5
Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 or item # RM63MR if you have the ParkSense proximity sensors
High Low Adapter - The tow bar needs... view full answer...
Yes, there is! The Roadmaster Direct-Connect Base Plate Kit item # RM-523182-5 is going to be the best option. It has a specific set of instructions related to the ZR2 models. I have linked them below so you can take a look at it.
Here are the rest of the parts you will need to flat tow your 2020 Chevy Colorado ZR2 Bison:
Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643
Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item... view full answer...
Hi Gary; thanks for the question and I googled the owner's manual to find out, and your 4x4 2017 Ram 1500 is indeed able to be flat towed with all four wheels on the ground per the owners manual. Here are all the parts you'll need to do so:
- Base Plate Kit: Demco Classic Base Plate Kit # DM9517335
- Tow Bar: etrailer XHD Non-Binding Tow Bar # e94ZR
- Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267
- Supplemental Braking System: Demco SBS Stay-IN-Play DUO... view full answer...
Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your 2024 Ram 1500 with a tow bar like the Sterling # RM-576:
- Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-522203-5
- Wiring Kit: Roadmaster Wiring Kit # RM-15267
- Supplemental Braking System - MOTORHOME WITH HYDRAULIC BRAKES:... view full answer...
Hey Robert, for your 2016 Jeep Wrangler using the Ready Brute Elite II tow bar you can use the Blue Ox Base Plate Kit # BX1126 with the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars # BX88297.
From here, to complete your flat towing setup you'll just need a braking system # BLU37TR with the 12V outlet kit # RM-9332, and a set of tow bar wiring # TL21RK. view full answer...
We don't make one big kit but I have listed all of the parts you will need to flat tow your 2017 GMC Terrain SLE behind your RV below:
Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates item # e74ZR
Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-523184-5
Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267
Supplemental Braking System - Supplemental Braking System... view full answer...
Hey Richard; thanks for the question and we can get your 2018 Ram 1500 Tradesman set up to be flat towed. There are a number of parts you'll need so I'll go ahead and list them out for you below:
- Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-52289-5
- Tow Bar: etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates # e84ZR
- Wiring Kit: Roadmaster Wiring Kit # RM-15267
- Supplemental Braking System: Demco SBS Stay-IN-Play DUO Supplemental Braking System... view full answer...
Hey Terry,
The Blue Ox Avail Non-Binding Tow Bar # BX7420 is rated for 10,000lbs so it would be capable of handling the weight of your 2012 Chevy Silverado 2500HD. To attach it to your truck you'll need a Blue Ox baseplate like part # BX1694. This replaces your factory tow hooks, or would sit where they would if you don't have them.
If you haven't picked out the rest of your flat towing equipment then I have the following recommendations:
Braking System: If your motorhome has hydraulic... view full answer...
To tow your 2023 Ford Maverick behind your motorhome, the correct wiring is the following:
- Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267
To tow your '23 Maverick you'll also need base plates # RM97RR, a tow bar # RM-522, safety chains # RM-645, braking system # SM99251, charge line kit # RM-156-25, and brake-lite relay # RM-88400. view full answer...
It sounds like you have a Roadmaster Falcon 2 tow bar # RM-520 which has a towing capacity of 6,000 lbs. I looked up the weight of a 2018 Jeep Grand Cherokee and it would weigh between 4,500 and 5,300 lbs so it would easily have the needed capacity.
So for a base plate kit for the Grand Cherokee you would want the # RM-521440-5 which is a confirmed fit, easy to use, and compatible with the Falcon 2. The price for this is available at the links below.
For lighting/safety cables, locks,... view full answer...
Hey Dwight, since you have a Blue Ox tow bar currently the base plate kit you would want is the Curt part # C88FR which was designed to work with Blue Ox tow bars.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your... view full answer...
Hello Ron, thanks for reaching out. Setting up your 2004 Wrangler to flat tow will be pretty straightforward. I recommend that you go with our etrailer brand for the base plate and tow bar. These are made for us by Demco, so you get a great USA made tow bar and they are priced a bit lower than other name brands. Here is what I recommend:
- etrailer Invisible Base Plate Kit - Removable Arms # e98946
- etrailer SD Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,000 lbs # e34ZR
- Roadmaster... view full answer...
The Blue Ox Base Plate Kit # BX1728 you found is what you need to flat tow your 2017 GMC Acadia Denali AWD using the Blue Ox Avail Non-Binding Tow Bar # BX7420. You would want to use the Flat Tow Wiring Kit # RM-15267 to integrate your tail lights to operate off the tow vehicle. And you will need a supplemental braking system like the Brake Buddy Select # HM39524 due to the weight of your Acadia. view full answer...
Hey Darin, so the Roadmaster Nighthawk tow bar part # RM-676 is a really great tow bar that will work great for you so what you would need is the correct Roadmaster direct connect style base plate kit to use with it. If you have the standard bumper you'd just need the # RM79RR or if you have the Ford Performance bumper you'd need the part # RM92ZR.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into... view full answer...
Hey James we do have what is needed to flat tow a 2012 Chevy Equinox but what you need is a base plate kit for the front of the vehicle and not a front hitch. For a base plate kit that is confirmed as a fit we have the Roadmaster part # RM-523160-5 which provides the connection point for a tow bar like the Falcon All Terain, # RM-522.
For lighting/safety cables, locks, and covers for the tow bar we have the Roadmaster Falcon All Terrain kit part # RM-9243-1 which comes with all of that... view full answer...
Go To Results