The quick splice connectors that come with the 4-way trailer wiring kit that fits your 2005 Ford Explorer Sport Trac part # 18252 is the part # SWC502905-1. This fits 14 through 18 gauge wire. view full answer...
If your 2003 Ford Explorer Sport Trac has the factory 4-Way flat installed, you will need to use the Universal Wiring Kit # ETBC7. This kit includes everything needed to install a fully functional 7-Way from your existing 4-Way, along with the additional wiring needed for a trailer brake controller. I have attached a great article that details the installation steps for this kit and a video on your 2003 Explorer Sport Trac that you can use for reference.
With the 7-Way connector installed,... view full answer...
Test the pins of the connector you found with a circuit tester like part # PTW2993. If you find that one of the pins has voltage when the brakes are applied and the other is hot all the time the # 3035-P will fit and work well. The blue wire would need to be ran back to the blue wire of the adapter part # 37185 to complete the circuit there though.
If there isn't voltage there then you would need to instead use the part # ETBC7 which converts the 4-way to a 7-way and comes with all of... view full answer...
The BAK Replacement Underside Buckle Bases and Straps with Clips for BAKFlip Truck Bed Tonneau Cover part # PARTS-356A0003 are the replacements you are looking for. This will take care of the strap, buckles and hardware to refresh your storage straps on your cover. view full answer...
The most popular towing mirror option for your 2010 Ford Explorer Sport Trac is the # CM11980, which clips onto stock mirrors that have a lip or gap between the glass and mirror housing. I have included a link to a video review of this mirror for you.
These mirrors are very stable, are easy to install, and will last a long time which is why I recommended them for you. The mirrors you mentioned are for taller mirrors so they would not work for you. view full answer...
I am not sure of the particular video you are referring to, but if your 2007 Ford Explorer Sport Trac is equipped with the 7-Way connector, then installing a trailer brake controller is a simple, plug-and-play installation. For this application, you will only need the Plug-In Adapter # 3035-P to install a Tekonsha brake controller like the excellent Prodigy P3 # 90195 (which is what I recommend when you are ready for the install). One end of the adapter will plug right into the brake controller,... view full answer...
In order to add towing mirrors to a 2008 Ford Explorer Sport Trac, you will need to use a universal fit option because there are no custom fit mirrors available. One of the most popular universal towing mirrors is the CIPA Clip-on mirror, # 7070 because of how easy it is to install and how stable it is. I have included a link to a video that covers these mirrors and a link to all of the universal towing mirror options for you. view full answer...
Your 2008 Ford Explorer Sport Trac should come with a 4-way already installed. All you would need to convert it to a 5-way would be a # 20036.
Next you will need to do is figure out where to run the fifth (blue) wire of the # 20036. Most likely this wire is used for a reverse lockout for surge brakes, or reverse lights. If this is the case you will need to tap into the reverse light circuit of your vehicle using the included quick-splice. I attached an installation video for the # 20036... view full answer...
For your 2002 Ford Explorer Sport you will use the Curt Trailer Hitch Receiver part # 13540. This was custom designed for use with the Explorer Sport or two door model. The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75112 was designed for use with the Ford Explorer Sport Trac which was a slightly different model and will not fit your Ford Explorer Sport two door.
If you'll be hauling a trailer use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part... view full answer...
I checked with Curt and the Curt Front Mount Trailer Hitch # 31545 has been confirmed to fit all models of the 2008 Ford Explorer Sport Trac so it would work on yours that has the Adenalin package as well. view full answer...
You can do two things to help reduce travel trailer sway.
First, you can try loading your gear in the camper further forward. This will increase tongue weight and reduce the tendency for the camper's rear end to sway. The more of the trailer's weight that is forward of the axle the less likely it is that the rear end will start its own travel plans!
Another step you can take is to install a friction sway control unit like the ProSeries # 83660. This unit can mount on either side of your... view full answer...
For your 2005 Ford Explorer Sport Trac we have the Roadmaster base plate kit part # 474-1 which is a confirmed fit. It does not attach to the stock tow brackets though. Since your vehicle is a 2005 that means there will be some frame drilling to install this kit. Check out the attached install instructions for more info on that.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular... view full answer...
All of the Class II ball mounts out there have a 3/4 inch diameter ball hole. It might be the best solution for you to replace the ball you have with one that will fit that ball hole size like what comes with the # 36065 that you mentioned.
For a 2 inch ball you'd need the # C40018 or for a 1-7/8 inch ball # C40001 and you'd be set. view full answer...
Unfortunately they have not made a hitch for your 2010 Ford Explorer Sport Trac. This is similar to a situation we have with newer Suburban and Yukon models. Since all of the models come factory with a 2" hitch installed the aftermarket manufacturers just don't produce any because there really isn't any demand in most cases.
I do understand wanting to get all out of your rig that it has to offer. With it having a stated 7,100 lb. towing capacity from the manufacturer it is likely the hitch... view full answer...
The black wire of the 7-way adapter part # A10-7084VP that you referenced is normally the circuit associated with charging a trailer battery. That said the yellow wire could be too as long as you wired up the trailer to match.
From the adapter to your vehicle battery you will need to run 10 gauge wire like part # 10-1-1 (sold by the foot) through a breaker like part # 9510. view full answer...
To upgrade to a 7-Way trailer connector on your 2002 Ford Explorer Sport Trac and to add a brake controller, I recommend that you use the 4 and 7-Way installation kit # ETBC7. It comes with everything you will need to wire in a 7-Way and provides the wiring to install a brake controller. I have included some links that explain how to install an ETBC7 kit.
For a brake controller, I recommend the Tekonsha P2, # 90885. This is one of our most popular controllers because it is easy to set... view full answer...
We currently do not have any custom fit towing mirrors for your 2004 Ford Explorer or Explorer Sport Trac but we do have a wide selection of universal towing mirrors, see link to the right, that you could potentially use.
The most popular option, # KS3891, clips onto stock mirrors that have a lip or gap between the glass and mirror housing. I have included a link to a video review of this mirror for you. view full answer...
We do have a solution for a bike rack and cargo carrier; your best option would be to use the Yakima EXO Swing Away 2 Bike Rack w/ Enclosed Cargo Carrier - 2" Hitches # Y34ZR because this has a 40 lb per bike capacity and the carrier has a 100 lb capacity, which suits your needs perfectly. The cargo carrier can also be removed from the rack and can be used on its own. This cargo box is enclosed. We also have this combination with an open cargo carrier Yakima EXO Swing Away 2 Bike Rack... view full answer...
Yes, electric brakes like the # 23-468-469 can be used on boat trailers that see salt water and fresh water. It's a smart idea to unplug the trailer wiring before backing the boat into the water but we realize most people do not do this.
The part # 23-468-469 that you referenced is a set of self adjusting brake assemblies that fit 3,500 lb axles that are 10 inch in diameter. view full answer...
For your 2003 Ford Explorer Sport Trac, the Rightline Truck Bed Tent - Waterproof - Sleeps 2 - For 5' Mid-Size Short Bed # RL110765 will be too big for the 4.2 foot bed of your Sport Trac.
Another option is to use a roof rack consisting of Thule WingBar Evo Crossbars # TH711420 abd Evo Raised Rail Feet # TH710401. Then adding locks # TH450400. Utilizing a roof rack you can use the Yakima SkyRise Tent for Roof Rack Crossbars - 3 Person - 600 lbs # Y07437 or 2 Person- 400 lb # Y07436.... view full answer...
Go To Results