To get the clip of the included pin and clip of the Curt Hitch part # C11124 you will need to basically just need to try various angles of the pin while trying to insert the clip so that you can eventually find the right angle/orientation of the clip so that it will insert all the way into the pin.
You may even try running it up from underneath the safety chain loop if there is access there.
You should also note that you don't have to fully insert the pin. You just need to get it to the... view full answer...
Basically you have two options for hitch pin and clips. Either a locking pin and clip or a non-locking pin and clip for both the 1-1/4 inch portion of the MaxxTow MT70355 and the 2 inch portion.
For the 1-1/4 inch pin and clips you would want either the Pin and Clip # PC2 or the locking version part # 7682.
For the 2 inch portion you would want either the Pin and Clip part # PC3 or the locking version part # 7683. view full answer...
The correct part number you need for a replacement pin and clip for a 2 inch hitch Saris bike rack is the part # SA3021. This comes with a clip and the threaded hitch pin. view full answer...
The 24x60 Cargo Carrier for 2 inch Trailer Hitch, item # e98874, is one of our best selling cargo carriers. We receive very few phone calls regarding this product. Also, the 24x60 Cargo Carrier has a folding AND tilting feature. It has a generous 19-1/2" clearance from the hitch pin when in use and 9-1/2" in the folded up position when not in use. It has a stop collar that automatically aligns the hitch pin holes and a 2" shank rise to add extra ground clearance.
The pin and clip needed... view full answer...
To equip your Escort for towing, you will need 5 parts. A hitch, ball mount, pin and clip or hitch lock, trailer ball, and a wiring harness to supply lighting for your trailer.
I recommend the Curt Class I Receiver Hitch, part # C11105, with ball mount # C45520 and pin and clip # F-4. All you will need is a hitch ball, for that you can use part # 19256. For more security, you could use a hitch lock, part # e98879 in place of the pin and clip. To wire your vehicle for the trailer lighting,... view full answer...
The American Flag Hitch Cover # AUT-FLAG-C you were looking at is designed for a 2" trailer hitch receiver and you would need a 5/8" hitch pin and clip such as the # PC3, or a locking hitch pin such as the etrailer trailer hitch receiver lock # e98880.
I included a few videos of the products mentioned for you to take a look at. view full answer...
The Curt Heavy Duty Forged Ball Mount # C93JR does not include a hitch pin and clip. I have sent in an update to have that corrected, thank you for pointing out the error on our site. We have a few options depending on what you are looking for. The basic Hitch Pin and Clip # 337HP6256WC is most common. As you mentioned your 2020 Chevrolet Silverado 2500 you should consider the BOLT Trailer Hitch Receiver Lock # BL7023582 as you will be able to code it to your center cut truck key so you... view full answer...
The stow pin for the Trailer Valet # STC-V211 that you referenced is basically just a Class III hitch pin and clip like the part # PC3. The # PC3 or a similar pin and clip would work well. view full answer...
While I would not recommend using a different clip, and the L-Pins do not come with a different hole size, I do have a solution. Since you have the Fastway e2 Weight Distribution # FA92-00-0600 you can use the Replacement L-Pins and Clips for Equal-i-zer Weight Distribution Systems - 6K to 14k - Qty 2 # EQ95-01-9430.
Equal-i-zer and Fastway are the same company, and these clips are compatible with your system. These L-Pins have an integrated clip to secure the pin. Instead of having to... view full answer...
With the Trailer Hitch Receiver Adapter # HTAD you will need a 1/2" Pin and Clip # PC2 and a 5/8" Pin and Clip # PC3 to use it with your hitch mounted accessory. I recommend a locking set like the BOLT locks. I see you have a 2006 Toyota Prius which will use the 1/2" Lock # BL7023629 and 5/8" Lock # BL7023584 that will key to the side cut key on your Prius so you will not need an additional key.
You can use these with the Roadmaster Quiet Hitch 1-1/4" # RM-061-125 and 2" # RM-061 to remove... view full answer...
If you want just a regular hitch pin with clip to secure the University of Oregon hitch cover # AMG102639 then you can use # PC3. But what I recommend is a locking hitch pin, # e98880, because it will secure the cover in the hitch but also deter theft! I have linked video reviews of the pin and lock for you. view full answer...
A regular hitch pin and clip would work to keep the cover in the hitch. If your trailer hitch is a Class I or II with a 1-1/4 inch wide receiver then you would use pin and clip # PC2. For Class III, IV, and V receivers you would use # PC3.
The other option is to go with a lock. For a Class I or II hitch you could use # e98879. For a Class II, IV, or V you can use # e98881.
A regular pin or a lock will go through the hitch receiver and through the holes on a hitch cover securing the cover... view full answer...
Aside from the South Carolina Gamecocks Hitch Cover # CTHO63 he would need a pin and clip to secure the cover to his hitch. For just a standard pin and clip he would want part # PC3.
Another option would be to get a locking hitch pin like part # e98880 to deter theft. I attached a review video for this product for you to check out also. view full answer...
We have a really cool solution for you, but you should not use a round linchpin as they are not designed for use with a standard 2 inch trailer hitch receiver. So you'll want to go with a standard hitch pin, and we do have an option for one that is super simple to use and doesn't have an R-clip like the Curt Pin & Clip # C21510, for example.
In fact, it doesn't use a clip at all, and the part I'm referring to is from Master Lock, and it's called a Pivot Lock, which is available in either... view full answer...
If you're looking for something different than the Replacement Pin and Clip # AM3430 from Anderson then you might try out the Gen-Y Hitch Pin and Clip # 325-GH-096 which has similar dimensions and will work great! This pin and clip is designed for use with the Gen-Y heavy duty ball mounts and accessories
Attached is a review video for you to check out! view full answer...
For replacement pins that hold the balls of the # C45900 to the shank of the assembly we have the part # C45925 which comes with 2 pins and 2 clips. We do not have them individually though. view full answer...
For your Fastway e2 weight distribution system the part # FA92-03-9205 is the correct L-pin and the # FA92-04-9208 is the correct L-pin clip. view full answer...
Reese does not offer the spring bar retainer clips like you have referenced. The really good news is that you can use either the Replacement Spring-Bar Release Clip # FA94-02-1059 or Curt # 17109. These clips will work as replacements for the hitch you have pictured. view full answer...
The EcoHitch Invisi Trailer Hitch Receiver # 306-X7257 for your 2015 Subaru WRX does not include a trailer wiring harness or pin and clip. It is simply the trailer hitch and the needed hardware to install it. None of our trailer hitch receivers include the wiring harness needed for towing.
To add a trailer wiring harness I recommend the Curt T-Connector # C56259 that will plug right into factory ports behind the driver and passenger side tail lights. You will also need to run a hot lead... view full answer...