Is Wiring Harness Included with EcoHitch Trailer Hitch for 2015 Subaru WRX
Question:
Hello I was just wondering if this hitch came with anything else like the wiring for a trailer you’d need or the clip and pin? Or is it just the hitch I see in the picture
asked by: Logan
Expert Reply:
The EcoHitch Invisi Trailer Hitch Receiver # 306-X7257 for your 2015 Subaru WRX does not include a trailer wiring harness or pin and clip. It is simply the trailer hitch and the needed hardware to install it. None of our trailer hitch receivers include the wiring harness needed for towing.
To add a trailer wiring harness I recommend the Curt T-Connector # C56259 that will plug right into factory ports behind the driver and passenger side tail lights. You will also need to run a hot lead up to the vehicle's battery. This will provide you with a 4-Way connector to connect with and power a trailer's basic signal lights.
I have attached an installation video that you can use for reference.
To pull a trailer you will also need a ball mount like the Curt # D-4, Hitch Pin and Clip # PC3, with a compatible hitch ball that matches the trailer's coupler such as the 2 inch # 63845 or the 1-7/8 inch # 19260. This particular ball mount includes a hitch pin and clip.
I have also attached a great article on finding the best ball mount for your setup in case the rise/drop on this unit is not sufficient to pull your trailer level.
Products Referenced in This Question
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Completely Hidden
- EcoHitch
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Is EcoHitch Invisi Hitch Receiver Available for a 2023 Subaru WRX
- Q&A: EcoHitch Invisi Trailer Hitch Vs. Draw-Tite Class I Sportframe For 2019 Subaru WRX STI
- Q&A: Receiver Depth on EcoHitch Invisi Trailer Hitch Receiver # 306-X7257
- Q&A: Totally Hidden Trailer Hitch that Fits 2020 Subaru WRX
- Q&A: Fit of EchHitch 306-X7257 Hitch on 2017 Subaru WRX With Aftermarket Exhaust
- Q&A: Does Curt Trailer Hitch For 2022 Subaru WRX Come Out Under the Bumper or Through Bumper Cut Out
- Q&A: Availability of 2 inch Hitch for 2015 Subaru WRX
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Rooftop Cargo Carriers
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: How to Choose a Bike Rack for a Sedan or Hatchback