According to my technical contact at Air Lift, when the AirLift 1000 Springs # AL81260 are deflated the outside diameter is approximately 10 inches long and 3-1/4 inches in width. view full answer...
If by "ID" you mean the inner diameter of the hand sprayer hose in the Hand Sprayer Installation Kit # DOM75FR then the inner diameter of that hose is .35" or 11/32. view full answer...
The Dometic Replacement Toilet Seat # DOM85FR measures 5-1/2" center to center of the mounting holes, 15" wide, and 18" long as you can see in the included diagram.
I included a video of the # DOM85FR for you to take a look at. view full answer...
Often RV hitches have a sticker or other markings to indicate their Class Rating and actual weight capacities. The 3500-lb capacity you mention could indicate a Class II hitch. If it has a 1-1/4-inch receiver opening then it is a Class II. If it has a 3500-lb capacity and a 2-inch opening then it is most likely a Class III hitch.
If the hitch was original OEM equipment on the motorhome you can confirm the hitch class/ratings by contacting the motorhome maker with the unit's VIN.
We offer... view full answer...
The total width of the # SP501L ladder is 12-3/4 inches. This is the outside measurement of the step pads since that's the widest point. The actual dimension of the step that's usable for your foot to land is about 10 inches between the uprights. view full answer...
According to Roadmaster, a tow dolly like the Roadmaster # RM-2050-1 has a tongue weight of roughly 80-lbs because of the way it was engineered. If you've got a different brand of tow dolly, you will want to use a tongue weight scale like the etrailer # e99044 to determine what the true tongue weight of that is. view full answer...
Yes, the SumoSprings Solo Custom Helper Springs part # SSR-130-54 have a shipping weight of 7 lbs. If you need anything else please feel free to let me know. I have attached a review video for you as well. view full answer...
I have a solution for you but there are no D-ring adapters for the etrailer XHD Non-Binding Tow Bar item # e94ZR. I recommend using a Roadmaster Tow bar which we do have D-Ring adapters for. The Sterling All-Terrain Tow Bar item # RM-576 has a 8,000 lbs capacity and the Blackhawk Tow Bar item # RM-422 has a 10,000 lbs capacity.
With one of these tow bars you can use the D-Ring adapters item # RM-035-1 for 1" thick rings or item # RM-035 for 3/4" thick D rings.
With either one of these... view full answer...
I went out to the warehouse to measure the Replacement Hose Washers with Screen # W1526VP for you. The overall diameter is 0.98 inches. The overall height including the screen is 0.5 inches. And the thickness of the washer material is 0.16 inches. All the hose washers we have will have these same or very similar measurements. I have included a picture showing the measurements. view full answer...
Here are the dimensions for the Roadmaster Adapter Kit for Blue Ox Motorhome Mounted Tow Bars, part # RO64FR.
pin size = 3/4"
pin length = 5"
measurement from inside lip to the end of the pin = 4" view full answer...
The Go Power Cable Entry Plate w Red and Black MC4 Cables 7' Long # 34276245 comes with 10 gauge wires. I confirmed this with the manufacturer for you. view full answer...
Yes, it would. The snap pin that comes with the Demco Slide-Lok Trailer Coupler item # DM05557-81 has a 1/4" diameter so the etrailer Adjustable Trailer Coupler Latch Lock item # e98883 would be your best option. view full answer...
All of the RV ladders we offer are considered universal style ladders which means they are designed to fit as many standard applications as possible but they aren't test fit on anything specific. I was able to pull up pictures of the ladders installed on the rear of your 1998 Fleetwood Jamboree and it appears to be a very standard setup like what the Stromberg Carlson part # LA-401 you mentioned would fit. This ladder is 99-1/2 inches tall but can be trimmed down to a shorter length if needed. view full answer...
The Roadmaster # RM-522 Falcon All Terrain tow bar has a capacity of 6000 lbs. From what I read online, the 2021 Grand Cherokee would weigh a maximum of about 5000 lbs. You'll want to leave about a 1000 lb cushion for safety, so unless you'll be towing your Grand Cherokee completely loaded down with gear, the # RM-522 Falcon All Terrain would be a great choice for you. If you did need a higher capacity, the Roadmaster # RM-576 Sterling Tow Bar you'd looked at would also be a great choice.
You'll... view full answer...
The distance on center between the bracket mounting holes of the Roadmaster Polyurethane Bushing Kit # RM-4139-300 that you referenced is 4-1/8 inches. view full answer...
You are correct, 4 bikes at 35 lbs would exceed the overall capacity of the Swagman Trailhead 4-Bike Rack for 2" Hitches - Fixed Base # S63381. The overall weight capacity of the rack is 100 lbs. It is capable of holding four bikes, just not four 35 lbs bikes. The 35 lb limitation is for each mounting point for a bike on the carrier.
So, you could carry four 25 lb bikes without any issues. You could also carry two 35 lb bikes and a 30 lb bike. Any combination works as long as you do not... view full answer...
The Ultra-Fab Skid Wheels # UF48-979013 don't have a weight capacity because they are not meant to be load bearing. They merely take the hit that the back end of your motorhome would otherwise be getting.
These are designed to be used for a Class A RV that is 34' or longer. To install them you will first need to have the brackets welded to your RV and then you bolt the skid wheels to the brackets using the included hardware.
I have attached a review video for you to check out as well... view full answer...
Yes, it will! The Adjustable Width Trailer Hitch Receiver item # C13704 has been confirmed to fit all models of the 2023 Fleetwood Fortis that was built on a F53 chassis. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. view full answer...
I went down to the warehouse to check out the LaSalle Bristol 14-3/4" x 12-1/4" Rectangular Lavatory Sink # 34416186PWA so I could gather all the info you requested.
You are correct that the 14-3/4" measurement is side-to-side and the 12-1/4" measurement is front-to-back; the sink is also approximately 5" deep.
It has one center drain hole and no overflow with three faucet holes that measure 2" apart on center. It is made of ABS plastic and the color is a glossy white. view full answer...