With your Wooken E-bikes weighing in at 71lbs the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes # HLY84FR would be a great option. This rack has an 80lb per bike capacity and is rated for motorhome use. The wheel hoops are designed to be able to handle the fat tires of your bikes without needing to purchase an adapter. To prevent theft the ratcheting hooks that hold the frame of your bike also have built in locks and a keyed alike hitch pin lock is included as well. view full answer...
From what I could find out, it looks like your 2020 Fleetwood Bounder was pre-wired for a brake controller. With that being said, you should not need to run anything to get the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR powering the brakes on a tow dolly.
However, you will need the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED87FR that will plug into a port under the dash and the Adapter 4-Pole to 7-Pole and 4-Pole # 37185 if you do not already... view full answer...
The 2014 Fleetwood Bounder M-35K Class A motorhome is built on a Ford F-53 V10 chassis and has a GVWR of 22,000-lbs. For this motorhome the correct rear anti-sway bar is Roadmaster part # RM-1139-149 which installs without drilling and that works along with the factory anti-sway bar which remains in place.
Please refer to the two linked video for more on this product's features and installation.
Part # RM-1139-145 is for RVs with a lower GVWR. view full answer...
You do indeed have to use the fittings that come with the HydroMax RV Fresh Water Pump - 12 Volt - 3 Gallons Per Minute - 55 psi # P25201. view full answer...
If you didn't get an alignment when you got your new tires I would start there. The wondering issues could very easily be fixed by having the front end on your 2014 Fleetwood Bounder 35K aligned. If you have had an alignment done I would check to make sure your steering stabilizer is properly installed and functioning correctly. Another issue could be improper air pressure.
If you are mainly concerned about your front end and steering I would start with the SumoSprings Rebel Custom Helper... view full answer...
In order to find the correct slide out motor for your 2005 Fleetwood Bounder Motorhome you'll need to first check your current motor for identifiers. Each motor will have a tag on the motor section and gearbox section that we can use to identify a replacement. Some times they do get worn/damaged over time or even painted over so you may not find a tag but without it we have no way of finding a replacement other than you reaching out to a local RV dealer to get access to OEM parts.
I've... view full answer...
The gutter extensions that we sell are all the same design where you'll have to unscrew the ends of the gutter enough to slip the extension # CAM42452 behind it and then you would screw the gutter back in place securing the extension with the same mounting screws for the gutter. You'd then want to reseal the top of the gutter with some non-sag sealant # 344270341437-1 (white) or # AL53KV (black) to prevent any water from leaking in behind the gutter. view full answer...
You absolutely have the right SumoSprings for your 2003 Fleetwood Pace Arrow 37A on a Ford F-53 chassis. The part number you mentioned is for the front springs, but I do recommend adding the rear springs as well, or starting with the rear and then adding the front if needed.
The correct fit for your motorhome for both the front and rear is the following:
- Rear: SumoSprings Maxim Custom Helper Springs # SSR-187-54-1
- Front: SumoSprings Rebel Custom Helper Springs # SSF-172-40-2
The... view full answer...
Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes Item # RM-RBK25-RSSA is actually the wrong steering stabilizer for your 2019 Fleetwood Bounder on the 35K F-53 Chassis with the V-10. That's why it is touching. It has an extra plate welded in the center of that bracket. You need Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes
Item # RM-RBK22-RSSA. This is designed for the 35K F-53 with the V-10 engine.
I have provided... view full answer...
the Replacement Toilet Bowl Seal Kit for Dometic Sealand and VacuFlush RV Toilets # DOM35FR is designed to work with Dometic, SeaLand & VacuFlush RV toilets from 2000 or earlier, and will not work with your Dometic 503 toilet.
Instead, take a look at the Replacement Toilet Bowl Seal Kit for Dometic 200 and 500 Series RV Toilets # DOM53FR, which is designed to work with the Dometic 200 series and 500 series toilets.
Additionally, this kit also includes 1 flush ball seal and 1 toilet bowl... view full answer...
Yep! The Roadmaster Tow Defender Protective Screening # RM-4750 that you referenced does fit your Roadmaster Nighthawk tow bar part # RM-576 and the Direct Connect base plate kit part # RM-521448-5 that you have on your 2014 Jeep Wrangler. view full answer...
They do, yes; I verified with the manufacturer that the Timbren suspension enhancement does indeed fit your 2018 Fleetwood Bounder 35P motorhome. The correct part numbers for both the front and rear Timbrens are the following:
- Rear: Timbren Rear Suspension Enhancement System # TFRF53A
- Front: Timbren Front Suspension Enhancement System # TFFF53B
These will do a really nice job of giving you a more controlled, stable driving experience in your Fleetwood, engaging as needed, and compressing... view full answer...
The Solera 12V Power RV Awning Conversion Kit part # LC434724 is a universal product which isn't specific to any one particular trailer. In order to confirm compatibility, you need to be sure the brand of your existing awning is a Dometic, Carefree, or Solera which are the most popular so I'd be surprised if this was not what you have. In order to confirm the brand you should see a module name/name somewhere on the arms and or head but I don't have any reference to the provided part numbers.... view full answer...
The Valterra Flexible Tank Wand for RV Black-Water Tank # A01-0187VP was designed to just drop right into the black tank so you will most likely not be able to use it to get through your vacuum style system. Trying to run it through the toilet and then through the vacuum would be quite challenging. The only way it would work is if you had another access hole to the tank or if you ran it up through the dump tube opening of the tank. This way would be quite messy but would give you more of... view full answer...
The correct Roadmaster Exact Center Steering Stabilizer (Replaces the Roadmaster Reflex Steering Stabilizer) for a 2016 Fleetwood Bounder K35 on Ford F-53 Chassis is part # RM33RR. This stabilizer offers a bolt-on fit and will do an excellent job of helping the steering wheel stay centered while out on the road. view full answer...
Yes, I don't see any reason at all as to why the Plunger and Rubber Socket Door Holder part # PLR62-66 would not work with the door on your motorhome. It is designed for an enclosed trailer door which would be much heavier than the one on your motorhome so I don't think you will have any issues. view full answer...
We do indeed have both front and rear air bags for your 2004 Fleetwood Bounder 32W on a workhorse chassis, with the correct fits being the following part numbers:
- Rear: Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88202
- Front: Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88101
These do both have internal jounce bumpers inside the air springs and are going to provide your motorhome with a more level... view full answer...
Your 2008 Fleetwood Bounder 35E could have built on either a Ford F-53 chassis or Workhorse W-22 chassis. You will need to verify your chassis to select the correct kit. If you are unsure the chassis information is located on a decal near the drivers seat.
The Ford chassis will use the SumoSprings Rebel Custom Helper Springs # SSF-171-40-2 for the front and SumoSprings Maxim Custom Helper Springs # SSR-187-54-1 for the rear suspension.
The Workhorse chassis will use the SumoSprings... view full answer...
Your 2007 Fleetwood Bounder Motorhome is on a Ford F-53 chassis therefore I recommend using the Air Lift LoadLifter 5000 Air Helper Springs part # AL57140 for the front and part # AL57410 for the rear. The airbags are going to do an excellent job of reducing strain on your suspension, improving ride quality, and increasing overall stability. If you need an air compressor then I recommend the Air Lift WirelessAIR Compressor System for Air Helper Springs part # AL74000.
In regards to the... view full answer...
I definitely understand where you're coming from, but I can assure you that we list the Curt Trailer Hitch Receiver # C14082 as a fit for your 2016 Fleetwood Bounder 36H because we've done our research and have confirmed it to fit the F-53 chassis on your motorhome.
Sometimes hitches will fit multiple applications and this is one of those cases - so you can be confident you're getting a trailer hitch that fits your motorhome! view full answer...
Go To Results