bing tracking image
Q & A Icon

Part Needed To Activate Tow Dolly Brakes With a 2020 Fleetwood Bounder  

Question:

how does the trailer get power from unit to trailer? Do you have to run a wire back to plug? I have a 2020 fleetwood bounder. will be hooking to a dolly with electric brakes

1

Helpful Expert Reply:

From what I could find out, it looks like your 2020 Fleetwood Bounder was pre-wired for a brake controller. With that being said, you should not need to run anything to get the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR powering the brakes on a tow dolly.

However, you will need the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED87FR that will plug into a port under the dash and the Adapter 4-Pole to 7-Pole and 4-Pole # 37185 if you do not already have a 7 Way on the back of your vehicle. All the needed wires should already be run to the back, and this should be a pretty simple and quick hook up, but you definitely want to test the wires with something like the # PTW2993 to make sure they are correct.

expert reply by:
1
Lazer S

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>