Rear Anti-Sway Bar for 2014 Fleetwood M-35K Class A Motorhome Built on Ford F-53 V10 Chassis

Question

Question:

Item # RM-1139-145 This item says not confirmedinch regarding compatibility. Does this mean it will not work, or is it possible it will work? I have a 2014 Fleetwood Bounder 35K.

asked by: Chris

0

Expert Reply:

The 2014 Fleetwood Bounder M-35K Class A motorhome is built on a Ford F-53 V10 chassis and has a GVWR of 22,000-lbs. For this motorhome the correct rear anti-sway bar is Roadmaster part # RM-1139-149 which installs without drilling and that works along with the factory anti-sway bar which remains in place.

Please refer to the two linked video for more on this product's features and installation.

Part # RM-1139-145 is for RVs with a lower GVWR.

expert reply by: Adam R

0

Answer 1

The Roadmaster Rear Anti-Sway Bar, #RM-1139-145, is designed to retain the factory sway bar on 2006 to 2012 Ford F-35 V10 chassis. This kit comes with all of the hardware that you will need to complete the installation and there is no drilling…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The newer Chevrolet and GM pickup trucks have a known power deficiency issue with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras #FCE48TASL-05. There is likely nothing wrong that you did, the problem is the…

view full answer...

Answer 6

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL24JQ is the best suspension enhancement for your 2024 Toyota Tundra. These air springs feature internal jounce springs which help to eliminate the bouncing which is common with other air bag…

view full answer...

Answer 7

I recommend installing the SumoSprings #SSR-106-47-1 on the rear of your 2023 Ford E-450 Class C cutaway chassis. In my experience I feel these are the best option as they cushion the suspension while the Timbren #TFERSD you found is much stiffer and…

view full answer...

Answer 8

I recommend the Air Lift LoadLifter 5000 Ultimate Air Springs #AL67PD for your 2022 Ford F-150. These air bags have a capacity of 5,000lbs and use an air pressure from 5psi to 100psi. These will not increase your payload or towing capacity but only…

view full answer...

Answer 9

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers item #AL59562 have a maximum capacity of 100 PSI. This kit is verified to fit 2005 - 2015 Nissan Xterras. To better use this air suspension kit I recommend the Air…

view full answer...

Answer 10

It won't. You'll need to use the air bag that fits into the coil spring. Firestone offers the #F4124 Coil-Rite kit which is a fit. I've linked to the installation instructions and a video showing how the system works.

view full answer...

Answer 11

Hello Brad, we have exactly what you are looking for! You can use the Curt Adapter Rails #C88KR. This will attach directly to the OEM puck system (the 5 pockets) in the bed of your 2024 Chevy, and it will give you the industry standard rails you can…

view full answer...

Answer 12

For your 2004 Class C on a Ford E450 Van Cutaway Chassis, I'd recommend the #RM-1139-147 for the rear sway bar and #RM-1139-115 for the front sway bar. To smooth out the bumps, the SumoSprings #SSR-106-47-1 would be a good choice. If your Class C…

view full answer...

Rear Anti-Sway Bar for 2014 Fleetwood M-35K Class A Motorhome Built on Ford F-53 V10 Chassis

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching