Expert Answers about Entegra Coach

• Recommended Bike Rack With a Ramp for a Toyota RAV4
• It's a bit pricey, but I think the Thule Epos Bike Rack for 2 Bikes # TH99XE with the Extra-Long Loading Ramp for Thule EasyFold XT # TH933402 is a great choice. This bike rack will fit into any 2" trailer hitch, has a 140 lbs capacity, and can handle up to a 3 3/16" wide tire.
  view full answer...


• Recommended Trailer Hitch for Bike Rack and Towing for 2022 Kia Telluride
• For your 2022 Kia Telluride I recommend the Curt Trailer Hitch Receiver # C13420. This is a Class III hitch with a 2" receiver. It has a maximum gross trailer weight of 5,000 lbs and tongue weight of 750 lbs which will be great for your bike rack and towing your trailer. It also has a concealed cross tube to help maintain the factory look. Since you will be towing your trailer, I also recommend the Curt # CU94FR. This wiring harness plugs into existing wiring and will give you a 4-way...
  view full answer...


• Trailer Hitch Receiver for 2021 Lance 2285 Travel Trailer Capable of Holding 500 Pounds
• On a travel trailer like your 2021 Lance 2285 the go to hitch is typically the Adjustable Width Trailer Hitch Receiver # 13703. This hitch fits frames from 22-72" wide. However, this Class III hitch tops out at 350 lbs of tongue weight. In order to reach the 500 lb capacity you will need a universal Class V hitch like the # C59CR. This fits frames up to 62" wide so you will need to measure. I have attached some review and installation videos below for your reference.
  view full answer...


• Replacing The Electric Brakes On A 1965 Streamline Empress
• That is a very neat trailer! I am happy to try and help you along. With an axle that old, it may prove very difficult to find parts that are directly compatible. A lot of parts they used back then are more or less obsolete now. A majority of the electric bake kits we sell will use either a 4 or 5 bolt flange. We do not offer any brakes that use a 6 bolt flange. That said we may still have some options for you. We do offer replacement spindles with a pre welded brake flange like part #...
  view full answer...


• Fifth Wheel Hitch Recommendation that is Easy to Connect and Disconnect from Trailer
• The Reese part number RP30073 is a now discontinued under bed rail kit and not a fifth wheel hitch like it sounds like you are looking for. With that said since you are wanting a hitch that has a pivot built into the head and allows for an easier connection and disconnection the B and W Patriot part # BWRVK3255 would be a really great option. This is an American made hitch that is big favorite because of how well it's made and how easy it is to use. It would be a lot easier to connect and...
  view full answer...


• Brake Controller Recommendation for a 2023 Mazda CX-50 with OEM 7-Way Harness
• - SEE SOLUTION UPDATE WITH PART # C32FV IN COMMENT SECTION BELOW - I have a brake controller recommendation but at this time it doesn't look like we (or our manufacturers) have any information or at least an adapter harness to fit with the wiring you have under the dashboard on your 2023 Mazda CX-50. I recommend checking out the Redarc Tow-Pro Elite # RED44FR for your application because the only part of the controller that will be visible is the small control knob - this not only gives...
  view full answer...


• Does Vitrifrigo DP150i Double Door RV Mini Fridge w/ Freezer Have a Damper Door
• Hey James, thanks for reaching out! The Vitrifrigo DP150i Double Door RV Mini Fridge w/ Freezer # VT94FR does not have a damper door. I confirmed this with my contact at Vitrifrigo.
  view full answer...


• License Plate Bracket Recommendation for a Kuat Sherpa 2.0 Bike Rack
• Thanks for reaching out, Brian! I do have a few solutions for you to get your license plate more visible while using your Kuat Sherpa 2.0 bike rack. For your application I recommend checking out the Yakima PlateMate # Y02713 and the Thule License Plate Holder # TH35JV. The PlateMate is a bit more versatile in how it can be installed, but the Thule option has a light with it so your license plate can be seen at night. Both come with straps to secure the holder and while the straps might...
  view full answer...


• Curt Weight Distribution System that Would Work with Trailer that Weighs 6,000 lb
• Hey Dwayne, yeah you'd need a higher rated weight distribution system as you'd be above the tongue weight range of your current system. The Curt Trunnion system part # 17301 would be a solid option as it has a 600-800 lb tongue weight rating.
  view full answer...


• Will Blue Ox Weight Distribution with BXW4008 Bars Work with 2024 Forest River 8337RL
• Hey Steve, I looked up the specs of your 2024 Forest River 8337RL and based on that the Blue Ox weight distribution system that you have now would work great.
  view full answer...


• Recommended Maxxfan Rain Cover
• To add a rain cover to the MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan item # MA00-04301M, you will want the MaxxAir FanMate RV and Trailer Roof Vent Cover Smoke item # MA00-955003 or item White # MA00-955001. The integrated mounting brackets on the FanMate line up with the mounting tabs that are molded onto the flange of the roof vent.
  view full answer...


• Replacement Monitor for a Voyager VOM-873CT and Other Parts That May Be Needed to Switch to Color
• I tried looking up the cameras you would have, but I could not find anything definitive to indicate if they would be in color or not. Obviously having to get all new cameras would not be ideal. You could start with the Voyager RV LCD Observation Monitor # VO34FR and the adapter # 31100041. Test it with you current cameras, if they are in color then you are good to go. If they are in black and white, then you would need new cameras. - Voyager Rear Camera # VCMS17B - Voyager RV Side Camera...
  view full answer...


• Recommended Roof Rack System For A 2020 Ford Escape With A Panoramic Roof
• Since you don't have any mounting points you'll have to use a clamp-on style roof rack system. The bases for these style roof racks come with rubber pads to prevent any scratching. For your 2020 Ford Escape I recommend going with a Rhino Rack system which will require the following components: Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # RR84TB Since you don't...
  view full answer...


• Will the Husky Silver Series 26K # HT31318-31325 Fit the Same Base Rails as a Husky 16K EZ Roller
• The Husky Silver Series 26K HT31318-31325 is compatible with industry standard base rails like what come with the Kit # C16443-204 for your 2004 Ford F-250. Since the Husky EZ Roller uses base rails with the same attachment points you will have no issues using the 26K with your current setup. I have attached a photo of the measurements for standard base rails that you can use as a confirmation.
  view full answer...


• Parts Needed to Tie Light Bar Into Reverse Light Circuit on a 2018 Ford F-150
• The Rampage SuperBrite LED Tailgate Light Bar # RA960134 that you purchased has a 4-Way Flat connector on it which receives the stop, turn, and tail signals from your 2018 Ford F-150. If you are wanting to also tie in your reverse signal then you will want to use 16 Gauge Wire # 16-1-1 along with quick disconnects like parts # DW05729-1 and # DW05712-1. I also recommend using Butt Connectors # DW05744-5 to splice into your reverse light circuit. Please note that this light bar was not...
  view full answer...


• Will the Curt Q25 With the 16017 Leg Kit Fit the Under-Bed Kit # RP30073 for a 2009 Ford F-250
• The Curt Q24 # C16545-16017 is compatible with the newer Ford OEM puck packages. Since the (discontinued) Under-Bed Rail and Installation Kit RP30073 that fits your 2009 Ford F-250 has the pucks in the same location, the Curt hitch is compatible with this under-bed kit. Please note that the under-bed kit is rated for 18,000 lbs. Even though the Q24 is rated for 24,000 lbs you are limited to your lowest rated component. It is best to always check your owner's manual to ensure you don't...
  view full answer...


• Troubleshooting Bolts on Bottom of 5th Airborne Coupler Too Long
• It sounds like you're talking about the guide bolts on the bottom of the 5th Airborne Premium Fifth Wheel Air Ride Coupler. As long as they are tight in the air bag itself that is normal. They are designed to be free moving in the bottom plate and guide the bag. As long as these bolts are tight within the bag itself, and the top mounting bolts are secure holding it in place, you won't have an issue.
  view full answer...


• Rear Wheel Center Cap For a 2022 Tiffin Allegro Bus 45OPP
• While I cannot lookup exactly what your 2022 Tiffin Allegro Bus 45OPP came with, based on videos and images I could find it appears you have the Phoenix USA Rear Wheel Center Cap # PXPH1764 used with your aluminum 22.5" wheels. You can verify this by measuring your current cap as ours is 9-3/16" diameter by 9-1/4" tall. As far as the center logo you will need to get that from Tiffin.
  view full answer...


• Replacement Solenoid for LP8500 Superwinch Winch
• Hey Steve! Yes, the Replacement Solenoid for Superwinch LP Series Winches # SW90-12877 is what you need for your LP8500 winch.
  view full answer...


• Purpose of Blue Furnace Wires On Replacement Single Zone Thermostat for Dometic RV Air Conditioners
• The two blue wires for the # DMC79FR control box wiring are signal wires. They complete the circuit at the furnace control board when the furnace should be running.
  view full answer...