I have a solution for you, but the trailer wiring harness part # 118404 is for older models of the Dodge Charger than your 2012 model so I cannot recommend it for you.
Instead you would want the part # 118560 as it has been confirmed as a fit for your vehicle and would work well.
I attached an install video that shows it being installed on a 2012 Charger just like yours. view full answer...
The trailer hitch I recommend for your 2016 Dodge Charger is the Draw-Tite Trailer Hitch Receiver, Class II # 36548. This trailer hitch has a 1-1/4 inch receiver that will work well with your Thule Vertex.
The # 36548 hitch has been confirmed to fit all models of the 2016 Charger so it will work well for your Charger R/T Scat Pack. The maximum tongue weight capacity of this hitch is 300 pounds, so your 100 pound bike rack plus bikes will fall well within the hitch's capacity.
I really... view full answer...
We checked with Curt and they state that their Class II hitch part # C12064 is a fit for all models of the 2015 Dodge Charger including your SRT model so we can also guarantee it as a fit.
For a ball mount with a 1-7/8 inch ball you would need part # C45561 or a 2 inch ball part # C45562.
For trailer wiring you would need the part # C56234. view full answer...
Yes, we have trailer hitches that fit your 2016 Dodge Charger SXT. The Draw Tite hitch part # 76145 would be a great option confirmed as a fit. For trailer wiring you'd then want the part # 118655 which is a confirmed custom fit.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball,... view full answer...
My personal favorite is the Thule OutWay 2-Bike Rack, # TH45JV or # TH56BV for the 3-bike. This bike rack uses only 2 rubber coated straps to attach the rack firmly to your vehicle's trunk or rear hatch. This makes installing and removing the rack super easy, the easiest that I have seen. The rack is lockable and the rack also includes an integrated cable lock to deter bike theft. This is by far my favorite rack.
As for protecting your car, here are a few tips that can considerably... view full answer...
The first thing you are going to need is a roof rack that has crossbars that run from left to right. For that I would recommend you get the Rhino-Rack roof rack # RRVA126B-2, # RRRLKVA with clamp kit # DK298.
The Inno Gravity Ski and Snowboard Carrier # INA951 that you referenced is designed to fit square bars that have a range of 24-30 inches apart so the carrier will be compatible with this roof rack.
This carrier can also carry up to 6 pairs of skis so it should have plenty of ski... view full answer...
Yes, the Thule Kayak Carrier part # TH830 is a confirmed fit for square bars like the Sportrack roof rack part # SR1002.
This rack is a semi custom rack that is confirmed as a fit for your 2009 Dodge Charger, but if you wanted a rack that's custom fit for your vehicle and will fit better the Rhino Rack part numbers # RRVA126B-2, # RRRLKVA and # DK077 would be your best option. view full answer...
A 2008 Dodge Charger is going to need a chain setup that offers more clearance than the style of the part # TC1110 which by the way does not fit your tire size. I checked the owners manual of your vehicle and it states that only Class S compatible tire chains can be used with your vehicle.
Which the best option for clearance would be the K-Summits part # TH02230K66 which install easily and require little to no clearance at all.
I also attached a link below to a page that has all of the... view full answer...
You can tow with your 2007 Dodge Charger SXT, and according to the owner's manual I looked up online you can tow up to 2,000 lbs. I highly recommend checking your copy of the owner's manual to verify the capacities so you can safely tow with your Charger.
In order to do so you will need a number of parts, which I'll list out for you in order to make it easy to order:
- Draw-Tite Trailer Hitch Receiver # 36548
- T-One Vehicle Wiring Harness # 118404
- Draw-Tite Drawbar # 36061
- 2"... view full answer...
I called my contact at Curt and asked about the Trailer Hitch Receiver, part # C12064. They said they could not guarantee it would fit your Hellcat. It is a Class ll hitch and has a 1-1/4 inch receiver opening.
I also called Draw-Tite and asked about the fit of the # 36548 Class ll hitch. They said this hitch will work with your Charger Hellcat. This hitch has a 1-1/4 inch opening.
If you are going to tow with the hitch I recommend part # 36061 for a drawbar. This has a 3-1/8 inch rise... view full answer...
The Curt trailer hitch part # C13093 that you referenced has been confirmed to fit all models of the 2013 Dodge Charger so it would work well on your SRT8 model. Check out the install video I attached as well. view full answer...
Yes, I checked with Saris and the Bones bike rack part # SA801BL has been confirmed as a fit for your 2008 Dodge Charger RT.
The arced arms of the rack will fit over the spoiler of your vehicle.
If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and Alternative Frame Bike Adapter # 64005 to provide a horizontal top tube on your bikes to provide an attachment point. I attached a... view full answer...
The lightest 2 bike rack we offer is the # TH9042PRO. This is a quality bike rack that weighs just under 20 lbs. Yes, you read that correctly. Because of its light weight, the rack will be very easy to install and remove. It offers tool free installation and is one of my favorites to use. It also includes locks to secure the bikes to the rack and the rack to the vehicle. I'll include a link to the demo video for you to have a look at. view full answer...
The closer you can get the hitch ball height to the level height of the trailer (tow dolly in your case), the better. Towing the trailer nose up or down can cause trailer sway, which you'll want to avoid. For best results, you'll want to get the coupler and ball height within 1-1/2 to 2 inches, and it's better to have the coupler slightly lower than the trailer ball than vice versa.
A ball mount with a 7-inch rise like # C45338 would put you right where you need to be, height wise. If... view full answer...
The bike rack you referenced, the Hollywood Racks Trail Rider part # HR200Z is exactly what i would recommend for your 2008 Dodge Charger to carry two bikes safely while not having to worry about the bikes hitting each other. This rack won't allow any movement of the bikes so they won't hit each other and also this is one of the more stable bike racks in this price range so it's a really great value as well.
For a hitch you'd need the Draw Tite part # 36548 and you'd have be set with a... view full answer...
For your 2006 Dodge Charger with rear spoiler I recommend the Thule OutWay Trunk Bike Rack # TH45JV. It was designed to work on vehicles that have spoilers. I have linked a video review of this rack for you. This is, by far, the easiest rack to install and it comes with one-keyed locks for both the rack and your bikes to deter theft. Check out the video of this rack.
If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike... view full answer...
I checked with Thule and the Thule Gateway Pro # TH45JV that you referenced has been confirmed as a fit for you 2010 Dodge Charger SXT that has a factory spoiler so it would work well for you.
I attached a review video for this rack for you to check out as well.
If you plan on carrying any women's or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and Alternative Frame Bike Adapter # 64005 to provide a horizontal... view full answer...
The Hollywood Racks Over-The-Top, # HRF2 would work great on your Charger. It has a long reach as well as arms/legs that can move independently of each other for the best fit. This is the carrier recommended by Hollywood Racks for vehicles that have spoilers, including your Charger.
If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike would) then I recommend using bike adapter bar # 64005. This will allow you to carry... view full answer...
We have both Class II and III trailer hitches available for your 2011 Dodge Charger R/T. If you are going to use Class III hitch # C13093 then I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. If you also need a 2-5/16 inch use # 63847. For trailer wiring use # 118560.
If you are using a Class II trailer hitch, like Curt Class II hitch # C12064 or Draw-Tite hitch # 36548, you can use ball mount # C45520.
For... view full answer...
For your 2013 Dodge Charger with a spoiler the Hollywood Racks Expedition part # HRF6-2 is a great option. This trunk rack is confirmed as a fit for your vehicle and is specifically designed for vehicles with spoilers like yours so it will fit over and clear the spoiler well.
We had the chance to install this rack on a 2012 Charger similar to yours and we found it fit and worked well. See the link I attached to see the test fit.
If you plan on carrying any womens or alternative framed... view full answer...
Go To Results