We have not performed a test fit of the CIPA UTV mirror # CMM37, on a 2012 Arctic Cat 550 GT yet. To determine fit, you will need to measure the diameter of the tubing you want to attach the mirror to. If it is 1-3/4 to 2 inches in diameter then it will fit. I have included a link to the installation instructions for you. view full answer...
I think the adaption can be made for the CIPA UTV Adjustable Side Mirror - Black - Left Hand, # CMM37 and the right hand # CMM38 to fit your 1 inch bars, but that would take some shimming. The 1-3/4 inch round clamp would need a shim that will grip as well as allow pressure for a tight fit.
Another option would be to use the CIPA Handlebar Grip Mount ATV Mirror, # CM-11126 on the top front rail to adjust for that side view mirror adjustment. view full answer...
Yes, Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps - 1,400-lbs # MR54FR will fit your 2019 Honda Ridgeline. It simply attaches to your 2" trailer hitch receiver and allows for safe loading of an ATV, UTV/side by side, or golf cart. The max wheel base is 88", the max width is 60", and the weight capacity is 1,400lbs. I attached a demonstration video for you to check out. view full answer...
My contact at Airaid checked the air filters specified for your 2007 Honda TRX680 4-Wheeler and based on his research a better filter option for your ATV is their # AR700-493. This filter has a 3-inch flange to mate with your intake, a base diameter of 6-inches, a top diameter of 4-5/8-inches and a height of 6-inches. If these dimensions match your current filter then this one should be a good fit.
Since these filters are NOT vehicle-specific you'll need to check the measurements of your... view full answer...
To choose the correct battery for your 3,500 lb UTV winch you need to see what the cold crank amps rating is for your winch and then make sure the battery is rated that high. For example, the 3,500 lb Bulldog Winch Powersports Series ATV Winch # BDW15013 is rated for 650 CCA (cold crank amps) so your battery needs to be rated for at least 650 CCA. view full answer...
Yes the etrailer ATV Winch - Synthetic Rope - Hawse Fairlead - 5,000 lbs # e98989 will work on a 2018 Polaris Sportsman. It includes mounting plate and hardware.
It has a hand held operator switch.
This unit is great for 500cc - 850cc UTVs, ROVs, or MOHUVs. view full answer...
Bulldog Winch confirms that the Custom-Fit UTV Winch Mount, # BDW15182, will fit your 2017 Polaris RZR 900S.
Also, the Superwinch Terra Series ATV Winch, # SW1145220, is confirmed to fit the winch mount. view full answer...
Yes, the Classic Accessories Quick-Fit UTV Bench Seat Cover - Polaris Ranger 800/900 - Camo, part # CA181420, will fit your 2021 Polaris Ranger 570 EFI without any issue.
I have included a video review link below. view full answer...
The CIPA ATV Handlebar Mirror - Black Item # CM11132 is a universal handlebar mirror and is compatible with your 1999 Kawasaki Prairie 400 ATV. view full answer...
To answer your first questions, the shipping weight of ATV Cabin Enclosure 052963763072 is 27.5 pounds. As far as I know, the manufacturer sticks to the basic colors of black and camo. Unfortunately, we do not offer mirrors specifically made for ATVs. We do offer Adjustable Side mirrors, part # CMM37, and # CMM38 that may work for you. I am not sure what application you are already working with, but I thought this mirror might help you out. If you could attach mirrors to the ends of the... view full answer...
If the roll bar diameter on your 2010 Polaris Ranger cab measures 1-3/4 inches to 2 inches, then you will be able to use the CIPA UTV mirrors, # CMM37 and # CMM38. view full answer...
The Erickson ATV E-Track Tie-Down Kit part # EM09160 has a 1,500 lb weight capacity as a whole. It's not made for vehicles if that's what you were wondering but rather ATVs and UTVs. If you need to secure a vehicle I instead recommend using the Erickson Adjustable Wheel Net part # 77314 which has a capacity of 1,166 lbs per wheel net and attaches to the same e-track system as the above. view full answer...
Yes, I looked at the parts from the warehouse and confirmed that the Bulldog Winch Powersports Series UTV Winch # BDW15023 has a mounting bolt hole pattern that is compatible with the Bulldog Winch ATV Winch Mounting Plate for 2" Hitches # BDW20061R2. view full answer...
The CIPA UTV Adjustable Side Mirror part # CMM37 for left or part # CMM38 for right are designed to mount on a roll bar up to 2" diameter. I wasn't able to find any larger clamps specifically for these mirrors nor could I find any mirrors designed for a larger roll bar but the design of the clamp is pretty standard, it actually just looks like a wire loom clamp so I'm sure you could find one big enough for your roll bar and retrofit it to the mirrors. view full answer...
I'm not certain what you mean by 'feedback', but the CIPA # CM01139 isn't a vehicle specific item. It will mount to round roll cage tubing that are 1-3/4 inches in diameter. If your roll cage uprights are of that diameter, the mirrors will work great for you.
As you can see from the provided product reviews, this mirror set gets good reviews from our customers. view full answer...
Yes, it is! The Superwinch Terra Series ATV Winch item # SW1145230 comes with a mounting bracket and screws for installation but you'll have to drill some holes most likely. For a custom fit bracket to install this winch on your 2018 Polaris Ranger XP900 you will want the Bulldog Winch Custom-Fit Steel ATV Winch Mount item # BDW15174. view full answer...
My recommendation is that you could consider using the CIPA Handlebar Grip Mount ATV Mirror # CM-11126. This style wraps around the handlebar using a Velcro strap, and can accommodate handlebars up to 1-1/4 in diameter. Please measure your existing handlebars and make sure that with the additional diameter of your installed heated grips that this option would work for your ATV.
If this mirror is compatible with your ATV, please be advised that when you use the Velcro strap to mount the... view full answer...
Yes, you can use the Erickson Mini E-Track Plate # EM09134 with E-Track ratchet straps such as the CargoSmart Ratchet Straps for E-Track - 1" x 6' - 500 lbs # 3481717 or Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs # EM58523, though you would not be able to use wheel chocks.
I went out and test fit the plate with the Erickson E-Chock Wheel Chocks # EM09162-2 and found they would not fit. So if you were okay with not using wheel chocks - for... view full answer...
Yes, the CIPA ATV Handlebar Mirror # CM11132 that you referenced will fit your 2006 Honda Rincon ATV as it is designed to fit the standard ATV bar end diameter like what yours has. I attached a review video for this for you to check out as well. view full answer...
Yes, both the Bulldog Winch # BDW78FR and the SnowBear Winch # SB263-282 will use the same mounting plate, with the holes being 3-1/8" apart on center.
We do not have a way to automatically notify you when parts are in stock. If you are in need of a Replacement Strap # SB263-323, your best bet would be to go ahead and order one as soon as possible. That way you will be able to hold a spot on our waiting list. view full answer...