Mirror that Fits Handlebar Ends of 2006 Honda Rincon

Question

Question:

will this mirrow on my Rincon 2006 atv

asked by: RUSELL F

0

Expert Reply:

Yes, the CIPA ATV Handlebar Mirror # CM11132 that you referenced will fit your 2006 Honda Rincon ATV as it is designed to fit the standard ATV bar end diameter like what yours has. I attached a review video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The fit of the CIPA ATV Handlebar Mirror part #CM11132 is designed to fit a handle bar with an interior diameter of 5/8" up to 3/4". It is placed inside the open handle bar tube and expands with a torsion screw to secure it. Another option…

view full answer...

Answer 2

Good news, I can help you figure out how this mirror mounts and if it will fit on your Yamaha Grizzly. This mirror mounts by inserting it into the exposed end of the handlebar. With the help of the hex wrench tool the pieces will expand to fit within…

view full answer...

Answer 3

Thanks for reaching out, Scott! The Blue Ox Base Plate Kit #BLU74FR on our site is actually the same thing as the Blue Ox part number BX2418 and I like that removable pin style much more than the etrailer Classic Base Plate Kit #e98945 with the fixed…

view full answer...

Answer 4

The L-brackets of the Reese weight distribution system #RE44FR need to install between 24.5 and 27.5 inches from the hitch ball center. I attached a picture that I took from the instructions that shows this. The range gives you a bit of flexibility…

view full answer...

Answer 5

Hey there Stormy, I think we can figure this out, as there are a quite a few options. First, let's just discount the heavy-duty rack, as those are just oddly shaped crossbars and there's nothing HD about them (like you mentioned, they have…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

There are a few different ReCurve R3 weight rating options available so I don't know exactly what system you have and if it's properly rated for your trailer with just that info. Your old trailer was rated to weigh up to 4,400 lbs and your…

view full answer...

Answer 8

I confirmed with my contact at Curt that the spring bars of the Curt Trunnion Weight Distribution System part #17302 is 30-5/8 inches. You are also correct about the Curt Short-Arm Systems as they have 28-5/8 inch length spring bars. I attached an…

view full answer...

Answer 9

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

view full answer...

Answer 10

The correct Blue Ox base plate for your 2019 Ram 1500 Laramie Longhorn is going to be determined by which truck you have. 2019 was a split model year for the Ram 1500 where they produced two very different models. The 1500 Classic which is…

view full answer...

Answer 11

I would be happy to recommend a ball mount for your Ram 1500 4WD with air bags installed, but the correct ball mount is really going to come down to how much of a rise/drop you need to tow your trailer level. To determine the rise/drop you need you…

view full answer...

Answer 12

This will depend on the hitch used and the height of the trailer coupler. You want the trailer to be as level as possible. We have a page on calculating hitch height and coupler height to help you find what ball mount would work best. Most light duty…

view full answer...

Mirror that Fits Handlebar Ends of 2006 Honda Rincon

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching