Yes. If the latch on your Curt Pop-In Ball for Ram or Ford OEM Gooseneck Hitches # C60601 has been damaged in use then I do recommend replacing it to avoid any potential issues in the future that might keep you from removing the ball from the truck altogether. view full answer...
I was not able to find anything under part number S2075. Perhaps you meant S2875 which are the running boards included with Aries Oval Nerf Bars w/ Custom Installation Kit - 6" Wide -Stainless Steel - 75" Long # AA4444004; these fit your 1994 Chevy C1500 extended cab. If you just need the mounting brackets for this kit then you will want to go with Custom Installation Kit for Aries 6" Oval Nerf Bars - Black Powder Coated Steel # AA4491.
If you are sure that your running boards have part... view full answer...
The bolt you are referring to on the # 24914 Draw-Tite Sportframe Trailer Hitch is the hex bolt. This is a M12-1.25 x 30 mm Class 8.8 hex bolt.
I have attached an installation video as well as the installation details which lists all of the parts for your reference. view full answer...
It sounds like you have the # 56-140652 Westin HDX Nerf Bars with Drop Steps for your 2021 Jeep Wrangler Rubicon. The correct replacement mounting hardware for these nerf bars is # WE86FR Replacement Mounting Hardware Kit for Westin HDX Nerf Bars with Drop Steps.
I have attached a video review of the nerf bars for your reference. view full answer...
The correct replacement for the Landing Gear Motor 1RV-200 is the Lippert Venture 5th Wheel RV Landing Gear Motor part # LC142178. The correct replacement gearbox for this motor is the Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies part # LC276602. view full answer...
The Mopar roof racks are made by Thule, so their replacement keys will work, though you mentioned E0S7; would this be 057 by chance? If so, there is a replacement key you can use:
- Replacement Key for Thule Racks and Carriers # THKEYN057
If it does happen to be the letter "S" instead of the number "5" then we wouldn't have a replacement key available. view full answer...
From what I could find out about your current circuit board, the Atwood Replacement Control Panel # AT91367 will be a direct replacement. view full answer...
As it looks like you have a Titan model 60 actuator, we definitely have replacements for you.
If you wanted to replace the whole actuator, the Titan Zinc-Plated Brake Actuator w/ Electric Lockout - Disc - Multi-Fit Ball - Bolt On - 6,000 lbs # T4745720 will be a direct bolt on replacement. However, if you just wanted to replacement master cylinder and shock, you will need the # T4820000 and # T2336200.
For the actual brakes, you have 2 options. If you wanted replace the whole caliper,... view full answer...
If you are looking for an over the range microwave we do not have a RV microwave that is 21" wide. If you are looking for a built in microwave the closest we have is the Furrion Standard RV Microwave # FMSN09BL which is going to be 19-1/16" wide. The other measurments are 14-1/16" deep and 13-5/8" tall. view full answer...
The Atwood you referenced is no longer available and there is no direct replacement currently available for your Atwood G6A-8E. I recommend the Dometic RV Water Heater - Gas and Electric - Automatic Pilot - 120 Volt - 10,000 Btu - 6 Gal Tank Item # DMC74FR. It is very similar to what you had. The Double-Panel On/Off Switch # AT91230 will allow you to power the electric and gas components on and off individually. It mounts in your coach for easy operation.
When it comes to Installation... view full answer...
We definitely have replacements for your Ventline 2262-50 motor and fan blade. With that being said, the Replacement 110-Volt AC Fan Motor for Ventline RV Bathroom Insert Fan with 50 CFM Capacity # BCD0388-00 will be a direct replacement. There does seem to be a couple different size fans that may have been used, but it does look like the Replacement Fan Blade for Ventline Bathroom Ceiling Vents - 6-1/2" Blade # BVA0312-00 will be the correct one for you. view full answer...
It sounds like you just need to replace the fresh water inlet on your Newmar Dutch Star. For this I recommend taking a look at the Valterra # A01-0176LFVP. This features a 1/2" FPT inside connection and includes all the needed hardware for installation. It does have the garden hose swivel-type fitting that you can use to connect a hose to your water supply.
I have attached a short video review on this product along with a link that will take you to our complete selection. view full answer...
Finding grease on the brake magnet and around the assembly is definitely a sign that the hub's grease seal needs to be replaced. The people you have talked to are correct. When searching for the right replacement you will need to check for a number that should be stamped right inside the seal itself.
If you can't find a number, you can also use a digital caliper to measure the diameter of the spindle where the grease seal rides (see attached diagram). This will give you the seal's inner... view full answer...
Both the Dometic and Atwood air conditioner units have been used as OEM products over the years. A lot of times when it comes to AC units it boils down to personal preference. The Atwood AC units have made their mark on the industry so if you want to switch from your Dometic AC unit then I am positive you will enjoy the 15,000 Btu Atwood Air Command with the Heat Pump # AT15033-22.
A few key features of this AC unit is that it has low amp draw and a v-flow airstream that blows the air... view full answer...
Although the design details like the ventilation slot pattern may differ from your original, we do have a replacement shroud for the Coleman-Mach branded RV air conditioning units. Based on your part reference 7330-713 you can use the MaxxAir part you referenced in your question, item # MA00-325001.
I linked a photo of this item with dimensions. Note that the dimensions will not exactly match your existing shroud due to both design changes and the effects of age and UV radiation on your... view full answer...
I could not confirm the Lippert 32 Series Double Step Frame # LC3722618 (Lippert part 908032000) as the correct item for your application. My contact at Lippert did not recognize the OEM Frigette coach step that came on your Georgetown and he suggests you install a complete new step to avoid potential compatibility issues.
We have motorhome electric steps in three widths, 24-, 25- and 30-inches. Since most are the 24-inch width I linked products in this size for you. If yours are a different... view full answer...
The Ultra-Fab Spring-Loaded Quick Pins for Landing Gear Drop Legs - 3/8" Diameter - Qty 2 # UF17-943031 is the replacement you are seeking for your landing gear. These spring loaded pins work great to give you easy operation of your drop leg assembly without losing a pin or clip. The Lippert Components Quick Release 5th Wheel Gear Pull Pins - Qty 2 # LC308287 or Stromberg Carlson # LG-119113 are basically the same product from Lippert and have an L-shaped handle versus the T-shaped handle... view full answer...
It sounds like you might have the master cylinder for the Titan Model 6 Brake Actuator, either part # T1777401 for Drum or # T1777405 for Disc. This particular master cylinder features two springs, one on each side, that assist with pulling the bracket and plunger back into position when applying the brakes.
If this does not look like what you have please feel free to email me a picture directly and I will be happy to take a look. You might also try and locate a part number somewhere... view full answer...
Go To Results