The Roadmaster Rollaway Trailer Hitch Protector is a universal fit item. It is designed to fit most 2 x 2 inch Class III and up hitches.
We carry 2 different 2 inch hitches for your 2009 Chrysler Town and Country. They are Draw-Tite part # 75579 and Curt part # 13364. I got one of the Roadmaster RM-050 from the warehouse and tested on those 2 hitches and it fit both.
If you have one of these 2 hitches, it will fit fine. If you do not have one of those hitches, it will probably fit. You... view full answer...
The Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs # MPG113MD will fit great on the OEM crossbars for your 2008 Chrysler Town and Country. You may need to offset them some to be able to fit 2 kayaks laying flat. I recommend taking some measurements and seeing if your kayaks will fit side-to-side.
If they don't then I recommend using the Malone DownLoader Kayak Carrier and TelosXL Load Assist w/ Tie-Downs # MPG114MD-351XL instead. This only comes with 1 set of cradles though... view full answer...
Yes, the Curt Trailer Hitch Receiver # 13364 will still fit a 2010 Chrysler Town and Country even if it has the Stow&Go seats.
We actually had the chance to install this hitch on the exact same style that you're talking about and I've attached an installation video for you to check out.
A lot of people get a hitch installed on a Town and Country to haul smaller trailers. If this is you then you'll also need the wiring kit # 118552 and a ball mount kit like part # 989891 which includes... view full answer...
The etrailer.com Trailer Hitch Receiver # E98854 is compatible with the Stow and Go seating in your 2010 Town and Country. It is a very easy installation and in many cases doesn't require notching the fascia. If your specific vehicle does, this is very easy to do and doesn't impact the overall look. I've attached the installation instructions and a video to assist. view full answer...
You'll need one of the following etrailer trailer hitches for your 2007 Chrysler Town and Country depending on if you have the Stow-N-Go seats or not:
With Stow-N-Go Seats - # e39KR
Without Stow-N-Go Seats - # e43KR
The Stow-N-Go seats take up extra space underneath your van which is why there are different fits.
If you are installing a hitch to use a bike rack then I recommend checking out the Thule Apex Swing XT Bike Rack # TH9027XT which is perfect for families as it gives you space... view full answer...
You can tow your trailers, although please note that it is not possible to verify any type of fit for a trailer hitch on anything but fully stock in the area where the hitch will be installed. I can only offer the trailer hitches and trailer wiring harnesses that fit your 2006 Chrysler Town and Country as if it were stock, which are the following:
- If your van DOES have Stow-N-Go Seats: Draw-Tite Max-Frame Trailer Hitch Receiver # 75305
- If your van does NOTE have Stow-N-Go Seats: Draw-Tite... view full answer...
There is a trailer hitch receiver fit for your 2005 Chrysler Town and Country with Stow-N-Go seats:
- etrailer Trailer Hitch Receiver # e39KR
I verified for you that this is the correct fit for the Stow-N-Go seating on your Town and Country, and does not require any drilling or other modification to install.
The only other thing you may need, if you plan on doing some towing, is a trailer wiring harness. The correct fit for your '05 Town and Country is the T-One Vehicle Wiring Harness... view full answer...
I have another recommendation as our etrailer Trailer Hitch Receiver # e98854 is only rated for up to 400lbs of tongue weight when equipped with a carrier like the Black Widow that you are considering. Currently there are no other receivers available with a higher capacity for a carrier.
I recommend using a Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7. This trailer has a bed that is 88" long and 52" wide which will be able to haul your two bikes that weigh 400lbs. Since the... view full answer...
Yes, The Curt Trailer Hitch Receiver # 13389 will fit your 2006 Chrysler Town and Country LX with the stow n go seating. There is no drilling required for the installation of this hitch on your Chrysler.
You will also want the Hopkins Plug-In Simple Vehicle Wiring Harness # 42235 for connecting your trailer lights, if you plan on doing any towing. This can also come in handy if you are using a bike rack or similar carrier that may block the taillights on your Chrysler. view full answer...
The Highland Semi-Custom Cargo Area Mat you referenced, part # 4401200 measures 54-1/2 inches x 49-1/4 inches and is intended to be trimmed to fit. The mat features molded lines on the back that will help you trim it to fit.
As long as the floor in the cargo area of your Town and Country measures less than 54-1/2 by 49-1/4, the mat will work just fine for you.
If you would prefer a custom-fit mat, you can see our selection of those by clicking the provided link. view full answer...
Draw-Tite trailer hitch # 75579 is listed as a fit for all models of the 2008 Chrysler Town and Country so that would include models that have the Stow n Go seats. I have linked the instructions and a video showing how the hitch installs.
If you plan on doing some towing you might be interested in etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag.
If the ball mount kit does... view full answer...
If you are looking for a box that will not interfere with the rear hatch on your 2010 Chrysler Town and Country then from Thule the best option is the Motion, # TH629706. The Force XL boxes have not been confirmed to fit without interfering with the rear hatch. view full answer...
The best way to determine the correct rise you will be need will be to first install the Curt hitch. Then park your Town and Country van and the trailer on level ground. Measure from the ground to the top of the receiver opening on the trailer hitch. Then, with the trailer level, measure from the ground to the bottom of the coupler.
If the coupler is higher, the difference is the amount of rise you will need. You can then go through our ball mount main page, linked for you, to find the... view full answer...
The Thule Gateway Pro for 2-bikes, part # TH88VR would indeed be a fit for your 2005 and 2006 Town & Countries. The Gateway Pro can handle two 35 lbs/bike. The 3 bike model, part # TH78VR can handle up to 105 lbs, with bikes up to 35 lbs apiece.
If you'll be transporting women's bikes or bikes with sharply-angled top tubes, you might also consider a frame adapter bar like part # 64005. The bar spans the distance between the handlebar gooseneck and the seat post, which provides a secondary... view full answer...
The Yakima HullRaiser to HullRaiser Aero Conversion Kit # Y8860031 will allow your HullRaiser roof-mounted kayak carrier to mount to the factory roof rack crossbars on your 2014 Chrysler Town and Country van. Two kits will be needed for a complete conversion.
If you also need replacement plugs to secure your carrier pads onto the J-cradle bases you can use kit # Y8890058. view full answer...
A hitch from a 2000 Dodge Grand Caravan would not fit a 2012 model so you'd need a new hitch like the etrailer part # e98854 instead. view full answer...
I confirmed with Yakima that the Yakima JayLow J-Style Roof Kayak Carrier # Y04073 will indeed fit onto the factory roof rack on your 2016 Chrysler Town and Country. This carrier fits onto crossbars that are no wider than 3-1/2" and no taller than 1-11/16".
The JayLow has small padded ramps on the side of the carrier to allow for easier loading and unloading of kayaks. Everything necessary for installation and use of this kayak carrier is included, but I do recommend adding Yakima SKS... view full answer...
I have another option for you, but the etrailer # e98864 you mentioned is only confirmed to fit a 2006 - 2018 Toyota RAV4.
For your 2015 Chrysler Town and Country I recommend the Draw-Tite # 75579 instead as it is confirmed to fit your vehicle. This hitch has a 400lb tongue weight rating and a 4000lb trailer weight rating that gets bumped up to 500lb tongue weight and 5000lb trailer weight when using a weight distribution hitch.
If you are planning on towing with your Town and Country... view full answer...
The WeatherTech side window air deflectors, # WT80451, will fit a 2005 to 2007 Chrysler Town and Country. We actually have several different options for window air deflectors for the 2007 Chrysler T and C and I have included a link to the available options for you. view full answer...
Go To Results