For your 2019 Acura RDX the hitch that sticks out the least is the etrailer Class III part # e72AR. Other options stick out around an inch more or so. view full answer...
The Curt hitch # C11085 is a fit for your 2013 Acura TSX Sportwagon and would be a great option to carry a hitch mounted bike rack. As far as a lock for a bike would go that is going to depend largely on the bike rack you pick. Most racks have specific locks that have to be used with them which sometimes are included but sometimes can be purchased separately.
For example the Hollywood Racks Destination part # HLY94FR comes with a hitch lock but if you wanted to upgrade it to a lock setup... view full answer...
Your only solution is going to be to carry the bikes on the roof of your 2013 Acura MDX and then carry a cargo carrier on the hitch at the rear of the vehicle. You can't use a different cargo carrier with the Hollywood Racks setup you mentioned.
If you need a hitch you would want the Draw Tite part # 75614 which is a fit. This would allow you to carry the Curt # C18151 that you mentioned.
For a bike rack confirmed to fit the factory bars of your vehicle the Yakima Frontloader part # Y02103... view full answer...
As far as installing the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75784 on your 2018 Acura RDX, it is not overkill for the purposes of of transporting a 2-bike platform rack. Also, since the # 75784 involves a concealed crosstube design exactly like the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12083, you won't have any bulky eyesores associated with an exposed crosstube. Also, the 2-inch receiver opening has the benefit of being compatible... view full answer...
The owner's manual of your 2011 Acura MDX states that 'A weight distributing hitch is not recommended for use with your vehicle, as an improperly adjusted weight distributing hitch may reduce handling, stability, and braking performance.'
Given that, I'd use a different method of reducing the rear end sag. Air helper springs such as # AL60815 can be pressurized up to 35 psi when towing to add additional support to the rear suspension, and aired down to a minimum of 5 psi when not towing.... view full answer...
Personally, I like the SlientACT # SHP2082 because it does thread in but then you use the cam lever to quickly tighten or loosen it. I have linked a video review of it for you.
Or another option I think you will like is the Pro Series lock and anti-rattle device # PS63100. This one uses a longer block so that it cannot turn when inside of the shank rather than relying on a spring for retention. I have linked a video of this one as well.
For either of these options I recommend used Loctite... view full answer...
The Kuat Sherpa Bike Rack # SH22G was designed to be used with the 1/2 inch hitch pin that comes with it. But we have found that the etrailer Locking Hitch Pin part # e98882 that has a 5/8 inch diameter does work. view full answer...
It sounds like your MDX doesn't have the factory tow package, if the 7-way controller isn't mounted to the back of the vehicle. The good news is that I can help you outfit your 2007 Acura MDX for a 7-way and brake controller.
Since the vehicle isn't already prewired for a 7-way, you will need to hardwire the vehicle. You will not need the adapter because the brake controller will include a universal harness.
To equip your vehicle with a 7-way you will need the 4-way # 118424 and the... view full answer...
Because the support strap you speak of would loop over the spoiler, there is a possibility that the weight applied to the strap could break the spoiler. Curt makes a great hitch, but I can't recommend them for every application because some vehicles aren't suited to using the strap (especially vehicles like your RDX that have the spoiler atop the hatch lid).
I'd recommend the Draw-Tite Class III hitch, part # 75784. Unlike the Curt hitch, Draw-Tite doesn't have a warranty stipulation... view full answer...
The roof rack I recommend for your 2017 RDX is the Yakima Jetstream roof rack. This roof rack uses Black aerodynamic aluminum crossbars that are designed to dramatically reduce wind noise and vibration, and also reduce drag so it helps with fuel efficiency. This roof rack has a 165-lb weight capacity so 4 sets of skis will be no problem. Installing this roof rack will not affect the warranty of your Acura. For this roof rack you will need to order:
part # Y00426
part # Y28TR
part # Y06148
part... view full answer...
For your 2008 Acura RDX, we have the 1-1/4" Curt Hitch # 13536 that is confirmed to fit . Also, Curt requires the use of a stabilization strap, like part # 18050, when carrying any non-trailer loads such as a bike rack or cargo carrier.
If you choose to tow a trailer, you will want to get a ball mount like Curt Class II Drawbar # C45503, but you will want to make sure you have the right rise or drop on your ball mount to tow a trailer level. You will also want a hitch ball in either... view full answer...
I have a different weight distribution hitch recommendation for your 350-500lb tongue weight range, but the lowest rated Curt TruTrack Weight Distribution Hitch is rated for 500-800lbs tongue weight so it will be a bit stiff for your camper.
Instead I recommend going with the Fastway e2 Weight Distribution Hitch # FA92-00-0600 which works with tongue weights between 250-600lbs so it would be the perfect option for your specific trailer. This hitch has built in two point sway control to... view full answer...
For the Class I hitches like the Curt # C11455 that fits your 2005 Acura TSX you have to use only the recommended ball mount in the recommended rise/drop position. For your situation the recommended ball mount is the part # C45521 which you'd need to run in the rise position. This provides a rise of 2-5/8 inches.
For hitch balls you'd then want the part # A-82 for a 2 inch ball or part # A-80 for a 1-7/8 inch ball. view full answer...
For your 2005 Acura MDX there isn't a factory brake controller port under the dash. You are going to have to hardwire your brake controller to your 7-way to make it functional.
Since you have a 7-Way you will only need a few more components to complete a brake controller install on your vehicle.
For a wiring kit to install the brake controller and the 7-way adapter you would want the Wiring Kit For 2 and 4 Brake Electric Brake Controllers # 5506. This will provide the power source and... view full answer...
I may have another option for you, but while this has not been tested with the Stromberg Carlson Cargo Carrier # CC-100installed on your 2020 Acura MDX the bikes on either the Saris Bones # SA805BL or Yakima Fullback # Y02634 will likely contact the carrier or make it where you would not be able to utilize much if any space on the carrier.
A better option is to use a roof mounted bike rack which will not interfere with the cargo carrier. A great option is the SeaSucker Mini Bomber Roof... view full answer...
We do carry roof racks for your 2016 Acura ILX. I attached a link to a page that has all of them listed for you to check out, but the most popular option that I would recommend for you is the Thule Aeroblade Roof Rack part numbers # TH711420, # TH710501, and # TH145180. The bars of the rack were designed to be as quiet as possible and give you the best fuel mileage.
For a kayak carrier the Yakima JayLow part number # Y04073 would be a great option as well. This J-style rack can also fold... view full answer...
The best solution for a non-hitch mounted bike rack in this case is going to be the rack you were looking at- the Yakima FullBack # Y02633, which will attach to the rear of your vehicle and allow you to carry up to 3 bikes weighing up to 90-lbs total (35-lbs each when less than 3 bikes). The adjustable arms really help out at keeping the bikes clear from bottoming out during transit and I really like that this rack includes a cable lock to keep your bikes secured.
If you're going to be... view full answer...
For your 2020 Acura MDX, I recommend starting with the trailer hitch receiver # e98840 if you don't already have it. Then for your street bikes, I recommend the RockyMounts MonoRail 2 Bike Platform Rack - 1-1/4" Hitches - Tilting - Wheel Mount # RKY10003 which will hold both the wheels and frames in place for secure transport. It includes locks so your bikes will be secure. I have attached a video of this installation to assist. view full answer...
For a j-style kayak carrier that is compatible with the Seasucker Monkey Bars # 298-SX6000B, I recommend the Swagman Contour Kayak Carrier w/ Tie-Downs - J-Style - Fixed Arms # S65148. The Contour comes with 2 tie-down straps as well as 2 bow/stern anchor ropes with vinyl-coated S-hooks.
If you want a kayak carrier that folds down when not in use, I recommend the SportRack Kayak Carrier with Tie-Downs - J-Style - Folding - Roof Mount # SR5513. The SportRack Kayak carrier comes with swing... view full answer...
Go To Results