To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These 1,000-lb capacity truck bed rail tie down anchors stay out of sight and out of the way when you don't need them and snap up when you want to haul. They give tie downs a better angle of pull than factory anchors and are easier to reach.
Features:
Specs:
Whether you have open stake pockets or pop-out rail caps, it only takes a few seconds to install these BullRing anchors. All you have to do is pop the caps off using a flat head screwdriver, insert the anchors into the stake pockets, and tighten them down with a Phillips head screwdriver.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. And today we're gonna take a look at these bull ring, flush fit, retractable tie down anchors for truck beds stake pockets. These heavy duty anchors are going to attach to your truck bed stake pockets and provide tie-down points to secure your load, working with your S hook and J hook connections. Now, these are custom fit anchors that are designed to fit the 2015 and newer, Ford F-150 Regular Cab, Super Cab and Super Crew Cab. The 2017 rather, to 2020 Ford F-250, F-350 Super Duty Crew Cab With Full Rear Bench Seat. Then the 2017 and newer Ford F-250, F-350 Super Duty Crew Cab With Full Rear 60-40 Split Bench Seat.
And then finally, the 2017 and newer Ford F-250, F-350 Super Duty Regular Cab or Super Cab. to confirm if these are going to fit your particular truck, take advantage of our vehicle fit guide here at etrailer.com and input the year make and model of your truck. And our fit guide will let you know if these will work for you, or if we have something comparable that will work for you. Now, while the factory anchor points are inside the bed of your truck, where it can be hard to reach, these retractable anchor points, install into the stake pockets on top of your bed rails. And these are gonna be very easy to use.
You're just going to simply pop up this anchor ring, like so, and then you hear that click and that anchor ring is locked into place, it's secure, it's not going to accidentally slide down. And so it's going to be immediately ready for you to use it, to secure your load, again, then use it with those S hook or J hook connectors. And then when you do not need these anymore, you're just going to firmly push it down. And then you're going to have a nice flush surface on your bed rail. And these are gonna be, the rings are gonna be completely out of the way.
So again, very easy to pull up. You just pull up firmly. It locks into place, and then when you're done, push it down and it's out of the way. The flush fit is compatible with most tunnel covers and these anchors have a weight capacity of 1000 pounds. They are constructed of stainless steel that's going to resist rust and corrosion and the nylon lower body is going to reduce sound.
And these are going to match the grain and color of your Ford bed rails, giving you that really nice factory look. Now, installation is going to be very quick, very simple and easy. It really requires nothing more than a Phillips head screwdriver. And to install these, you're gonna begin by removing the Ford pop out stake pocket, cover on your bed rails. And then you're going to use a Phillips screwdriver to loosen and remove the two screws in the anchor. And I went ahead before our time together here and just loosened these screws. And so I'm gonna go ahead and remove them here. And when you loosen and remove the screws, that's going to allow this steel plate to drop down and you're not gonna have to worry about losing this plate in your stake pocket, because it is permanently attached to this ring. So you can just simply let that drop and let that hang. And then while you're holding this top black cover, you're just going to guide the anchor into the hole from the side of your bed and then you're going to then pull up on the cover, catching the lower bracket on your truck's sheet metal. And then you're going to hold the ring and allow the cover to drop into place. And then you're just going to insert the screws and tighten them up. And that's gonna be how, that's gonna be how easy this installation is going to be. When you are tightening the screws, you simply need to hand tighten them. You do not wanna over tighten them. And these are going to be once they're installed, they're gonna be very simple to use, very convenient to use and I'm really impressed with just how simple they are to use and the flexibility that they offer you. And when you're not needing them, you're not gonna have those rings sticking out. So this is really a great solution if you're looking to provide those anchor points, those easy to access anchor points on your bed rails in your truck. Now these do have a lifetime warranty and you will receive six of these. However, if you don't need six and you're looking for different quantities, I'm happy to report that we do also have these in a set of four and a set of two and I am including our item numbers on your screen for those different sets. And you can just take that item number that you're interested in, put in the search field of our website here at etrailer.com. And it'll take you to the set that you are wanting to check out. And then one other thing that I want to mention, certain trucks have stake pockets in the front or middle near the window that are offset from the plastic rail cap. If you have this on your truck, then you are going to need those stake pockets that I have there at the bottom of your screen, showing you the sets that you are going to need if you have offset stake pockets. So again, these are gonna be a great solution for you, if you are looking for a simple solution to add some anchor points to the bed rails of your truck and that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Do you have a question about this Truck Bed Tie Down?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.