BullRing Stake Pocket D-Rings - Retractable - Flush Mount - Qty 2

Video Transcript for Review of BullRing Truck Bed Tie Downs - Flush Fit Retractable Anchors For Stake Pocket - BU24FR

Hi everybody, Andy here with etrailer.com. And today we're gonna take a look at these BullRing Flush-Fit Retractable Tie-Down Anchors for your truck bed stake pockets. These heavy-duty anchors are going to attach to your truck bed stake pockets, and provide tie-down points to secure your load. Working with S-hook and J-hook connections. Now, these are our custom-fit anchors that are designed to fit the 2015 and newer Ford F-150 Regular Cab, SuperCab, and SuperCrew Cab. And then the 2017 and newer, Ford F-150 Raptor SuperCrew Cab.

To confirm that these are going to work for your vehicle, take advantage of our vehicle Fit Guide here at etrailer.com, and input the year, make, and model of your truck. And our Fit Guide will let you know if these will work for you, or if we have something comparable that will work for you. Now, while the factory anchor points are inside the bed of your truck, where it can be hard to reach, these retractable anchor points are going to install in the stake pockets on top of your bed rails. Simply pop the anchor ring up when you want to use it to secure a load, and then push it down firmly, so it can become flush and out of the way when you don't need it. As you can see, these are gonna be very easy to use once you have these installed.

So when you need a ring to secure your load, you just pull up firmly. You'll hear that click, and that ring is going to be secured in place. It's not going to accidentally slide down, and that's going to be up and available for however long that you need it. And then when you don't need it anymore, push it down firmly, and it is flush and out of your way. So very easy to use.

That flush fit is compatible with most tunnel covers. And these anchors have a weight capacity of 1,000 pounds. They're constructed of stainless steel. So that's going to resist rust and corrosion, and the nylon lower body is going to reduce sound. The top cover here is going to match the grain and color of your Ford bed rails, giving you that nice factory look.

Now, not only are using these very easy, and very simple, and convenient, but installation is going to be very quick and easy as well. And really, it requires nothing more than a Phillips head screwdriver. So what you wanna do when you are ready to install these, is first remove the Ford pop-out stake pocket cover, and then you're going to use a Phillips head screwdriver to loosen the two screws in the anchor so that the steel plate can drop down. So I went ahead and loosen these before our time together here, and then just remove them, grab hold of this top plastic cover here. And that's going to allow this steel plate to drop down. You're not gonna have to worry about losing this steel plate in your stake pocket because it is permanently attached to this ring. So just let it hang down there. And then while you're holding this top cover, you're just going to guide the anchor into the hole from the side of the bed, and then pull up on the cover, catching the lower bracket on the trucked sheet metal. And then you're gonna simply hold the ring, and allow that cover to drop into place, and then insert the screws here. And once you have them inserted, then you're going to begin tightening them again with that screwdriver. And all you have to do is hand-tighten them. You wanna make sure that you don't wanna over-tighten them, and that's going to be it for the installation process. Now these do have a lifetime warranty, and again, I'm very impressed with the build quality, with the simplicity of use, and really, the simplicity of installing them as well. So I think this is gonna be a great solution for you to consider if you're looking to quickly add some tie-down anchor points for the stake pockets on your truck bed. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..