To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This marine-grade truck-bed mat is the embodiment of tough: waterproof, resistant to rips and stains, and made to last. It's easy to install, and the snap-on, snap-off design is perfect for quick removal and reinstallation on your Toyota Tacoma.
Features:
Specs:
Thick enough to prevent big loads from leaving nasty scratches and dents but light enough to remove and reinstall with ease, the Access truck-bed mat offers your vehicle's bed the ultimate in protection and convenience.
Whether you're at work or at play, this 1/2-inch-thick, marine-grade bed mat is perfect for keeping your payload from sliding or shifting while you are traversing rugged terrain. The mat snaps into place in your truck bed, so it won't slide as you're loading and unloading cargo. Made of high-quality, waterproof polyester that is constructed entirely from recycled plastics, it resists stains, rips and mildew. This mat is built to stand up to the wear and tear of heavy-duty loads and brutal weather.
While a particularly vital feature, durability is not all that the Access truck-bed mat has to offer. With its lightweight construction and convenient snap-on, snap-off design, it is also super easy to maintain. After a long day of hard work or rough play, all you have to do is pop the mat right out of your bed and then hose off, sweep, or powerwash away the dirt and grime. This ensures a clean-looking truck bed no matter how much you put it through.
Your Access truck-bed mat can be installed with a drill or without, according to your preference. The included drill-in snaps require that you drill six small holes in your truck bed. Then attach a male snap to each hole with a screw and simply snap on your bed mat. Alternatively, you can opt for a drill-free installation using the set of adhesive snaps included in this kit. With the adhesive snaps, you fix six peel-and-stick male snaps to your bed and then snap on your truck-bed mat. Both options work with bare beds or beds with drop-in or spray-on liners. However, it is recommended that you use the drill-in installation kit if you have a drop-in liner.
The Access truck-bed mat is easy on the knees, easy to install, easy to maintain, and durable enough to stand up to almost any activity. It's the perfect mat for protecting your bed from damage that may occur when you are hauling loads for a big job, taking the essentials to the lake, or tailgating at the next big game. If you're looking for high-quality protection and convenience, this mat is for you.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi Matt with etrailer. If you have a 2015 Toyota Tacoma and you wanted to keep the back fit pretty clean and you want to get back there to do some work, but you wanna stay comfy at the same time, then the Access custom fit bed mat is gonna be a great option for you. So let's check it out. The reason why I say is great for keeping the back of your bed clean is because of the material of this mat. Now this is gonna be a half inch polyester fibers, so what that means is it's gonna give us a little bit more cushion and it's gonna prevent a lot of that debris from ending up in our bed. It's also gonna help prevent any scratching from occurring because I wanna have this area that is protected and this carpet like material is gonna help anything that you are hauling from shifting outta place.
And what I also do like about this is how comfortable it is the working. As you can see, I'm right here on my knees and if I had to access any totes I have back here, I really don't mind that 'cause it is pretty comfortable and it's gonna be held in place via these grommets. And what's neat about that is we're gonna have plenty of them from all of our corners to keep this cinched down so we won't have any areas that bubble up. Really, you are gonna have two options. So the way we did it today was we drilled holes into our bed so we could actually install some grommets, but if you don't want to do any modifications to your bed like that, that's okay.
This also comes with these other grommets that have this adhesive backing to it. So if you ever wanna change your mind in the future and you don't want this mat anymore, you can just use these instead. What's also really nice about this is this is gonna be a custom fit for our vehicle today. So you notice that we do have our cutouts around our wheel wells so we don't have to worry about making contact with that or it's going to be any weird fitment issues. And why I especially like is we have these cutouts near our tailgate side for these anchor points.
So that will be obstructed either. Now, like I was talking about earlier, the way this is gonna install is through these grommets and there's a lot of other floor mats or bed mats that aren't gonna connect that way. Another one to check out would be the WeatherTech bed mat. And what I like about that is it's gonna look really sleek and clean back here. It's not gonna have this carpeted texture to it.
It's gonna look more OEM on your bed. The downside to that though is it's not gonna be near as comfortable to work in. So if you do find yourself constantly in your bed, this is gonna be a better option and that's not gonna secure down the way this does in a permanent fashion. Now if you are curious to see what this installation process looks like, just stay tuned, we'll walk you through it. To start off the installation, I'm gonna lay everything out and I'm gonna grab a few tools. So the first one I'm gonna grab is gonna be this drill and this 7/64 bit drill that's gonna have us make our holes. Now you don't need this if you're just gonna use the adhesive grommets that comes with your kit and we're gonna grab a paint pin so we can mark out where we are gonna drill. When you do put this in your bed, you're gonna just line it up to the contours and make sure everything fits properly. And then what we're also looking for is to make sure it's in the right orientation. So when I come over here, if I just flip this up, you are gonna notice that this is pushed out. We want it to look just like that and this other side that the flat. Where we're gonna start is with this grommet that's going to be nearest to your cab on your driver's side. And what I'm gonna do is use this punch tool that we have to leave a divot. Just go into the center, that grommet that's gonna leave a mark. Now this isn't required, it's just gonna make this process a little bit easier. If you have one on hand, definitely use it. If you don't, you can still just use your paint pen. And after, when that mark's made, I'm just gonna lift up on here, find that spot, and mark it out. With that mark made, I'm just gonna pull up on the mat, I'm grab my drill and I'm gonna start making a pilot hole. We're just gonna watch out when we are doing this 'cause we don't wanna go too far. We just need enough to get through the plastic of our bed. Once we've done that, we're just gonna make sure we clear off the area so we have a clearer spot to drill. This next part's just gonna require us grab the other end of that grommet and a screw, like peel this off. Once again, revealing that hole we just made, I'm gonna center everything up. Once we center that up, I'm gonna grab a Phillips screwdriver and put this into place. When you're doing this, you might need to put just a little bit of pressure on top of here 'cause you are going through this plastic, so you're gonna face a little bit of resistance. Now you'll notice we got this in there pretty far now. And actually something we discovered when we we inchesre doing it, we we inchesre facing a little bit too much resistance trying to get this screw in here. So we actually bumped up our bit to an eighth, just so we can get a bigger pilot hole so we can get that screw through here. Now, once that is in there all the way feels pretty tight, then just come back through. Make sure when you place this down it's gonna work properly. Should hear it snap into place. (snap) There we go. Now, sometimes you might have to shift this a little bit and the next one we're gonna do is gonna be on the passenger side in the back, near your tailgate, starting with this grommet. Just gonna repeat that same process after when that one's done and cinched down, then we're just gonna go all the way around until we've made a full circle and have 'em all attached. After we've installed all your grommets and you've snapped them into place on your bed, that'll complete our installation. That was just a look at the installation and some of the features of the Access custom truck bed mat in our 2015 Toyota Tacoma. I'm Matt, thanks for watching.
Average Customer Rating: 4.6 out of 5 stars (31 Customer Reviews)
This marine-grade truck-bed mat is the embodiment of tough: waterproof, resistant to rips and stains, and made to last. It's easy to install, and the snap-on, snap-off design is perfect for quick removal and reinstallation on your vehicle.A very good fit, it comes with screw down snaps to hold the mat in place, just unsnap like a jacket to clean or put heavy equipment in your Maverick pick up bed.
Read carefully!! I looked up a rubber mat and this was the only one they had that fit my truck…. It isn’t rubber. My fault for not reading the description. Looks to be a quality product even though it isn’t what I wanted.
Mat is good but not perfect. I did not use the snap-in clips and the mat is very thin.
A thicker rubber based mat would be better in my opinion.
Its sits well in my Pro4X bed and does not slide and has protected the bed for the whole year.
I would buy it again but .... Ribber a little thicker would be better
My last truck bed mat was 1/2 inch thick rubber and weighed a lot, so there was no trouble with it flying out at highway speed. This one, not so much. It is more like a piece of industrial indoor-outdoor carpet. Because of the light weight, it must be fastened in place with (included) snaps. These require drilling 11 holes in the bed of your truck. NO WAY on my 2013 F-150 with only 80 miles on it. However, there is another snap kit which has small pieces with adhesive that you glue down to the bed, then snap in the mat. I decided to go this way, since the truck is brand new and I'm not convinced about the durability of the mat. We'll see . . .
The Mat was reasonably priced and adds protect for the bed as well as my knees. Also, it is easily removed for cleaning. I would recommend this product. The profile is low enough that I can still place items in the bed and still close the Tonneau cover.
Really like the pad, however, the snaps do NOT hold it to the bed. Ended up purchasing heavy duty [hook-and-loop] tape and putting it on all the corners and middle. Has held with the [hook-and-loop] now for a year.
Feels good it could stand to be a tad shorter in length it can be cut but I elected not to at this time. I like the fact that it snaps in I used the screws on the buttons since I had a spray in bed liner which is a rough surface for the stick on snaps . Just put a camper shell on yesterday .
I have had my bed mat lines installed for a year now. The bed mat itself is a decent carpet over neoprene material, but the snaps are not that great. The middle side snaps lined up with the top of the bed ribs, but the middle lined up in between ribs so it pulled loose in a week. They use a sticky back tape to mount, and are about 3/8" contact area. They should have been made with a full 1 inch contact area to last better. Over a year they all ended up pulling loose. Finaly, the metal top snaps that are attached to the mat were ruined moving a washing machine, so there is no recover from that. The mat slides around now, and will blow out of the bed someday, unless I keep it weighed down.
Great! The snaps all have broken off but outside of that great!
I like the mat, it fits great but it is very light and should be attached to the bed per the instructions. If it was heavier I would give it 5 stars
Should have order tailgate cover also, but I like.
Works great. Awesome fit to the bed floor and around wheel wells
It does like to absorb water so watch out for rain.
GOOD SERVICE AND SALEMAN VERY PROFESSIO NAL
Great product. Could have used a couple of more
snaps, however, very happy with the mat.
Delivered almost overnight great job gu ys
Has really held up very good I’m impressed will buy again
Very durable and easy to maintain
Quick shipping, great price, fits perfect, easy to install.
Do you have a question about this Truck Bed Mat?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.