18-1/4" x 5-3/4" Rectangle. LED dome light provides bright light in extreme temperatures. Motion sensor activates light when motion detected. Durable polycarbonate housing. Surface mount. 2-Wire design with 0.180 male bullets. 8 Diodes.
Features:
Specs:
Lumens are used to measure the amount of usable light that is put out by a light source. Raw lumens represent the number of lumens that the manufacturer claims the LEDs are capable of producing. It does not include the light's drive method or the amount of light lost from the lens or reflector. Effective lumens take these factors into account and represent the number of lumens that are actually produced by the complete light assembly, not just the amount of light that the diodes are capable of producing. This light has a 1,400 raw lumen capacity and produces 990 effective lumens.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Optronics Opti Bright LED Dome light. This is designed for use in extreme temperatures so it's ideal for refrigerated trucks and trailers. It will withstand temperatures from negative 40 degrees fahrenheit to positive 140 degrees fahrenheit. Directly in the center it features the motion sensor so the light will come on automatically when motion is detected. Operating voltage is 7 to 30 volts DC. Voltage cutoff at 7 volts prevents battery drain.
So again, voltage cutoff is at 7 volts direct current and that prevents battery drain.You can use this with 12 volt and 24 volt DC systems. The light output remains consistent at all operating voltages and cuts off when the voltage is outside of range. Now this is an LED system. LED's make great replacements for incandescent lights. They last longer, they burn brighter and they are much more efficient.
You don't have to worry about replacing bulbs and you don't have to worry about brittle filaments with LED systems.It's a two wire design so you have you have your white wire, which is ground and black wire which is your power lead. And on the ends of the wiring we have the .180 male bullet connectors. If you don't want those on there, you can cut them off, strip back the wiring for hard wire applications. It features polycarbonate lens and housing, it's very strong and durable. We're looking at a clear lens with a white base.
When it comes to the installation, that's a recess mount installation. Mounting hardware not included but you will need to cutout for this portion right here in order for the light to sit flush.Now when it comes to the overall dimension. I took a measurement from edge to edge, got a measurement of 18 1/4" long. Side to side, we're looking at about 5 3/4" wide. And the overall thickness, or the overall depth, so from very front to very back is 1 1/8" thick.
Now from the installation surface to the front of the unit is only about 3/8" thick. So it's a nice low profile design once installed. The mount holds on the unit. You can see you have numerous mount holes around the perimeter of the light. These holes right here are separated on center by 2 3/16", these are separated on center by 4 3/4" and then this set to this set on center is 17 1/8". Your cutout needs to measure around 16 1/2" long by 4" wide.We're going to go and hook it up to power, that way you can see what it looks like with some power running to it. We'll also be able to turn off our overhead lights so you can see it in a lower light setting. So you can see here it sends out a very bright consistent signal. It's a nice bright light that has multiple LED's or multiple daioids so the multi daioids design helps optimize the overall light output. The raw lumen, when it comes to the brightness the raw lumen is 1400. Effective lumen output is 990. Power draw at 12.8 volts, 1.61 amps. Power draw at 24 volts 0.80 amps. And Optronics puts a life time warranty on the LED'sThat's gonna do it for today's look at the Optronics Opti Bright LED Dome Light.
Average Customer Rating: 4.8 out of 5 stars (301 Customer Reviews)
18-1/4" x 5-3/4" Rectangle. LED dome light provides bright light in extreme temperatures. Motion sensor activates light when motion detected. Durable polycarbonate housing. Surface mount. 2-Wire design with 0.180 male bullets. 8 Diodes.
Customer loved the light. He is purchasing them himself
Work great still in use today. Perfect for box trucks, the motion prevents drivers leaving the switch on draining the battery
QUICK FAST SHIPPING
Dimmable option is a great plus, have had no problems, will probably replace more fixtures in my trailer with these lights.
Exactly what I was looking for and needed.Replaced a dim incandescent light with an LED.
Light works great for low light and seeing around in the trailer when not using AC power. The AC lights are used when more light is needed. As always, etrailer
was superfast on delivery and always more than willing to help!
These lights have really improved the lighting in our trailer. The light shines on my counters and the lights are not the yellow kind, but more blue. These lights do not have on and off buttons so we have them where they are on with the wall switch. I will be ordering a couple more. Thank you
I installed 4 of these lights low on the wall to assist in lighting the tie down anchors and straps in my car hauler trailer. They are very bright and easy to mount with 4 screws. These 4 lights and the 3 ceiling lights that I purchased from etrailer.com work great in making an enclosed trailer very bright inside. The surface mount makes these lights AAA+.
Perfect light for our service truck. low profile, very bright, shipped quickly and received in a timely manner. Highly recommend.
I will be using these to replace 4' fluorescent in a 28' enclosed trailer. I have not yet installed them, however I connected them to 12-volt power and they are very bright. The flush mount design will make it very easy to install without any retrofitting or needing to do cut outs.
I used it in my 24 volt excavator as a replacement dome light.
Almost too bright!
Item ordered was perfect! Easy to order and locate on website, shipping was immediate and received quickly! etrailer you're AWESOME!
Great light output. I used them in my enclosed racecar trailer - lots of light and very little battery draw.
Have not yet installed lights into a unit yet,but from everything we can see the lights are exactly the same as one's purchased elsewhere but at a greatly reduced price.
I never received this item and never received the invoice even though my C.C. was billed for its days ago. Not too happy with the service this time.
Added 4 of these during a rustic hunting cabin lighting project. These are for the shed and provide awesome lighting. I didn't realize the back side of the shed door was cream colored because we never closed the door before due to needing all the light we could get. Because it is a shed and we run these off of batteries I used a standard bathroom fan timer switch to make sure the lights don't get left on forever.
Works much better than the incandescent ones I replaced.
These are fantastic. Replaced two main lights, both controlled by a wall mounted switch, in our 21' travel trailer. The additional light from these is amazing. We can now see inside the cupboards and closets without needing a flashlight. Installation was easy and straightforward, just remember that LEDs are polarity specific. Also keep in mind that these do not have a switch in them, which is why I only replaced the two main lights. We like them so well we just ordered another to replace the bathroom light, also controlled by a wall switch. I would replace all the lights with these if they had internal switches.
Best motion sensor light you can have for all temps
this was a great product, and an easy swap out. We have had it nearly a year now with no problems.
Great service, quick response time, I will work with etrailers in the future!
Just received the lights, easy to install and wire
The lighting in my cargo trailer contained 4 incandescent fixtures that had burned out bulbs most of the time. They never were really bright even when all worked. I took this pair of photos at night so you can see the difference. The LED lights burn cooler, use less of my storage battery charge, and the bouncing of the highway won't harm them. Well worth the price and an easy installation.
Great selection and even better customer service.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.