Dexter Tandem-Axle Trailer Equalizer Kit for 2-1/2" Slipper Springs - 14-1/4" Equalizers

Video Transcript for Review of Dexter Trailer Leaf Spring Suspension - Tandem Axle Equalizer Kit - HAP-258-01

Hello, Steven here with etrailer.com. Today we're gonna take a look at the Dexter tandem axle trailer equalizer kit for 2-1/2 inch wide slipper springs. Now, these are gonna be designed for use on trailers with tandem axles rated at 10,000 pound capacity general duty Dexter axles. Now, this kit will attach to four leaf springs, which are sold separately, to your trailer's frame. Now again, this kit is not gonna include the components needed for mounting the axle to the springs. You can use these in conjunction with our part number HAP-158-00.

Again, that's HAP-158-000 to complete the kit. Now, let's take a closer look here. Now, the equalizers themselves are gonna measure 14-1/4 inches long. And you're gonna have two hangers. They measure 4-1/2 inches tall, and that's gonna be from the bottom of that bolt hole to the top of it, 4-1/2 inches tall.

Now, this kit's gonna allow for 38 inches between your axles. It does come with one inch diameter center holes for mounting. And over here, it's got 3/4 inch holes for attaching to the hangar itself. This kit also includes two 4-1/2 half inch long by 3/4 inches thick spring eye bolts, and it also includes two 5-1/4 inch long by one inch diameter equalizer bolts. And all four of them are gonna come with the nuts as well.

This kit also comes with a nice set of instructions. That way you can get everything installed correctly. Again, I wanna thank you for joining me. This is Steven with etrailer.com and that's a look at our Dexter tandem axle trailer equalizer kit for 2-1/2 inch wide slipper springs.