Replacement Snap-In Grommet for Dexter Trailer Axle Tube Wire - Qty 1

Video Transcript for Review of Dexter Axle Trailer Axle Parts - Wiring Grommet - 046-124-00

Ellen: Hey everyone. I'm Ellen here at etrailer.com, and today we're going to be taking a look at the replacement snap-in grommet for your Dexter easy lube spindle. Now this is going to be a specific fit for a couple of different axles, or really just one type of axle, that's going to be the Dexter axle with EZ lube spindle 89 inch long with a 6,000 pound capacity. This is that little part that goes into the axle, and it's where the wires that come out are going to attach, so you can run those wires through the axle and connect them into your brakes, and keep those wires from getting frayed by the metal edge of the tube. It's just that little snap-in grommet that goes into that axle tube, to again, protect those wires.It's just going to be a single grommet, so if you need two of these guys, maybe they got cracked or broken while you're trying to fish some wires out of the tube, you will need to pick up more than one if you want more than one, but just should snap in there, there's going to be these two little prongs on either side, so those press in to snap it into place, as it goes into the tube those snap back out and they hold it secure. It's just going to be a hard plastic, so it should keep everything nice and safe inside there.That's pretty much all there is to it for our replacement snap-in grommet.

I hope this video's been helpful, if not, we do have other options available here at etrailer.com. Thanks for watching.