TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2"
(13 reviews)
Price: $1,125.29
In Stock
TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2"
Item # TLD1108-30
Our Price: $1,125.29
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (13)
- Q & A (0)
- Photos
TorkLift Trailer Hitch - TLD1108-30
- Class V
- 2 Inch Hitch
- 20000 lbs GTW
- Visible Cross Tube
- TorkLift
- 2500 lbs TW
- 30000 lbs WD GTW
- 3000 lbs WD TW
- Custom Fit Hitch
Use this 2" receiver with your OEM hitch to get a heavy-duty dual-receiver hitch. Tow a trailer and carry a bike rack simultaneously. Haul up to 30,000 lbs with TorkLift's exclusive weight distribution. Pre-drilled for camper tie-downs.
Features:
- Heavy-duty hitch lets you tow hefty loads, even when using a TorkLift hitch extension or weight distribution system (sold separately)
- Max out the 30,000-lb capacity with TorkLift's specially designed Everest weight distribution system (TLWD1000 - sold separately)
- Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time
- Single-receiver cross tube installs under your OEM hitch to provide 2 receivers
- Compatible with industry-standard ball mounts and hitch accessories
- Truck-camper-friendly TorkLift design
- Pre-drilled to accept TorkLift camper tie-downs (sold separately)
- SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper
- Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability
- Hardened, reinforced hitch pin holes prevent elongation from wear
- Bolt-on installation - no welding required
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish resists corrosion
- Safety chain loops are built in
- 2 Hitch pins and clips included - hitch locks sold separately
- Custom fit for your vehicle
- Made in the USA
Specs:
- Receiver opening: 2" x 2"
- 2" x 2" Adapter sleeve included for your factory 2-1/2" x 2-1/2" hitch reciever
- Rating: Class V
- Maximum gross trailer weight: 20,000 lbs
- Maximum GTW when used with weight distribution: 30,000 lbs
- Maximum tongue weight: 2,500 lbs
- Maximum TW when used with weight distribution: 3,000 lbs
- Maximum gross trailer weight: 20,000 lbs
- Cross tube dimensions: 4" x 4"
- Lifetime warranty
With the SuperHitch Magnum, you get a 2" receiver for standard towing, while maintaining your factory 2-1/2" receiver for heavy-duty towing. Add on the TorkLift Everest weight distribution system (TLWD1000 - sold separately), which is designed exclusively for SuperHitch hitches, and you can max out the 30,000-lb weight capacity of the hitch.
With 2 receivers, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time. And if you have a truck bed camper, this hitch has pre-drilled mounting points for TorkLift's super-sturdy camper tie-towns (sold separately). You can also add one of TorkLift's SuperTruss hitch extensions (sold separately) to extend the top receiver of the SuperHitch so that it clears your camper, allowing you to tow your trailer while your camper's installed.
Truck Bed Camper Compatibility
TorkLift is known for their truck camper tie-down systems and other camper accessories, so it just makes sense that they would have camper enthusiasts in mind when designing a trailer hitch. Each SuperHitch is built with integrated mounting points for TorkLift camper tie-downs, making it easier than ever to get a quality tie-down system for your slide-in camper.
The design of the SuperHitch also makes it easy to tow with your truck bed camper in place. The SuperTruss line of high-capacity hitch extenders is specially designed to extend the hitch receiver back far enough to clear your bed-mounted camper, while still allowing for an excellent towing capacity. An ordinary hitch extender can dramatically reduce your towing capacity. But each SuperTruss extension forms such a solid connection with the SuperHitch that the setup is able to maintain one of the highest weight capacities in the industry. When used with a standard weight distribution system, the setup can maintain up to a 10,000-lb weight limit, even with an extension that is 60" long. As a result, you can clear almost any truck bed camper and still do some heavy-duty towing.
Dual Receivers for Maximum Versatility
With the SuperHitch from TorkLift, you can tow your trailer and use a hitch-mounted bike rack or cargo carrier at the same time. This is thanks to the dual-receiver design of the SuperHitch.
Most trailer hitches have a single receiver. Typically, you can find an adapter or extension piece that will slide into your hitch to give you 2 receivers, but these adapters dramatically reduce both your towing capacity and your tongue weight, limiting how much you can tow, as well as how much you can carry with a bike rack or cargo carrier. This SuperHitch, which mounts beneath your factory hitch receiver to provide the dual receivers, is specially constructed to maintain a high weight capacity so that you can use the 2 receivers without sacrificing towing or carrying ability.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff is available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it, and we've towed with it, so whatever your question, we can answer it.
D1108-30 Tork Lift Magnum 30K Super Hitch with 1 Receiver for OEM Hitch
Replaces TorkLift TLD1104-30
This Product Fits The Following Vehicles
- 2013 - 2013 Ram 2500 with factory hitch
- 2016 - 2018 Ram 3500 6-1/2 Foot Bed with factory hitch
- 2016 - 2018 Ram 3500 8 Foot Bed with factory hitch
- 2013 - 2015 Ram 3500 Pickup with factory hitch
- 2013 - 2014 Dodge Ram Pickup 2500 and 3500 - with factory hitch
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Package not accepted
- Wrong item was ordered
- Missing parts
Customer Reviews
TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2" - TLD1108-30
Average Customer Rating: 4.7 out of 5 stars (13 Customer Reviews)
Use this 2" receiver with your OEM hitch to get a heavy-duty dual-receiver hitch. Tow a trailer and carry a bike rack simultaneously. Haul up to 30,000 lbs with TorkLift's exclusive weight distribution. Pre-drilled for camper tie-downs.by: Dave S03/22/2023
I’ve had the superhitch with 24” extension mounted on my 2013 Ram 2500 for 1 year now and use it frequently to pull my 16 x 7 enclosed trailer with my motorcycle and other gear inside. The hitch and extension give me the towing capacity I need for pulling trailers behind my Lance Truck Camper. I highly recommend the SuperHitch!
by: Steve04/27/2023
Not a bad install, they say 1 hour but it took me and my son 2 hours. If I hadn't helped he could have been done in 1 1/2 hours. Monster hitch with this attached to the Ram OEM hitch. Very well made and really an easy install. Hardest part was making sure we had the correct bolt holes on the frame. Did need to bend the heat shield over the spare (I actually cut it with snips)
by: Brian H.05/31/2017
Decent product structurally, but their finish is the absolute worst. Terrible. Hitch has been on the truck for less than a year, and it's already rusted to hell. Look at the picture, and compare it to the factory hitch which sits directly above the Tork-Lift. The same thing happened to the ball mount, but at least the ball mount was easy enough to remove for sanding and repainting... If you're considering a Tork-Lift product, sand it and paint it BEFORE you install it (which you obviously shouldn't have to do), or spend the money and have it powder-coated (which is what Tork-Lift should have done in the first place).
by: Bill07/08/2023
Anna did excellent. She was "all" that I believe that a customer servive representative should be, "great", telephone ediquette, product knowledge, listener, attention to detail(product availability,which product was best for me,cost comparisons of products, options for mailing,and a process to followup on status of mailing product from the manufacturer and my receipt of the product.Anna completed what I consider to be an "Excellent Customer Service" experience.
by: Paul09/05/2018
Purchased a Torklift SuperHitch 30,000, 48" SuperTruss extension, and frame-mount camper tie-downs to attach to the hitch. All parts were well made and finished. Installation instructions were not the most clear, but was able to complete the instruction. The hitch was missing 2 lock washers. I called TorkLift. They apologized and were willing to send me 2 new ones, but I didn't have time to wait, so bought them locally. Also, the hitch included 2 bolts to replace 2 of the original factory hitch mounting bolts. Unfortunately, they were not threaded far enough up the bolt. They thread into welded nuts on the factory hitch, and then part of the SuperHitch bolts over the exposed threads. When the bolts were threaded into the welded nut, the head was about 1/2" from contacting the flange. I didn't have time to wait for new bolts, so I bought enough flat washers to fill the gap.
Hitch set up works great. We primarily use it to carry a DraftMaster bike rack. The SuperHitch is much more stable than the one piece extension we were using. We also pulled a U-Haul trailer half-way across the country with no problems.
Great product. Great company.
by: Charles 02/20/2023
Not too hard to install, fits good and works perfect.
by: Ryan10/18/2018
2017 Ram 3500
Quality products with straightforward installation. I just wish the shipping was better. My hitch was pretty beat up when it was delivered to my house.
by: Adam04/08/2022
Install was fairly easy once I pulled up a video on etrailer. The written directions are very difficult to follow. Aside from that I am very satisfied.
by: Craig 09/22/2022
Very stout hitch. Happy with the produc t.
by: Dwight05/19/2019
My order was delivered complete and on time. Friendly, helpful staff.
by: Thomas 01/28/2022
by: Robert 04/10/2024
by: Kenneth 09/15/2023
13
13
See what our Experts say about this TorkLift Trailer Hitch
- Weight of TorkLift Original and Magnum SuperHitch Models TLD1108 and TLD1108-30 for Ram 3500TorkLift SuperHitch Magnum Trailer Hitch # TLD1108-30 weighs approximately 130-lbs. Shipping weight with all packaging materials is 135-lbs. SuperHitch Original Trailer Hitch # TLD1108 weighs approximately 122-lbs, and with packing materials its shipping weight is 127-lbs. The weight difference is mostly due to the different sizes of main cross tube. The Original has a 3-1/2 x 3-1/2-inch cross tube while the Magnum has a 4 x 4-inch cross tube. Both include all necessary mounting hardware...
view full answer... - Does Torklift Hitch # TLD1108-30 Fit 2018 Ram 3500 Dually 8 BedWe carried over the fit it looks like based on similar hitches from other brands that carried over. It looks like it's a situation where we "know" it fits based on other hitches that do but we haven't gotten the official work from Torklift yet (as of February 2018).
view full answer... - Does Factory Hitch Stay Installed When Installing Torklift Hitch # TLD1108-30I attached a link to the install instructions for the Torklift Super Hitch Magnum part # TLD1108-30 that you referenced for you to check out. In it you'll see that the factory hitch of the truck it is installed in does not get removed and the Torklift gets installed below it.
view full answer... - Comparing TorkLift Hitches TLD1108-30 with Dual Receivers and TLD1104-30 with Single ReceiverThe TorkLift trailer hitch # TLD1108-30 differs from their hitch model TLD1104-30 in that the first hitch is a dual receiver hitch, while TLD1104-30 is a single receiver hitch. Both carry 30K ratings.
view full answer... - Does the TorkLift SuperHitch Magnum Trailer Hitch for a 2018 Ram 3500 Replace the Factory HitchThe TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLD1108-30 which is a fit for a 2018 Ram 3500 does not replace the factory trailer hitch. It's designed to be used in unison with the factory trailer hitch. We do not have any options to replace the factory hitch.
view full answer... - Does Torklift Hitch TLD1108-30 for 2017 Ram 3500 Put Additional Hitch Opening Below OEM HitchYou are correct, the Torklift hitch part # TLD1108-30 that fits your 2017 Ram 3500 does put a hitch opening below your factory hitch to give you a heavy duty dual hitch setup.
view full answer... - High Capacity Trialer Hitch Recommendation for 2017 Ram 3500The TorkLift Trailer hitch part # TLD1108-30 that you referenced would be exactly what you need. It has a 20k total trailer capacity and 2,500 lb tongue weight capacity.
view full answer... - Recommended TorkLift SuperHitch For A 2018 Ram 3500 Dually Crew Cab Even if the mounting points on the frame match up the same between the 2018 and 2019 there are still numerous other factors that can affect the fitment of a hitch like the TorkLift # TLD1111-30. Per TorkLift, the only compatible fit for a 2018 Ram 3500 Dually crew cab would be the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1108-30. This hitch only has one receiver and will use your factory hitch as the second receiver. If you have a short bed it will most likely also require...
view full answer... - Torklift SuperHitch that Fits 2019 Ram 3500We have a Torklift SuperHitch Magnum that does fit your 2019 Ram 3500 with the part # TLD1111-30 but the part number you mentioned does not fit your truck.
view full answer... - Recommended TorkLift Trailer Hitch Receiver For 2014 Ram 3500 SRW Long BedI have another option for you, but the TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" # TLD1103-30 you mentioned is only confirmed to fit the cab and chassis models of the 2010-2017 Ram 3500/4500/5500 trucks. Since your 2014 Ram 3500 SRW Long Bed is a standard pick up truck you will need the TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2" # TLD1108-30 instead.
view full answer... - Torklift Hitch Recommendation for 2014 Ram 3500We have a similar Torklift hitch that is a fit for your 2014 Ram 3500 but the # TLD1101 is only for older Ram trucks and would not work for you. Instead you'd want the # TLD1108-30 which is the correct fit for your truck.
view full answer... - Can I Use a TorkLift SuperHitch for a 2014 Ram 3500 on a 2019 Ram 3500It looks like there is less than 1/4" difference between the frame width of the 2014 Ram 3500 and the 2019 Ram 3500, but as you mentioned - the B&W # BWHDRH25503 is a fit for both of these vehicles and there are no dimensional differences between the B&W and the TorkLift # TLD1108-30. The main differences between the TorkLift SuperHitch # TLD1111-30 and the older # TLD1108-30 is that the TLD1111-30 has the stacked 2" and 2-1/2" receivers that require the removal of the factory hitch. This...
view full answer... - Which Torklift Superhitch Fits 2017 Ram 3500For your 2017 Ram 3500 the correct Torklift Superhitch is the part # TLD1108-30.
view full answer... - Correct TorkLift SuperHitch Magnum Trailer Hitch Receiver for a 2018 Ram 3500The correct TorkLift SuperHitch Magnum Trailer Hitch Receiver for a 2018 Ram 3500 is part # TLD1108-30 which installs under the factory trailer hitch receiver. This combo will then allow you to use one of the TorkLift SuperTruss Hitch Extensions like part # TLE1524. There will be no cutting or drilling required. The TorkLift SuperHitch Magnum Trailer Hitch Receivers for a 2018 Ram 3500 don't replace the factory hitch.
view full answer... - Correct TorkLift SuperHitch For 2018 Ram 3500The correct SuperHitch for your 2018 Ram 3500 is the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1108-30. Then for the SuperTruss, that depends entirely on the length you need; for example, if you need a 42" extension you'd use the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 42" Long # TLE1542. I have added a link below to our entire selection of SuperTruss extensions.
view full answer... - Will Rear Tie Downs On 2018 Ram 3500 Short Bed Need To Be Replaced After Installing TorkLift Hitch?If you purchase the TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2" # TLD1108-30 for your 2018 Ram 3500 you will need to replace the rear TorkLift tie downs on your truck. You will need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLR3507 instead of the # TLD3109 you currently have. I included a video of the # TLR3507 for you to take a look at.
view full answer... - Correct TorkLift Frame-Mounted Camper Tie-Downs for a 2014 Ram 3500 Dually with TorkLift SuperHitchThe correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2014 Ram 3500 Dually is part # TLD2131 on 6-1/2' bed models or part # TLD2124 on 8' bed models for the front and part # TLR3507 for the rear with the TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLD1108-30. I have also attached our list of TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers below.
view full answer... - If a Torklift SuperHitch Magnum is Installed on a 2016 Ram What Torklift Tie Downs are RecommendedFor your 2016 Ram 3500 you would need a Magnum Superhitch like part # TLD1108-30 that works in conjunction with the factory hitch. You will then need to change the rear Torklift Hold Downs to part # TLR3507.
view full answer... - Looking for a Hitch Extension for my Ram 3500 with In Bed CamperIt looks like you're trying to get a good sized hitch extender for your 2018 Ram 3500. The Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long part # RP45018 is designed to fit any 2.5" x 2.5" hitch it then reduces the opening at the end to 2" x 2" for use with many different accessories. While I did not see any specific information regarding an exact figure you are going to loose hitch capacity when you bring the extension out that far without somehow adding some additional...
view full answer... - Can Camper Tie Downs Be Installed After The TorkLift SuperHitch Is InstalledThe TorkLift Custom Frame Mounted Tie Downs # TL84FR only fits the dually models with an 8 foot bed, without running boards, and must have a factory hitch installed. That being said, the TorkLift SuperHitch Magnum # TLD1108 already has integrated pre-drilled mounting points for TorkLift camper tie-downs so you can use # TL84FR with your factory hitch or the SuperHitch, so you can install it whenever you'd like.
view full answer... - Truck Bed 7-Way Recommendation and Camper Tie Downs for 2016 Ram 3500The 7-way adapter you need is the part # 41157. This will plug in-line with the 7-way you have at the rear of your truck and then will allow you to install a second one up in the bed of it. If the truck you get has the factory hitch the camper tie downs you would need are part numbers # TLD2124 and # TLD3109. If you went with a Superhitch like part # TLD1108-30 you would need instead the tie downs part # TLD2124 and # TLR3507.
view full answer... - Can The TorkLift 36" SuperTruss Hitch Extension Be Used With Dual Hitch Reciever On a 2017 Ram 3500?The TorkLift SuperTruss Hitch Extension # TLE1536 is only to be used with TorkLift SuperHitch dual-receiver trailer hitches. It will not fit into the Roadmaster Dual Hitch Receiver Adapter # RM-077-2 as the Torklift only has approximately 3/4" between the receiver tubes. You will need either the SuperHitch Original # TLD1108 or SuperHitch Magnum # TLD1108-30 to be able to use the TorkLift SuperTruss Hitch Extension # TLE1536 on your 2017 Ram 3500. You will also need the TorkLift Wiring...
view full answer... - Recommended Frame Mounted Camper Tie Downs for a 2005 Dodge Ram 3500 4x4 Long BedThe correct set of frame mounted tie downs that will fit your 2005 Dodge Ram 3500 with the TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLD1108-30 is the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLD2101 if you have running boards/nerf bars or part # TLD4101 if you do not have running boards/nerf bars for the front and the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLR3503 for the rear. Unfortunately, we do not have any replacement parts for the frame...
view full answer... - TorkLift Hitch and Camper Tie Downs for 2018 Ram 3500 Crew with Factory Hitch/Running BoardsFor a 2018 Ram 3500 Crew Cab with factory hitch and 8-foot bed we do have hitch fits that are shown on the linked page. These include both 2-inch hitches like Draw-Tite # 41929 which fits with a standard factory bumper and 2-1/2-inch hitches like TorkLift # TLD1108-30. This is pre-drilled for TorkLift camper tie downs. The fit of camper tie-downs depends on several factors including your hitch. TorkLift offers both steel and aluminum camper tie downs for the Ram 3500 Crew Cab 8-foot bed...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Wilson B
Updated by:
Isabelle B
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Laura E.
6/2/2017
Brian,Thank you for your recent review. It is not uncommon for hitches to rust over time since the hitches are made of steel. We recommend touching up with a good rust-inhibiting paint. We have published a helpful article regarding hitch maintenance at the following link:
Helpful Links
https:/faq-rust-prevention-maintenance.aspx.