Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13388
Retail:$435.78
Our Price: $243.73
You Save: $192.05
Confirmed to Fit
2011 Mercedes-Benz Sprinter
2500 Van - 144 inch Wheelbase - with standard bumper
2500 Van - 170 inch Wheelbase - with standard bumper
3500 Van - 144 inch Wheelbase - with standard bumper
3500 Van - 170 inch Wheelbase - with standard bumper
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (88)
- Q & A (0)
- Photos
2011 Mercedes-Benz Sprinter - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- 2 Inch Hitch
- Class III
- 6000
- Visible Cross Tube
- CURT
- 600
- 10000 lbs WD GTW
- 1000 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Mercedes-Benz Sprinter's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 10,000 lbs
- Maximum tongue weight: 600 lbs
- Maximum TW when used with weight distribution: 1,000 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13388 Curt Class 3 Trailer Hitch Receiver
Replaces Curt 13255
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Tech Tip
Hitch does not fit Passenger vans, and does not fit models with 30-3/8" frame, measured outside to outside of frame. Drilling required for installation
Complete Towing Package for 2011 Mercedes-Benz Sprinter
Retail:$564.56
Package Price:$341.65
2011 Mercedes-Benz Sprinter Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Sprinter Trailer Hitch Accessories
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13388
Average Customer Rating: 4.7 out of 5 stars (88 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Walt05/05/2023
I've ordered a couple products from etrailer.com in the past and as usual their customer service is Outstanding! This time I ordered the Curt Trailer Hitch Receiver (Item # C13388) for my 2023 Sprinter 144 Crew van. Paul B and Teresa T were very quick in returning my emails and calls when I received the first hitch in damaged condition. They apologized for the inconvenience and sent me a replacement immediately. Unfortunately the replacement hitch was also damaged on most of the edges, but not as extensive as the first shipment. Both times the shipping box was blown out on each side in multiple places. I learned from talking with Paul B at etrailers.com that the damage to the edges of the hitch originates from the way the manufacturer ships the product to them in a stacked arrangement. Don't be surprised if your hitch arrives protruding from the box in multiple places from bouncing around unpadded inside during shipment. I think some extra cardboard padding on all the steel edges and/or a more heavy duty shipping box would help greatly.
Be prepared to repaint several spots on your new hitch, unless you want the rusting process to begin prematurely.
5-stars for customer service. 3-stars for product arrival.
The hitch itself is fairly straightforward to mount. For this design/model I would recommend an initial "mock-up" mounting of the hitch so you can accurately mark and drill the two under-frame holes for the 1/2" carriage bolts. Dropping the spare tire isn't necessary, but you will want to disconnect the exhaust pipe from the hanger and secure it off to the side to allow room to work. I would also suggest to drill the two under-frame holes 5/8"- 11/16" to make the "fishing" process of the spacer and 1/2" carriage bolt go much smoother. Drilling the frame with a metal bit goes much easier than expected. The instructions do not give any guidance as to what size these holes should be drilled. Install did not take more than 1hr including drilling.
by: Cameron06/22/2023
The hitch mount was very easy to install! I have never had to fish a bolt through a frame before and that ended up being pretty straightforward. I had to buy a 5/8" metal bit to drill the holes which was easy enough. I do wish the directions mentioned what size bit to buy, but since the bolts are 1/2", it would make sense anything larger than 1/2" would work. Overall, great product from etrailer and an even better experience! Nice work team! Also, shoutout to Carol C for the follow up email!
by: Daniel02/13/2024
I installed this myself and it went very smoothly and a year later it is still rock solid and towing strong.
by: Michael 08/21/2023
Mercedes-BenzSprinter
I bought this a year ago for my Sprinter and it has worked well. It handled a 5000# car trailer with no problems and I appreciate the minimalist design compared to the factory hitch. I sprayed on an extra layer of bedliner and there hasn't been a speck of rust despite copious salt use in my neck of the woods.
by: OuterCulture01/12/2021
2019 Ram 2500
The product is solid, like every other hitch I've got from etrailer.com.
It was easy to install on my 2019 Sprinter van 2500. The instructions were straight forward and it didn't take a very long time to install the hitch (Maybe 20min total)
I really like the way it seats underneath the bumper
by: Scott06/22/2020
2019 Mercedes-Benz Sprinter 2500
Super easy install and perfect fit for my 2019 Sprinter 2500. Given that my intended use for the hitch was to attach a bike rack or additional storage, versus towing, I did not install the additional bolts that require drilling. Looks great, low profile
by: Dylan 12/05/2023
Ram 2500
I installed on 2500 sprinter model. I didnt realize you have to cut an access hole for 2 bolts with that model but other than that easy install with 2 people.
by: Eric06/01/2020
2019 Mercedes-Benz Sprinter 2500
The product was shipped in a really heavy duty box but still came pretty banged up. The instructions were good but this was supposed to be a bolt-in product. One of the holes needs to be drilled but since the entire frame is boxed I can't get the hardware through the other side.
by: Joe08/21/2020
Well thought out and engineered. Quality manufacturing. Please continue to offer and stand behind the best products. ‘NoAmazon’ for me. Straight to eTrailer.
by: Jian01/23/2024
super cost and delivery time
by: Chris11/19/2020
Greta fit. Easy Install. Quick shipping. Did exactly what I needed it to. Seems well manufactured. Company was very responsive.
Chris
11/19/2021
1 year later, still a great fit, product has held up well. Has been used regularly and required no maintenance.
by: Charles 11/30/2023
easy install and fit perfect
by: Michael09/08/2023
Packaging not good! Heavy scratches on bottom and a little on face not pleased at all / I don't have time to return I'll have to sand & paint. Leaving on trip!!!!! The product itself is great.
by: Mark 04/21/2021
2019 Mercedes-BenzSprinter
Installed on a 2019 Sprinter 4x4 for approximately a year, then removed it to install an Aluminess bumper/receiver/storage box/spare tire kit. There is a lot to like about this Curt receiver. The fit and finish are up to Curt's usual standards, and I like how the Curt receiver required drilling two vertical holes in the subframe to provide additional points of contact for the hitch receiver. I would trust the Curt receiver more than the Aluminess bumper/receiver/etc when towing a trailer with a weight-distribution hitch. However, because we need external storage and a second spare tire more than we need the ultimate Class III receiver, I removed the Curt. This is not a criticism of the Curt, and I don't regret the purchase.
by: Keith O.09/27/2017
Mercedes-BenzSprinter
For '09 Sprinter 3500. Good product, good fit. Less prone to rust than other brands.
Includes Grade 8 bolts. With other brands, I have had to purchase grade 8 bolts, because only grade 5 were included.
I only pull fairly light trailers. I wouldn't anticipate any problems with any size trailer.
A tab on the drivers side for the lights plug would be helpful. Self tapping screws in the side worked fine though.
If thread lock tape or liquid was included, that would be nice.
Thanks for providing a quality product and a reasonable price and super fast shipping.
etrailer is always great to do business with.
Thanks,
Keith
by: Richard 06/02/2023
2019 Mercedes-Benz Sprinter 2500
Hitch is in great shape and installed super easy.
by: Brian06/30/2022
Stout hitch that matches the quality of the factory unit. My van came with a factory hitch which I sold when I installed an aluminess bumper. After realizing the massive flaws with the aluminess bumper I tried to find another factory hitch for a decent price. Failing I bought this. Very impressed with this hitch. My bikes bounce less on this hitch than the factory unit. The 600lb tongue probably has something to do with it either way a great alternate to a very expensive Mercedes’ unit. S always etrailer is a great outfit.
by: Peter08/23/2021
Product worked as described and at a good price. Shipped and arrived quickly. The box was beat up and hitch was coming out of it when it arrived. This meant that the hitch was scuffed, chipped, and a bit beat up when I got it, which was disappointing.
Sierra K.
8/31/2021
I apologize about the scuffed hitch. Next time something is damaged in shipping please contact etrailer.com within the return policy timeframe of 60 days. You will want to cover the scratches with anti-corrosive spray paint to keep rust at bay.
Helpful Links
by: Marco10/01/2021
2007 Dodge Sprinter
My van had most of the holes pre-drilled.
Got it installed in under an hour with the help of the buddy.
Five stars
by: Mark06/20/2022
Very solid hitch, well made. It took me about 3 hours to install. Requires drilling two holes on the underside of the vehicle frame, the using a wire to fish the bolts into the frame of the vehicle. I could not accomplish the install until I modified the provided tool by adding an additional two foot section of bailing wire to the provided tool. I had some difficulty with understanding the provided instructions. The instructions could be a little more user friendly. Overall, I am very pleased with the this hitch and how it is installed on the vehicle.
by: Lee12/14/2020
2008 Dodge Sprinter
the Curt hitch for my Sprinter 2500, 144WB is great. It bolts right on and the only questionable part is drilling into the frame with ? drill bit. That a pretty big drill bit and the website doesn't tell you the drill size needed, but does mention "drilling required". Other than that all went smoothly. All hardware provided and the hitch was packaged very well. Hard to beat etrailer for quick and free shipping !
by: Nick 09/27/2021
Ram 2500
The installation instructions don't exactly work for a 2021 Sprinter 2500. The access hole to fish the vertical hardware through doesn't exist as the instructions point out. There is a smaller hole on the side of the rail, but it would have to be made larger to fit the bolt head through. Even if it was made larger I wasn't convinced the plate would fit through, given how long it is, and I didn't want to add another hole to the bottom of the rail. Instead I opted to not install the vertical hardware, though I'm not sure what impact that has on the rating of the receiver. I don't plan on towing anything too heavy, but if you are, I can't recommend this receiver for this van.
by: Jots10/04/2021
2015 Mercedes-BenzSprinter
Curt Hitch was self installed in about an hour. Did not run into any difficultly. I used a small car jack to help me lift up the hitch into place so that I can push the bolts through the holes. All-in-all a pretty smooth process. The hitch fit 2015 sprinter without factory rear step very well and looked good.
by: Asbel01/28/2023
Arrived within 2 days and fit perfectly. Installation took 30mins.
25
96
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch Recommendation for 2015 Mercedes Benz Sprinter 170 inch WheelbaseYes we do have a hitch that fits your vehicle. You would want the Curt hitch part # C13388 which is confirmed as a fit for your 2015 Mercedes Benz Sprinter 170 inch wheelbase without step bumper. I have included a video of the hitch installation to help you along.
view full answer... - Curt Trailer Hitch for 2018 Mercedes-Benz Sprinter 2500 with 144 Inch Wheelbase As long as your 2018 Mercedes-Benz Sprinter 2500 with the 144 inch wheelbase is equipped with the standard bumper (not the step bumper) the Curt Class III Trailer Hitch # C13388 that you referenced will fit and work perfectly. This Class III hitch features a 6,000 pound towing weight capacity and a 600 pound tongue weight limit. Please note that during installation you will need to drill some holes into the bottom of the Sprinter's frame. I have attached the complete installation instructions...
view full answer... - Trailer Hitch Receiver For a 2021 Mercedes Sprinter 3500 170 Wheelbase and Dual Rear WheelsThe Curt Trailer Hitch Receiver # 13358 will fit a 2021 Mercedes-Benz Sprinter 3500 that has a 170" wheel base and the dual rear wheels. This receiver is designed to fit models that have the factory step bumper, and will not fit passenger vans or frames that are only 30-3/8" wide outside to outside. I have linked an installation video below that was done on a similar 2014 Sprinter The Curt Trailer Hitch Receiver # C13388 is for models that have a standard bumper and not the step bumper....
view full answer... - Are the Hitches for a 2007 Dodge Sprinter with Standard and Step Bumper the SameThe trailer hitch options for a 2007 Dodge Sprinter are different for models with the factory step bumper and models with the standard bumper. The two are not interchangeable so if you have the factory step bumper then you'll need the Curt Trailer Hitch Receiver part # 13358 or if you have the standard bumper then you'll need the Curt Trailer Hitch Receiver part # C13388.
view full answer... - Why is There Different Hitch Fits for 2015 Mercedes Benz Based on Rear Step BumperThe mounting brackets of the hitches are totally different as the step bumper changes how the vehicle is setup. For your 2015 Mercedes Sprinter that has the 170 inch wheelbase and no step bumper the correct Curt hitch is the part # C13388. If instead you had the step bumper you instead would want the part # 13358.
view full answer... - Could Step Bumper of 2014 Mercedes Sprinter be Removed and Hitch InstalledCurt does have a hitch that fits the 170 inch wheelbase versions of the 2017 Mercedes Benz Sprinter vans but it's not the part number you mentioned as it's actually the part # C13388. This requires frame drilling if the van is a 2500 model and would fit as long as your frame doesn't measure 30-3/8 inches from outside to outside. I attached a picture of the hitch installed to show the ground clearance.
view full answer...
- How to Add Wiring Connector Bracket to Curt Motorhome Trailer Hitch ReceiverThe pre-existing bracket you're referring to is something I've only seen Draw-Tite do with their hitches, but we still have a way to add the same type of bracket pretty easily to your Curt Trailer Hitch Receiver # C13388. For your application you're going to need the Curt No-Drill Bracket # C57202 and then one of the following depending on what type of wiring connector you have on your motorhome: - 4-Way Connector # C42CR - 7-Way Connector # C67UR
view full answer... - Difference Between etrailer & Curt Trailer Hitch For 2023 Mercedes Sprinter 2500 Cargo VanThere is just a single difference between the Curt and etrailer trailer hitches that fit your 2023 Mercedes-Benz Sprinter 2500 Cargo Van, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you prefer. The hitches that fit your Sprinter 2500 are the following part numbers: - etrailer Trailer Hitch Receiver # e76AR - Curt Trailer Hitch Receiver # C13388 The matte black finish is nice as it hides the inevitable...
view full answer... - Will the Curt Trailer Hitch # C13388 Fit a 2010 Mercedes SprinterThe Curt Hitch # C13388 is confirmed as a fit for the 2010-2015 Mercedes Benz Sprinter 2500, 144- inch wheelbase with a standard bumper. For a complete towing set up you may be interested in the following items: Etrailer Ball mount kit # 989900 - includes 2 ball mounts, 1 1-7/8 inch trailer ball, 1 2-inch trailer ball, a pin and clip, and a bag. Wiring Harness # C59496 - includes a circuit tester, quick connectors, and a fused power wire. Check out the helpful article that I have...
view full answer... - What Hitch Receiver Will Fit My 2020 Mercedes-Benz Sprinter 2500Yes, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # 13358, will fit your 2020 Mercedes-Benz Sprinter 2500 if it is either the 144" or 170" wheelbase with the factory step bumper. This hitch receiver has a maximum tongue weight of 500 lbs and a maximum gross trailer weight of 5,000 lbs. If you have the standard bumper, you will need Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # C13388, instead. This hitch receiver has a maximum tongue weight...
view full answer... - 2021 Mercedes-Benz Sprinter 2500 Wiring Mounting Bracket Options for Curt Trailer HitchTo hang a wiring connector from the Curt Trailer Hitch Receiver # C13388 on your 2021 Mercedes-Benz Sprinter 2500 you need a No-Drill Mount Bracket # C57202 and then you can use the Bracket # 18144 for the 4-Way # C59236 or the Bracket # 18138 for the 7-Way # TK22115.
view full answer... - Recommended Trailer Hitch for 2007 Dodge Sprinter 2500 with 170" WheelbaseIt's likely you actually have a 2007 model year as that is when the longer 170" wheelbase was used and in which case you can use the Curt Trailer Hitch Receiver part # 13358 if you have the factory step or part # C13388 if you just have the standard bumper.
view full answer... - Curt vs Draw-Tite Hitch Comparison on 2011 Mercedes 3500 Sprinter with Standard BumperI'd go with the Curt hitch part # C13388 for your 2011 Mercedes 3500 Sprinter with a standard bumper since it has the higher capacity like you mentioned. For a swinging enclosed hitch carrier, the Yakima EXO Swing Away Enclosed Cargo Carrier - 2" Hitches - 10 cu ft - 100 lbs # Y62VR, or the double carrier # Y74ZR would work well for you. This modular system can even be expanded so you can swap a cargo box for a bike rack or ski carrier (sold separately) to match your outdoor adventures. Another...
view full answer... - Which Curt Trailer Hitch Fits 2017 Mercedes Sprinter 2500 with 170 inch WheelbaseCurt does have a trailer hitch that fits your 2017 Mercedes Benz Sprinter 2500 with a 170 inch wheelbase as the part # 13358 for if you have the factory step bumper or the part # C13388 for if you have the standard bumper, but the part # 13275 you referenced is for older versions of the Sprinter so it is not the correct hitch.
view full answer... - Recommended Trailer Hitch For 2020 Mercedes-Benz Sprinter 2500 Long Wheelbase Standard BumperAs long as your 2020 Sprinter 2500 with the 170 inch wheelbase and standard bumper isn't a passenger van and the frame members do NOT measure 30-3/8 inches apart measured outside of frame to outside of frame, the Curt Class III hitch, part # C13388 will fit perfectly. If you have the passenger version, you'll want to use the Draw-Tite # 75549 instead. If you'll be towing with the hitch, you'll also need a trailer wiring harness like part # TK82VR for a 4 pin connector or # TK22115 for...
view full answer... - Which Trailer Hitch For A 2021 Mercedes-Benz Sprinter 2500 Gives The Most Ground Clearance?For your 2021 Mercedes-Benz Sprinter 2500 with the standard bumper, the Curt # C13388 and the Draw-Tite # 75549. While we have not had a chance to install both of these hitches yet, when we measured these hitches we found that from the center of the upper mounting hole to the bottom of the hitch on the Draw-Tite # 75549 measured 12-1/4" where the Curt # C13388 measured 11" which you can see in these diagrams, meaning the Curt hitch will sit closer to your bumper and give you better ground...
view full answer...
- Which Trailer Hitch for 2019 Mercedes-Benz Sprinter 2500 Sits Higher Off Ground We haven't had the chance to install both the Curt # C13388 and Draw-Tite # 75549 trailer hitches on the Mercedes Sprinter to do a comparison, however I did go out to our warehouse to take a measurement on each to determine which will sit higher off the ground when mounted. For each hitch I measured from the center of the top mounting hole to the lowest point. On the Curt hitch this measurement was 11" and on the Draw-Tite it was 12-1/4", meaning the Curt # C13388 is definitely the best...
view full answer... - Trailer Hitch for a 2019 Mercedes-Benz Sprinter 2500 with 170” Extended WheelbaseYes, the Curt Trailer Hitch Receiver # 13358 is confirmed to fit your 2019 Mercedes-Benz Sprinter 2500 with 170" extended wheelbase as long as you have the factory step bumper. You can check out the video linked below for installation details. If you have the 170" wheelbase with the standard factory bumper, you need # C13388.
view full answer... - Trailer Hitch for 2016 Mercedes-Benz Sprinter 2500 That Sits Higher Off the GroundThe trailer hitch we offer for your 2016 Mercedes-Benz Sprinter 2500 that sits the highest will be the Curt # C13388 which fits right under the rear bumper like the picture I attached. It will sit about 1-1/4 inch taller than the Draw Tite.
view full answer...
- Recommended Class III Trailer Hitch Receiver For 2014 Freightliner Sprinter 3500 DRW 170" WheelbaseI have an option for you, but both the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13388 and the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75549 which are confirmed to fit your 2014 Freightliner Sprinter 170" wheelbase Dual Rear Wheel will stick out slightly past the non-step rear bumper as you can see in the included pictures. Between the two I recommend the Curt # C13388 since it has a 10000lb trailer weight rating and 1000lb tongue weight...
view full answer...
- Which Curt Hitch Fits 2013 Freightliner Sprinter 2500 170 inch WheelbaseWe do have a Curt hitch that fits your 2013 Mercedes Benz 2500 with a 170 inch wheelbase and a factory bumper with the part # C13388 but the # 13375 only fits the shorter wheelbase versions.
view full answer... - Recommended Hitch for 2024 Mercedes-Benz Sprinter 2500 With Long Wheelbase and Standard BumperFor your 2024 Mercedes-Benz Sprinter 2500 I recommend the Curt # C13388. This is a Class III hitch with a 2" receiver and a bolt-on installation. This hitch has a max gross trailer weight of 6,000 lbs and max tongue weight of 600 lbs. It also comes with a limited lifetime warranty. If you plan on towing you will also need wiring. The Curt # C59236 taps into your existing wiring with the included quick-splice connectors. This will provide you with a 4-way to power your trailer's signal lights.
view full answer... - Hitch Recommended for 2019 Mercedes-Benz Sprinter 2500 Cargo VanOn this particular vehicle, the design of the rear bumper and its relation to the frame will dictate where the hitch sits. All the hitches available for the 2019 Sprinter 2500 with the standard bumper will sit pretty much up against the underside of the rear bumper as shown in the provided photo. Of the two hitches available for the way your van is set up, either the Curt # C13388 or the Draw-Tite # 75549 would work perfectly. Both hitches have similar weight capacities, but Curt has a...
view full answer...
- Hitch and Wiring Recommendation for a 2012 Mercedes Sprinter Van 2500 w 170 WheelbaseSince your 2012 Mercedes-Benz Sprinter with a 170 inch wheel base does not have a step bumper you would want the Curt Trailer Hitch # C13388. The Curt Hitch # 13358 that you referenced would not work for you because it is designed for vehicles with step bumpers and you do not have one. For wiring I would recommend you get a Tekonsha Custom Fit Vehicle Wiring # 118650. I attached installation instructions and an installation video for this product for you to check out also.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Ronnie R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria B.
6/10/2020
For your 2019 M-B Sprinter 2500, the bolt hole for the underside attachment point will need to be drilled. There should be a larger access hole into the box frame further up the frame. The hardware will then be fishwired through the larger access hole into the bolt hole to attach the hitch. I have linked the installation instructions for you.
Helpful Links
instructions.aspx?pn=C13388