etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e98868
Retail:$405.95
Our Price: $160.33
You Save: $245.62
Confirmed to Fit
2013 Honda CR-V
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (791)
- Q & A (0)
- Photos
2013 Honda CR-V - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Class III
- 2 Inch Hitch
- 3500
- Visible Cross Tube
- 350
- etrailer
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Honda CR-V's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Not rated for use with weight distribution systems
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e98868 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
350 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
350 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Tech Tip
Hitch opening is recessed under the rear bumper more than usual, so you will want to verify any hitch accessories to ensure clearance and fit. No drilling required for installation , Exhaust must be temporarily lowered for installation , Underbody trimming required (not fascia)
Complete Towing Package for 2013 Honda CR-V
Retail:$508.44
Package Price:$237.30
2013 Honda CR-V Owners Who Purchased This Trailer Hitch Also Bought...
Popular CR-V Trailer Hitch Accessories
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98868
Average Customer Rating: 4.9 out of 5 stars (791 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.by: One-person installation without lifting vehicle03/08/2023
Honda
I purchased the hitch to mount a bike carrier on my 2014 Honda CRV. I am very happy with the purchase. The installation was easy thanks to the excellent documentation and outstanding video with all the details as to the bolt and fastener dimensions and locations.
I am 70 years old, just retired from a Field Service Engineer job with ASML and installed the hitch by myself without jacking up the rear of the CRV and only using the CRV tire-changing jack to lift the hitch. I put the hitch on the shipping box with the opening facing back and put the jack inside the box about 1/2 way toward the drivers side and then jacked that side up. (see first picture) The box kept the hitch fairly level, wouldn't slip down and off the concrete (I kept myself off the concrete using a rug). Then I lifted the drivers side of the hitch up and started the two bolts on that side. Then I took the shipping box out, jacked up the hitch on the drivers side to within 1/4" and then screwed in those two bolts. Everything fit perfectly per video and I had no issues with corroded bolt holes due to California conditions, also U-bolts fit fine did not overlap as previous reviewers had experienced. Overall great !!
by: Steve 04/03/2024
2016 HondaCR-V
Hitch has worked great so far (bike rack). Installation went smooth except for CRV body holes needed a little work prior to attaching hitch. After one year there is barely any rust showing as I saw that might be occurring but so far that is not seen.
by: John 06/15/2024
2014 HondaCR-V
Good quality hitch. I installed it by myself. Used shipping box to support it. Easy install. Would have been a little easier with a helper. Took about an hour. Make sure you clean the threads well with a wire brush.
by: Cody 04/09/2024
This is a sturdy hitch receiver. I think it looks discrete when not in use, and works well when it is. After one New York winter there is only minor surface rust forming on areas that contact the hitch and safety chains.
by: Chris 05/26/2024
Toyota
Hitch came quick , fit great but had to purchase tap in order to install. Holes were a little rusty,couldn’t thread in bolts with out it. Maybe you could include them in your kit. The last hitch I bought from you for a Toyota I had to do the same thing. Otherwise good product.
by: James 06/05/2024
Simple installation, effective device that couldn't work any better!No complaints!!
by: Wilson F03/13/2024
2016 HondaCR-V
This is the second etrailer Hitch for a CRV that I have purchased in the last 10 years: first for my 2002, now for my 2016 CRV. I am so happy with the strength of the hitch, and the fit with my CRV. Also, the installation videos are spot on! The hitch is heavy duty, but nothing that one adult and a 12 year old boy cannot handle, and without lifting the car either! (Also, as the video explained, there was no need to remove the underside mud shield to make needed cut; a sharp utility knife works fine.
by: Mark 03/20/2024
Honda
Purchased a good quality trailer hitch for my 14 Honda CRV. Overall satisfied with the product. Would buy from them again
by: Joe11/27/2023
This product was easy to install and looks great on the car.....it looks "OEM". I purchased it to add a tow/receiver option to a vehicle that I was taking to our vacation home to keep there. Bike rack, small trailers and some receiver mounted transport accessories work perfectly with this product. I will never pay the $700-$1,000 that I have paid in the past for an OEM product when I purchase a vehicle again. If you have 90 minutes, the right tools and half a brain, you can do it!
by: Steve A.06/22/2020
2013HondaCR-V
The hitch arrived promptly, and well packaged. I have a 2013 CRV which have the nuts welded into the frame which I thought would make for a quick installation. I only cut 3 sides of the plastic underbody, and then cleaned the screw holes with the brush. Went to test fit the bolts and the muffler side nuts were totally rusted. Tried the brush some more, no luck. Tried a dental pick, no luck. Finally my son used a Dremel with a small wire brush and was able to get both muffler side nuts cleaned. I finally could hand thread all the bolts into the nuts. Once this was completed it only took 20 minutes to install the hitch. We did use the U bolt and nuts bolted to the tow hook to hold the hitch while we bolted it to the frame. It took us 2 1/2 hours, 90% was cleaning the rust from the welded nuts.
I will be securing the cut flap with some aluminum stock and pop rivets, as I feel the duct tape will fail over time.
Note: the two flange nuts for the tow hook are to wide and over lap, so I can't get one flush against the hitch. I plan on replacing 1 or both with grade 8 nuts, washers and lock washers. Waiting for a reply from customer service.
Steve A.
6/22/2021
Its been 1 year and the hitch is still looking good. I havent replaced the nuts used on the tow hook. Im only transporting 2 bikes so Im not to worried.
by: Robert 06/06/2024
Very nice hitch. It fit just perfect, easy to install.
by: Brad05/15/2020
2015 HondaCR-V
This is my third time ordering from etrailer.com and they always provide a great experience. The hitch came exactly as expected with no issues. I watched the installation video several times and then went to work. Everything they said in the video was exactly as expected. No surprises at all. I even used some of the tips from the other reviews to make the installation even better (I didn't cut out the entire piece from the under-panel, just cut it on three sides, folded it back, attached the bolts to the frame and the folded the under-panel right back into place). The CR-V looks GREAT with the new hitch. My daughter will now be able to load her own bikes and leave the other car to us! Kudos to etrailer!
Brad E.
5/16/2021
It works great! My daughter loves it and it is easy for her to use! Installation was easy from looking at the online videos. I even used the trick of not cutting the entire hole off, but instead tucked it back and then used Gorilla Glue duct tape to hold it back in place.
by: Justin09/28/2023
Box was not damaged but when I inspected the hitch, there were several scratches and scuffs (some pictured). Now I will need to touch up a few spots so it doesn’t rust.
Jenny N.
9/28/2023
These hitches are shipped together in large pallets which does result in scratches from time to time. I will have our Customer Service team reach out to you. We recommend using a rust resistant spray paint like Rustoleum to touch up the hitch.
by: Meredith03/31/2024
Not satisfied with the quality; less than a year after installation it started rusting
by: Brian08/12/2020
Received hitch a day earlier than promised. Installed on a 2016 Honda CRV. Removed rear trim and hangers for muffler. Cut trim to clear left bracket and installed both trim and hitch together. A little more difficult but it looks great! This is the second hitch I have installed from etrailer, both were great! Including photos of cutout and install.
Brian
8/13/2021
Have used to haul my two bikes all over the place! Works great! Finish still looks great, it’s holding up fine.
by: Glasswing04/25/2024
Honda
Product went on with no issues. Very solid ans looks great on my Honda CRV. Arrived on time exactly as promised. Very impressed with the speed and accuracy of my order.
by: Steve05/26/2020
Love the etrailer.com 2" receiver i bought. 4 hours of hell to install in my garage, but look at me now! the thing works great for my mountain bikes, and i can use it for trailer, or other hitch mount tech. perfect.
Steve
5/27/2021
Very well. No problems, rock solid.
by: Mark09/05/2022
2016 HondaCR-V
Perfect fit and not too hard to install once frame bolt holes were cleaned out. Delivery was very quick and all parts and instructions were intact. Looks great on vehicle. Very pleased with purchase. Installation video from etrailer webpage was a big help. Very user-friendly and informative webpage offering a great selection of product.
Mark
9/6/2023
After a years use, still pleased with product.
Mike L.
10/27/2023
@Mark We're glad to hear that your # e98868 etrailer brand trailer hitch is still working well for you!
by: Brian10/07/2022
The product is good and the fit was correct. There were some scratches from shipping or manufacturing? If I didn't have the deadline at the time... and if this wasn't going under my vehicle, where it gets scratched and dirty anyway... I would have asked for a replacement. As such... it got installed and worked great for simple bike rack or cargo carrier. My only issue was cleaning the rusty threaded holes... but that's not anybody's fault except the PA winter, salty roads!
by: Gary 05/19/2023
Easy to use, very strong and secure.
Gary
5/20/2024
it is working out very well.
by: James 01/14/2024
It fit well, but the trimming instructions for the plastic wins panel weren’t as clear as they could have been. Everything bolted up ok. I was worried about getting the muffler hanger piece on and off but that went just fine. A pater template for cutting lines would have been nice, or maybe some dimensions.
by: Satisfied C11/01/2023
Honda
Quick install (by a company, not me) and I am ready to go. It was part of upgrading my Honda CRV with a cargo carrier and now I have nearly double my storage space for drives.
by: Bob04/01/2022
Honda
I bought this to mount on my wife's Honda CRV, following my first purchase two years ago of one for my Jeep Renegade. I was actually able to get the hitch mounted with no extra help, although it is darn heavy and awkward when you're laying on the garage floor. The directions were clear, and the template for cutting the plastic skid shield was dead-on accurate. I only give it four stars because on the of mounting bolts would simply not thread on. Since we only use them for our bike racks, it didn't cause a problem, and when my wife brought her car in for inspection the mechanic was able to get the bolt to thread. In sum, the hitch works great and is super sturdy.
Bob W.
4/11/2023
Still works great. Its only used to hold a bike rack, so there is no real stress applied to the hitch.
by: Michael07/11/2022
2014 HondaCR-V
Hitch arrived a little ahead of schedule. Always appreciated. I like the rounded tubular look of this hitch. Install was easy and the video on etrailer hit the nail on the head. Took me about 90 minutes but not because it was hard, confusing or a challenge. One thing, put all of the plastic pan fasteners back in after re-install, before you mount the hitch. Well done etrailer.
by: Charles 01/24/2024
Prompt delivery. Great fit and finish. Easy installation.
25
791
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- Recommended Hitch for a 2013 Honda CR-VI would be happy to recommend a hitch for your 2013 Honda CR-V. I saw you were looking at the etrailer item # e98868 and the EcoHitch item # 306-X7297. Both of these hitches are confirmed to fit your 2013 CR-V. They are custom fit and bolt to your Honda with included hardware. Both the etrailer and the EcoHitch are class III hitches with 2" receivers. They each have identical towing capacities at 3,500 lbs and both are made in America. The main difference in capacity is the EcoHitch has...
view full answer...
- Recommended Hitch for a 2014 Honda CR-V Wider options for accessories and higher capacity on bike racks. The highest capacity class I and II bike carriers top out at 65 lbs. A class III bike rack can go over 80 lbs per bike and still stay under your CR-V's tongue weight. Often times, including this one, the class III hitches are less expensive. For your 2014 Honda CR-V, I recommend the etrailer Trailer Hitch item # e98868 you were looking at. This is a class III hitch with a 2" receiver. It is custom fit and bolts to your Honda...
view full answer... - Recommended Hitch for a 2013 Honda CR-VYes, you definitely can! To install a class III hitch on a 2013 Honda CR-V, I recommend the etrailer item # e98868. This hitch is custom fit and bolts to your Honda with included hardware. It has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. I have attached a couple of pictures and linked an installation video below so you can see what this hitch looks like once installed. If you are planning on towing you will also need a wiring harness item # C56158 and a ball mount...
view full answer...
- What Rack do You Recommend for Transporting 3 Bikes on a 2013 Honda CR-V?I have a great solution for you. Since the tongue capacity of your 2013 Honda CR-V is 150 pounds, the only way for the Kuat Transfer 2 # KU24FR is if your friends' bikes weigh no more than 30 pounds for one and 29 pounds for the other (which is extremely light for adult bikes). Also, the Thule Helium Pro 3 # TH9043PRO and the Camber 4 # TH9056 will not work because those racks only have a maximum per-bike weight capacity of 37.5 pounds. A great solution is the SportRack Pathway Deluxe...
view full answer... - High/Low Beam Light Replacement and Hitch Recommendation for 2014 Honda CR-VI do have some recommendations for you for high and low replacement bulbs for your 2014 Honda CR-V. We have some that have a white tint while other have a blue tint and I'll list them below but really the only difference is preference. If you want to stick with something a littlre more traditional then go with the white, otherwise the blue looks great too: Premium White High/Low Beam - # VX-DH4 Superwhite (Blue Hue) High/Low Beam - # VX-LH4 Attached are some review videos for you to...
view full answer... - Recommended Hitch for a 2015 Honda CR-VYes, it will. The etrailer Trailer Hitch item # e98868 is custom fit and designed specifically for the 2015 Honda CR-V. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. So this hitch will work with most hitch mounted accessories and has the ability to pull a trailer. I have attached an installation video below to help you get this hitch set up. If you are planning on towing you will also need a wiring harness item...
view full answer... - How to Carry Two E-Bikes at Rear of 2014 Honda CR-V That is Getting Flat TowedThe best solution we have would be to install an e-bike rack like the Hollywood Racks RV Rider part # HLY64FR in a 2 inch hitch installed on the 2014 Honda CR-V like the # e98868. It would be really difficult to come up with a hitch extender solution and bike rack with enough capacity that would also not have clearance issues.
view full answer... - Recommended Bike Rack for a 2015 Honda CR-V Carrying 2 E-Bikes and Rack Weighing 172 lbs.For your 2015 Honda CR-V that is carrying 2-bikes and a bike rack with a combined weight of 172 lbs., I recommend the etrailer Trailer Hitch Receiver # e98868. The 172 lbs. of your bikes and rack are going to factor in your tongue weight, the etrailer Trailer Hitch Receiver # e98868 has a tongue weight capacity of 350 lbs. so it will be able to handle your bikes and rack. It also features a no-drill, bolt-on installation and matte black finish.
view full answer... - Can the Under-Panel on a 2013 Honda CR-V be Left Off After Installing a Hitch?As the plastic cover that needs the trimming is just there to cover the fuel tank on your 2013 CR-V, you can definitely leave it off. From the install video I included, you can see that nothing really ties directly into this panel.
view full answer... - Best Hitch for a 2014 Honda CR-VI would be happy to help you find a hitch for your 2014 Honda CR-V. The Draw-Tite Max-Frame Trailer Hitch Receiver item # 75902 you referenced does not fit your CR-V it is for 2008-2020 Nissan Rogues. The etrailer hitch item # e98868 you were looking at is confirmed to fit your 2014 CR-V. This hitch is custom fit and bolts directly to your frame with included hardware. I have linked an installation video below. If you need a wiring harness to control your trailer or accessories lighting...
view full answer... - Do I Need to Use a Bike Frame Adapter Bar for a Womens Bike when Using the Swagman Current?I have a great alternative for you. Unfortunately, yes - you will need to purchase a bike frame adapter bar like the Saris Bike Beam # SA3040 in order to use a women's-style frame on the Swagman Chinook - 1-1/4" and 2" Hitches # S64683. However, with that being said, I have a great bike rack that does not require a bike frame adapter. For that route, I recommend the Saris Freedom Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount # SA4412B. Since the cradles on the Freedom adjust...
view full answer... - Comparing Hollywood Rack Sport Rider Bike Racks for Toyota Corolla and Honda CR-VGreat questions! And thank you for coming our way for hitches on your vehicles! We'll start with hitches and then move our way over to the bike rack: For your 2006 Toyota Corolla you are correct about the 1-1/4" hitch options and for that I recommend the Curt # C11265 which is a Class I hitch. Curt typically has a thicker powder coat over Draw-Tite so this will weather the elements better. For your 2014 Honda CR-V I have 2 different options based on price-point and design; the etrailer...
view full answer... - Recommended Trailer Hitch Receiver For 2016 Honda CR-VI would be happy to help! Based on the information I was able to find on the factory trailer hitch for your 2016 Honda CR-V, it would have a 1-1/4" receiver. With that said we typically recommend a 2" trailer hitch receiver as it gives the most accessories. While right now you are only wanting to carry a bike rack of which there are a multitude available for both 2" and 1-1/4" receivers, if you decided in the future you would like to use a cargo trailer, or a ball mount for light duty...
view full answer... - Will Hands-Free Liftgate Still Work with Trailer Hitch Installed on 2016 Honda CR-V TouringYou will have to kick to the left or right of the receiver on the etrailer.com # e98868 trailer hitch when it's installed on your 2016 Honda CR-V but the hands-free liftgate feature will still work. Even on the newer CR-V models this style of hitch will work and the only time a new sensor kit is needed is when the trailer hitch crosstube is hidden behind the bumper. Attached is an installation video as well as the written instructions. If you let me know what you plan on using the trailer...
view full answer...
- Recommended Class III Trailer Hitch For 2014 Honda CR-VYour Honda CR-V has a 1500 lb towing capacity and 150 lb tongue weight capacity. There is really only one scenario I can think of where a class III hitch like the etrailer Trailer Hitch Receiver - Custom Fit - Class III - 2" # e98868 would be required for that tongue weight. That is if you plan to use a certain style of cargo carrier or bike rack. Many of these carriers require a 2 inch hitch, but not all. So if you don't have one, you can significantly lessen your options. If you...
view full answer... - Would Trailer Hitch from 2005 Honda CR-V also Fit 2015 CR-VThere are enough differences between a 2005 and 2015 Honda CR-V that a hitch from one vehicle would not fit the other. So for the 2015 you'd need a new hitch like with the etrailer hitch part # e98868 which fits the 2015 generation.
view full answer... - Trailer Hitch Fit for a 2015 Honda CR-V EXThe etrailer Trailer Hitch Receiver part # e98868 is a confirmed fit for a 2015 Honda CR-V (All Models). Therefore, you won't need to worry about verifying any measurements beforehand. That said, trailer hitch manufactures don't typically release dimensional drawings for proprietary reasons. If you still need specific measurements please let me know and I will see what I can do. If you will be using the trailer hitch for towing then you'll need a trailer wiring harness the T-One Vehicle...
view full answer... - Bike Rack Recommendation for 2016 Honda CR-VThe Hollywood Racks Over the Top bike rack part # HRF2-3 that you referenced comes with hatch anchors which you could use instead of lower hooks since your 2016 Honda CR-V does not have a lower lip to attach to. These are foam anchors that get closed in the hatch to hold the rack instead of hooks. Since hitch mounted options are basically superior in every way that would be what I recommend as your best choice. You get better stability, an easier install, and the rack won't contact the...
view full answer...
- Troubleshooting Installation of etrailer Trailer Hitch Receiver on 2014 Honda CR-VWhen installing the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98868 the flange nuts won't actually touch each other. You can see in the attached installation videos that the u-bolt will be just wide enough to avoid the flanges from touching at all so there won't be any overlapping. If you are experiencing overlapping the u-bolt may have been bent in and will need adjusting. This installs in the exact same way as the Curt # C13119 and I've linked...
view full answer... - Installing Trailer Hitch Receiver with Corroded Weldnuts On 2014 Honda CRV EX-LThe etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98868 is a great hitch that is easy to install when the weldnuts are not corroded. You have done the right steps in using a lubricant and a nylon brush # 814113, but since that isn't working on 2 of the weldnuts, I recommend using a small wire brush as outlined in the instructions being careful not to damage the threads. If that doesn't solve the problem the next option is to use the 10 mm x 1.25...
view full answer... - What Size Bolts Does The etrailer Trailer Hitch Receiver Use?The bolts on the etrailer Trailer Hitch Receiver # e98868 that you mention, are M10-1.25 x 30.
view full answer... - Can Rear Hatch on 2014 Honda CR-V Be Opened with Saris Bones Bike Rack Attached The Saris Bones 2 Bike Carrier # SA805BL that you referenced is a really nice carrier that's confirmed to fit your 2014 Honda CR-V, however even with the bikes unloaded you won't be able to open the rear hatch without completely removing the rack. This is because the upper straps are going to clip around the top seam where the roof meets the hatch, and opening the rear will cause this connection to loosen up and reduce the tension on the carrier, likely causing it to move around and possibly...
view full answer...
- Can You Carry a Motorcycle On the Back Of a 2015 Honda CR-VThe class III trailer hitch options which are the highest available for a 2015 Honda CR-V such as the etrailer Trailer Hitch Receiver part # e98868 which is what I recommend have a 3,500 lb gross trailer weight rating and a 350 lb tongue weight rating. That said, the 2015 Honda CR-V is only rated for 1,500 lb gross trailer weight and 150 lbs tongue weight. In regards to towing/hauling, you are always limited by your weakest rated component which in case is the vehicle so that you limit....
view full answer... - Can Hollywood Racks RV Rider be Used in Passenger Vehicle HitchYou can use the Hollywood Racks RV Rider part # HLY64FR with the etrailer Class III hitch part # e98868 hitch you referenced. While this hitch is rated for use in RV hitches you can use it in standard vehicle hitches like the # e98868 you mentioned.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Hayden R
Test Fit:
Shane H
Test Fit:
Robert C
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Wilson B
Video by:
Jonathan Y
Video by:
Michael B
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
One-person V.
3/11/2024
After 1 year the product is still working fine. Im happy, no issues