Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
Item # C15323
Retail:$540.95
Our Price: $324.55
You Save: $216.40
Confirmed to Fit
2003 GMC Sierra
1500
2500 LD
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (200)
- Q & A (0)
- Photos
2003 GMC Sierra - Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- 2 Inch Hitch
- Class V
- 16000
- Visible Cross Tube
- CURT
- 2400
- 17000 lbs WD GTW
- 2400 lbs WD TW
- Custom Fit Hitch
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your GMC Sierra's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 16,000 lbs
- Maximum GTW when used with weight distribution: 17,000 lbs
- Maximum tongue weight: 2,400 lbs
- Maximum TW when used with weight distribution: 2,400 lbs
- Maximum gross trailer weight: 16,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
15323 CURT Trailer Hitch Receiver - Custom Fit - Class V Xtra Duty- 2"
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
2,400 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
17,000 lbs.
Tongue Weight (TW):
2,400 lbs.
Gross Towing Weight (GTW):
16,000 lbs.
Tongue Weight (TW):
2,400 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
17,000 lbs.
Tongue Weight (TW):
2,400 lbs.
Tech Tip
No drilling required for installation , Spare tire will need to be lowered or removed temporarily for hitch installation , Requires factory bumper for installation
Complete Towing Package for 2003 GMC Sierra
Retail:$703.81
Package Price:$435.69
2003 GMC Sierra Owners Who Purchased This Trailer Hitch Also Bought...
Popular Sierra Trailer Hitch Accessories
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" - C15323
Average Customer Rating: 4.8 out of 5 stars (200 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Alan11/28/2022
2007 Chevrolet Silverado 1500
Hitch is very heavy duty but seemed to have been delivered by Ace Ventura. Was very scratched up. Hitch bolted right up on a 2007 GMC 1500 HD. The height of the hitch exactly matched the original. Spare tire does not need to be removed. Per the instructions, you are supposed to re-use the existing aft most frame bolts. Be aware that if you use those, they only engage the weld nut by 3/16 of an inch. That is short of fully maximizing the weld nut. Ideally, the bolt threads should go all the way thru the weld nut plus about 2 threads. I replaced those aft bolts with longer ones that fully engage the weld nut. Since the new hitch does not attach to the bumper, I fabbed a custom Z bracket, using 2 pieces of angle iron, to help carry the load. The light plug assy needed to also be modified. The factory angle is 90 degrees, but the wire harness would bot engage the plug assy. I modified the plug bracket as can be seen in the photos.
by: Jason 04/13/2024
Chevrolet
I bought this for my 02 Chevy 1500HD. It bolted on perfectly and is ideal for pulling heavier loads. I’ve pulled max payload loads for the truck with this new hitch and it has worked with no trouble. Would suggest to anyone.
by: Jason10/10/2022
Website said it would fit perfectly for my 2004 Chevy 2500HD. It did not. I had no option to return as I needed to tow the following day so had to work into the night to customize it which therefore I wouldn’t be able to return. I had to use a torch to cut a section out of both sides on the hitch to have it fit around the spring shackle and had to use the torch to make a new bolt hole in the frame closest to the front for that bolt hole. Also drops the receiver an inch lower than the factory height. Was not at all happy but was thankful I had the tools to make it work. Worst thing I hate is that it’s dropped lower than the stock receiver height.
Katrina B.
10/18/2022
I am sorry to hear that this hitch did not fit your application. I see that this hitch is not a confirmed fit for any of the Chevy HDs. This is only a confirmed fit for the Chevy 2500LD and 1500.
by: Michael 05/15/2024
always a good experience with etrailer, thats why i come back.
by: Dan 02/03/2024
The trailer hitch is great simple installation but I had to change hooks on my chain from my trailer other than that top notch
by: Seabee John07/01/2023
2011 Chevrolet Silverado
Went on my 2011 Silverado LT without removing spare tire.
by: Tammy 03/06/2024
this is a way better hitch than class 3 hitch I relaced after 23 years.
by: Denise11/29/2023
It's well made and installation was pretty simple. Nice early x-mas present!
by: Sidney 04/17/2024
2011 GMCSierra
Fit perfectly on my 2011 GMC 1500 Sierra SLE Fast shipping great customer service I have never had any problem with any thing I have ordered from ETrailer Great company to do business with Thanks
by: Kim12/14/2023
2014 Chevrolet Silverado 1500
Clear simple instructions, went on quick and easy. Looks good and feels sturdy.
by: Dale T03/17/2024
Very well made and very fast shipping!!! I would definitely recommend also use etrailer again !!!
by: Kurt04/26/2024
Mack Trucks
I brought this to my local garage to install it, and they were amazed at the quality. They wondered if I was going to start to haul Mack trucks around or what? It has had zero defects all the holes lined up perfectly to my truck.
by: Scott 05/25/2024
Great however had to sell truck as frame gave out
by: Gary K04/14/2020
2012 GMCSierra
Great price, quick shipping even with the pandemic going on. Had a little trouble installing this heavy duty hitch by myself but went on very easy with no issues.
I have not pulled anything yet, but don't expect any issues with this 16k rating on a 1/2 ton truck.
Gary M.
4/15/2021
No issues at all. Great product and company to purchase from.
by: StJulian09/17/2017
2013 Chevrolet Silverado
Shipment was quick.After getting the a socket deep enough to remove the old bolts from the light duty hitch on my 2013 Silverado, The installation was straight forward and simple with the help of my wife and son. Thanks etrailer.
Stjulian
9/18/2018
Awesome. Still hold strong after 1 year. Handles heavy loads without issues. Still please with this purchase and the easy of installation.
by: Glen12/01/2018
2005 GMCSierra
This is a heavy duty 2" receiver trailer hitch (C1523). The 3/8" steel it is made of is the way to go. Aside from the capacity of the hitch one really great features is that the safety chain hook holes are large enough for 3/8" clevis slip hooks. Most hitches don't seem to have holes that are too small.
by: 02/01/2024
Only problem with this kit is the attaching screws. They were usless. I ended up thru bolting with bolts and nuts.
by: Eric04/24/2020
2011 GMCSierra
This is an excellent upgrade to the OEM hitch. Installation was easy and the spare tire can remain in it's original location.
Eric
4/25/2021
The hitch is solid. Tow my 18 deck trailer and 16 dump trailer with no worries. Very nice product.
by: Brent12/05/2017
Ford
I had purchased a 2006 gmc savanna Thomas short bus and needed a hitch for it. The frame was not a normal savanna width. Searching the etrailer site I found drawings of a hitch I believed would work. I needed to enlarge 2 holes to 5/8inch, clean up 2 1/2 inch holes, and drill 2. 1/2 inch holes. In the end I spent more time running to store to get a needed drill bit. The hitch was installed in less then an hour. This was my 2nd hitch from etrailer the last one went on a Ford e350. Had it on in 20 minutes with my sons help. Both hitches purchased were over kill but the xtra capacity is nothing but piece of mind.
by: Stephen05/26/2022
Does the job. Pretty easy to install, other than somewhat heavy (needed a spare set of hands). Had to drop down spare tire to get the hitch up. Even then, spare tire is still touching hitch (tight fit).
by: Stephen 03/22/2024
Fast delivery on a great hitch
by: Scot01/14/2021
2007 Chevrolet Silverado New Body
Bought this hitch receiver to replace the old rusted out factory hitch receiver. Bolted right up with no need to drop the spare tire. The differences between this hitch receiver and the factory one are night and day. This thing is solid. My truck will pull apart before this receiver hitch fails. Way overkill for my needs, but I will never worry about a receiver hitch failure!
by: Kerwin 05/23/2024
Very fast delivery.
by: Colin07/31/2020
2010 Chevrolet Silverado
Very happy with this. Truly bolt on installation without having to modify anything. Definitely seems much stronger than the factory hitch. Its pretty heavy and awkward to do by yourself but its manageable. It took me roughly 20 minutes from start to finish. I no longer have to worry about my hitch while towing.
by: Tyler05/25/2023
Bolted right up to my 09 Chevy Silverado 1500 LTZ. Thank you
25
200
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch that Fits Right Under the Bumper on a 2009 GMC Sierra 1500Yes. The "C" in front of the part number, # C15323, is just how we designate it as a Curt part. The Class IV and V trailer hitches available for your 2009 GMC Sierra 1500 all set at approximately the same location. That is to say with a minimal, if any, gap between the receiver and the bumper. The Class III hitch # 13322 sits up tighter against the bumper, see the linked video, but as a Class III it isn't rated as high as a IV or V. The higher Class hitches are beefier so they may need...
view full answer... - Highest Rated Trailer Hitch For 2009 Chevy Silverado 1500 and WiringI do have an option for you but the Curt Trailer Hitch Receiver part # C15312 is not a fit for the 1500 model. I recommend the Curt Trailer Hitch Receiver Class V part # C15323 for the 2009 Chevy Silverado 1500, which will still give you the 2,400 lb tongue weight capacity you are looking for. This is the highest rated hitch available for the 1500. If your Chevy has a 10 inch deep drop bumper you would only be able to use Curt Trailer Hitch Receiver part # 13339 which is a Class III hitch...
view full answer... - Hitch Receiver for 2001 Chevy Silverado with Roll Pan Bumper That Does Not Use License Plate HoleYou are correct. For the 2001 Chevy Silverado 1500, the Curt # 13932 is the only available hitch that can be used with the roll pan bumper. If you wanted to use one of the hitches designed to circumvent the deep drop bumpers that were often found on this model you could use the Curt # 13339. However, this is still a Class III hitch receiver, so it would not increase your towing capacity and there is not anything for use with an aftermarket roll pan bumper that is higher rated than that....
view full answer...
- Hitch and Weight Distribution System Recommendation for a 2014 Silverado 1500In a towing setup you always have to use the lowest rated component as the overall towing capacity. The Curt Hitch part # C15323 that you referenced has much higher capacities than what your vehicle has. All that means is that the hitch portion of your setup wouldn't fail if you went above your capacity, but your vehicle would most likely. If the max capacity with weight distribution for your vehicle is 1,200 lb tongue weight and 12,000 total weight that is the max you could do with this...
view full answer... - Curt Hitch # C15323 Compatibility with 2009 GMC Denali AWD with Towing Package The Class V Curt Trailer Hitch Receiver # C15323 is confirmed to fit the 2009 GMC Sierra Denali. This Class V hitch has a maximum gross trailer weight capacity of 16,000 lbs. Keep in mind, however, that your towing capacity will be limited by the capacity of your vehicle, which you can confirm in your owner's manual. Always abide by the lowest rated component of your towing setup. Also note that the ball mount, pin, and clip for this hitch are sold separately. For your convenience, I've...
view full answer... - Does the Curt Class IV Receiver Hitch Fit a 2009 Chevy Silverado 1500We do have a trailer hitch to fit your 2009 Chevrolet Silverado 1500, but the Curt # 14211 is not a fit. As you pointed out, this will fit the 2500 6-1/2 and 8 foot bed as well as 3500 pickup models. Instead, hitch # C15323 will fit the 1500 and is designed for heavy-duty towing. I have attached a video of an installation on a 2010 Silverado that you may use for reference.
view full answer... - High Capacity Trailer Hitch Recommendation for a 2006 Chevy Silverado 1500The highest capacity 2 inch hitch we offer for your 2006 Chevy Silverado is the Curt Hitch part # C15323 which has a 2,400 lb tongue weight capacity and 17,000 lb total trailer weight capacity. I attached an install video for this hitch for you to check out as well. Your stock trailer wiring setup connects to a harness behind the rear bumper and would not be affected by the hitch. It installs by twisting into the socket.
view full answer...
- Recommended Ladder Rack, Trailer Hitch Receiver, And Truck Bed Extender For 2013 Chevrolet SilveradoFor your 2013 Chevrolet Silverado, the Truck Bed Extender # BX4004-02 , is a confirmed fit. It will allow you to store this extender allowing you full bed access and will give you the extra 28 inches of space. For a trailer hitch, I recommend the Curt Trailer Hitch Receiver Class V XD - 2", # C15323. This is a custom fit for your vehicle and is made in the USA. There is no drilling required for installation, but the spare tire will need to be lowered or removed temporarily for installation....
view full answer... - Trailer Hitch Compatibility with 2008 Ford E-450 FrameI reached out to my contact at Curt and they don't have a confirmed fit for the E450 (because there are a few different frames) but he did give me some suggestions that have worked for others. If you have bolt holes that are 38-5/8 inches from frame to frame, then the Curt # 14055 will work. If you have the standard 42 inch frame the # C15323 has slotted holes that are 39-1/8 inches on center. Finally if you have the 34 inch frame that is common on the cab and chassis models then # C14082...
view full answer... - Curt Hitch Recommendation for a 2002 GMC SierraYes, the Curt Hitch part # C15323 that you referenced is confirmed to fit your 2002 GMC 1500HD. To complete your towing setup you may also be interested in the following products: etrailer.com Ball Mount Kit part # EBMK2416. This provides you with a ball mount and two different hitch ball sizes plus a pin and clip.
view full answer... - Trailer Hitch Receiver for 2005 Chevrolet Silverado 1500HDThe Draw-Tite Ultra Frame Trailer Hitch Receiver # 41944 is not confirmed to fit on your 2005 Chevrolet 1500HD, it will only fit the 2500HD and 3500HD models. For your Silverado 1500HD I recommend the Curt Trailer Hitch Receiver # C15323. It has a maximum trailer weight of 16,000lbs or 17,000 with weight distribution hitch and 2,400lbs of tongue weight. This will not allow you to carry more than what your truck is rated for. I recommend contacting your dealer with your vin number for...
view full answer... - Trailer Hitch Recommendation for 2013 Chevy Silverado 1500 Towing Imagine XLS MLE22Unless you were using a weight distribution system like the Strait Line part # RP66083 with the Draw Tite hitch part # 75521 it would not have the capacity for the Imagine XLS MLE22 based on the unloaded weight you mentioned. Without a WD system the hitch has a 6k trailer weight capacity so by the time your trailer is loaded it would probably weight more than that. With a WD system it has a capacity of 10,500 lbs. The Curt hitch part # C15323 has a higher capacity at 16,000 lbs without...
view full answer... - Will the Curt Class V Trailer Hitch # C15323 Fit a 2008 Chevrolet Silverado 1500 Crew Cab Short BedYes, according to Curt, the Curt Class V Trailer Hitch, # C15323, will fit your 2008 Chevrolet Silverado 1500 Crew Cab short bed. This hitch will not use the same bumper attachment as the factory hitch, so you will not need to worry about the height difference from the lift kit. I have attached the installation instructions for this hitch as well as an installation video on a 2008 Silverado for you to check out. Keep in mind, this hitch will not increase the towing capacity of your truck....
view full answer... - Curt Class V Hitch Recommendation for a 2012 Chevy Silverado 1500 4x4The Curt Class V Hitch part # C15323 that you referenced has been confirmed by Curt to fit your 2012 Chevy Silverado 1500 4x4, crew cab, short bed truck. This hitch should work well for you. I attached installation instructions for you to check out. Most likely you have trailer wiring, but if yours is damaged you would want the Pollak 7-Way part # PK11916. I attached an install video for this product. For a ball mount, hitch ball, and pin and clip, I would recommend the etrailer Ball...
view full answer... - Availability of Class IV and Class V Trailer Hitches for a 2003 GMC Sierra 1500There are a few different options to choose from depending on the style of 2003 GMC Sierra 1500 HD that you have. If you have a 10 inch Deep Drop Bumper I recommend the Curt # 13339. If you have the aftermarket Roll Pan Bumper I recommend the Curt # 13932. If you have a factory bumper then I recommend the Curt # C15323. The first 2 options are have 2 inch receiver openings but only have Class III ratings and are the only options for those styles of Sierra 1500 HDs. The 3rd option is...
view full answer... - Will Curt Trailer Hitch 15322 Fit a 2002 Chevy Silverado 1500HDThe instructions for Curt trailer hitch # C15323 do not specify light duty 1500 models or HD models. So I called my contact at Curt and he said that it WILL FIT the HD models as well so you are good to go. I also recommend etrailer ball mount kit # EBMK2416. It comes with 2 balls, a ball mount, hitch pin with clip, and storage bag.
view full answer... - Recommended Frame-Mount Trailer Hitch for Winnebago MotorhomeWe offer two adjustable-width frame-mount hitches for your Winnebago that has a 31-inch frame spread. Curt 2-inch hitch # 13703 can be bolted or welded on a frame from 22- to 72-inches wide. It offers a 350-lb tongue weight capacity. This item fits on box frame, C-channel frame, or I-beam frame RVs. This is a Class III hitch; no class IV hitches are available in this universal-fit type. For a higher-capacity option Curt offers hitch # C13701, also a 2-inch Class III type, that offers...
view full answer... - Trailer Hitch that Fits Right Beneath Bumper on a Lowered 2008 Chevy Silverado 1500Curt trailer hitch # 13322 has the receiver right below the bumper. Take a look at the video I have linked showing a typical installation for you. You can see that once installed the hitch receiver will be directly below the rear bumper. This is a 2 inch hitch rated for 600 pounds tongue weight and 6,000 pounds gross trailer weight. For a higher capacity we have # C15323 that also fits below the bumper. It is rated for 2,400/16,000 pounds. I have linked a video showing installation of...
view full answer... - Towing Capacity for Curt Hitch C15323The towing capacity of the Curt hitch part # C15323 is 16,000 lbs with a tongue weight capacity of 2,400 lbs. Your vehicle most likely has lower towing capacities than that so you'd need to go by the lower vehicle capacities as the overall capacity.
view full answer... - Trailer Hitch Fits for 2006 Chevrolet Silverado Classic Z71The 2006 model year Chevy trucks were a split model year (C/K Series and Silverado). To select the correct Curt Class IV hitch for your truck you can use the linked page to choose your Vehicle Style. Use the drop-down menu tool to choose your specific configuration. For the standard 1500 use Curt # C14332. For the 1500 with 10-inch deep-drop bumper use Curt # 13339 (Class III). If the 1500 has an aftermarket Roll Pan Bumper use # 13932 (also Class III). If you have a different version...
view full answer... - Difference Between Curt Class V Hitches # C15322 and # C15323 For 2008 Chevy SilveradoBasically the part # C15323 replaced the # C15322 which is now no longer available.
view full answer... - High Capacity Trailer Hitch for a 2013 Chevy Silverado 1500 that Sits Tight to Rear BumperThe hitch opening of both Curt hitches you mentioned are going to sit right under the bumper of your 2013 Chevy Silverado. Check out the picture I attached that shows the # C15323 installed on a truck like yours. I attached an install video for you to check out as well. Be sure you don't exceed the towing capacity of your truck that is stated in the owners manual as well.
view full answer...
- Does C15323 Fit Both the 2003 GMC Sierra 1500 And The 2007 GMC Sierra 1500 ClassicFrom your photos it looks like you have the Class V Curt Hitch part # C15323 for the 2003 Sierra 1500. The Curt Trailer hitch part # C15323 fits both the 2003 GMC Sierra 1500 and the 2007 GMC Sierra 1500 Classic so you can use this hitch on your newer Sierra. However, I highly recommend to change the hardware with part # RHK. Go to the product page and put in hitch number C15323 to order new hardware because the bolts are one time use.
view full answer... - Trailer Hitch for 2002 Chevy Silverado 2500 LD That Doesn't Attach To BumperThe Curt # C15323 installs to the underside of the frame members as shown in the provided diagram. You'll want to make sure the rear frame members where the hitch would install are still sound. Some surface rust is normal, but if it's any worse than that I wouldn't recommend towing with that vehicle. I've linked to an install video that you might find helpful.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Andrew S
Test Fit:
Shane H
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Chris R
Video by:
Andrew K
Video by:
Joshua S
Video by:
Alan C
Video by:
Zach D
Written by:
Adele M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Alan
11/29/2023
Product is alright. As stated in other reviews, the cut outs for the safety chain hooks are poorly designed.