Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Item # 14001
Retail:$386.95
Our Price: $245.25
You Save: $141.70
Confirmed to Fit
1993 Ford F-250 and F-350
Pickup - Standard or Step Bumper
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (241)
- Q & A (0)
- Photos
1993 Ford F-250 and F-350 - Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- 2 Inch Hitch
- Class IV
- 10000
- Concealed Cross Tube
- CURT
- 1000
- 12000 lbs WD GTW
- 1200 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Ford F-250 and F-350's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class IV
- Maximum gross trailer weight: 10,000 lbs
- Maximum GTW when used with weight distribution: 12,000 lbs
- Maximum tongue weight: 1,000 lbs
- Maximum TW when used with weight distribution: 1,200 lbs
- Maximum gross trailer weight: 10,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
14001 Curt Class 4 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
12,000 lbs.
Tongue Weight (TW):
1,200 lbs.
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
12,000 lbs.
Tongue Weight (TW):
1,200 lbs.
Tech Tip
Spare tire may need to be repositioned. Drilling required for installation , Does not fit models with rollpan bumper , Spare tire will need to be lowered or removed temporarily for hitch installation , Does not fit Cab and Chassis or vehicles with 34 inch frame
Complete Towing Package for 1993 Ford F-250 and F-350
Retail:$555.57
Package Price:$356.52
1993 Ford F-250 and F-350 Owners Who Purchased This Trailer Hitch Also Bought...
Popular F-250 and F-350 Trailer Hitch Accessories
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 14001
Average Customer Rating: 4.8 out of 5 stars (241 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Eric02/24/2023
The packaging was solid and so was the fast delivery. Good fit only a couple of modifications to miss one of the factory rivets. Pushed to one side Against the leave spring bracket the hole used to miss the rivet fell in line with the rolled ninty of the hitch. A grinder and cutoff wheel did the trick. I would have to drop my gas tank down out of the way if I want to through bolt the rest of the hitch plate. The edge of the tank is in line and next to the frame. I'm thinking on drilling and taping and using some lock tight and call it good. It was fairly easy to install once you tie one end up and then hold the other end and mark your holes with a sharper. Through bolt the side you just drilled and then repeat. Very well fabricated I would recommend this style of hitch to anyone.
by: Ben02/15/2020
1973 Ford F-100, F-150, F-250, F-350
Installed on a 1973 Ford F-250 with 37-3/4" frame. Installation was straight forward. Product fit well. I put the second hole on the last riveted frame cross member, everything lined up perfectly. Make sure to allow enough room for the washers on top of the frame rail, I had to use a die grinder to open up one hole because I made the hole too close to the frame and could not get the washer to sit on the frame rail. A second person and C - Clamps helped a lot. We lifted the receiver into position, clamped it in place. I drilled one hole on each side, installed the bolts, then removed the clamps and drilled/installed the rest of the hardware. Contrary to the instructions, I did not have to remove my spare tire (thank Jesus!).
Great product, shipped fast. This is my third Curt hitch and one of many times I've used etrailer.
by: Tony07/05/2021
1993 Ford Bronco
This hitch appears very well make and was fairly easy to install on my Bronco. Even at 70 I had no issues and it took about an hour at a slow pace. First thing I did was wire it to a floor jack and jack it in place to mark the holes, step drilled as recommended and fished the bolts through as is necessary on the Bronco due to the fuel tank position. I didn't see any Bronco install pic here so here are a couple of pics. Very similar to the F150 type install except for the fuel tank.
Tony
7/6/2022
Still secure and working exceptionally well.
by: Dean 05/12/2024
Product arrived earlier than expected and install instructions were perfect. Great. Alue
by: Michael L10/16/2023
This hitch was the perfect replacement for my truck, Great product and service ,the price was very fair. I received my new hitch and had it back on the truck in a day, would recommend etrailer to everyone and will use again if needed in the future.....
by: Noe 03/16/2024
1999 Dodge Ram Pickup
Fits perfect on my 1999 Dodge Ram 1500 and easy to install.
by: Michael 09/18/2023
Installed Curt hitch class 4 2” and after a year here in Mn still has a gloss finish on black paint. Well made and installed fairly easily and had all hardware required.
by: Derek10/25/2023
Fitment wasnt perfect it was a little narrow for my frame but still bolted up and has hauled good, no problems, was put in a 1995 f150 4.9 rwd 5 speed single cab long bed
by: William Mayhew 10/11/2019
The product was an easy install just as they said. The wiring was also simple to install. It works perfectly and also increases the value of my truck because it’s equipped to haul trailers or campers with an taillight / brake lights hook up.
I was very impressed with this and will definitely contact etrailer again if I need anything else.
by: Ron11/27/2018
Ram 3500
I'm 75 years old and not getting around like I used to. The Curt class IV hitch aligned perfectly with frame existing holes. Center hole needed to be drilled, easy enough to do. The existing 3500 lb.bumper hitch was removed. Some wiring was attached to frame and needed to be relocated. My son stopped by to help with installation, but we found a floor jack could be used to position hitch without need for extra muscle. Once lifted, we used clamps to hold in place for hole enlargement and drilling. Looks like it will tow much more than truck is certified to pull
by: Scot05/02/2020
1977 Ford F-100, F-150, F-250, F-350
Fit my 1977 Ford F250 Super Cab Camper Special with step bumper. The guide holes fit right over the rivets on the frame rails. Leaves adequate room for my spare tire to continue to be carried by the undermount system. Just what I was looking for. Still mulling over where and how to place my trailer wiring receptacle. Might put a six-pin round in the left license plate light hole.
by: timothy02/02/2021
It was indeed a perfect match to my F-350's rear end. It tows large trailers well, and as of last month, survived a rear-end colission "without a hitch," pardon the pun. It is still perfectly straight. Good product!
by: Cameron07/24/2021
Product quality is exactly like every other Curt part, no problems. Packaging and shipping from etrailer was lacking. Albeit quick, but the product was outside the box on my doorstep. Hitches get beat up and rusty over time so not worth complaining, but still a bit disappointing.
by: George B.06/05/2012
1980 Ford F-150
I ordered the Curt Trailer Hitch Receiver on the Memorial Day weekend and it was delivered on Friday, the same week. I found the Curt Trailer Hitch Receiver fit my 1980 Ford F150 Pickup without any problems. Other places I checked did not have Trailer Hitch Receivers for vehicles this old. It took a little over an hour to install. The extra time was needed to drill six 1/2" holes in the bottom flange of my truck frame.
by: Mr. Bill03/05/2017
1990 Ford F-150, F-250, F-350
The hitch arrived in 3 days in great condition. Good packaging. My installation took a little longer than most I am sure. My bumper mounts have a "C" shaped cross section that covered the areas on both sides of the frame where toe rear most bolts needed to be installed. Had to remove the bumper.
I have purchased several items from ETrailer over the years. All have been high quality and the prices can't be beat.
I will always dream with etrailer when I need towing components.
by: Kevin08/10/2021
2nd curt hitch I've installed, had it done in 35 minutes. Didn't have to move the spare or rear bumper. Really easy install. Good shopping by etrailer too.
by: Scott02/25/2022
awesome hitch,super easy install,great price.have worked great for towing my car trailer.curt hitchs are the best.
Scott E.
2/26/2023
this hitch is still awesome.would recommend to anyone who needs a quailty hitch.
by: William 11/30/2021
item looks great . It will be quite some time before I will be able to get it installed .First off the truck has a home made hitch welded on it now . I will have to get it off first . My shop is working outside and with winter coming it will take time . I'll try and send you some pictures of the one I have to cut off , And in time send you one with it installed on truck .
Regards
William
12/1/2022
Dont know yet . I have had a few health issues last year . The hitch looks great and in my mind Im sure it will work as it should . Number one is the person that owned the 1985 Ford F350 dually had someone weld a make shift hitch on it , and I will have to grind it off to put this nice hitch on .
by: Deidre04/15/2021
1996 Dodge Ram Pickup
I am Soo happy with how easy this hitch receiver was to install. Everything fit perfectly and was well packaged.
by: Luke03/23/2023
The box was delivered split in half and the hitch hanging out of it. Paint damaged, scratched and missing hardware.
Jenny N.
3/24/2023
Wow, it certainly did not make to you undamaged. I will have our Customer Service team contact you so that it can be replaced.
by: Cesar F. 10/13/2017
Dodge Durango
Arrived on time. Perfect fit. No issues. Will definitely order from you guys again.
Cesar F.
10/18/2018
Works great
by: Troy06/06/2022
Good quality hitch. Fits as it should. Sits low on my lowered truck but does the job.
by: Henry 09/02/2020
2015 Dodge Ram Pickup
The hitch receiver was beautifully finished in gloss black, well made and bolted precisely to my 1994 Dodge Ram 1500. Each of the six bolts enclosed with the receiver, when inserted in the holes in my truck's frame made the receiver absolutely, perfectly aligned. You can be proud of the welds and metal were solid and smooth professional fabrication. Install time took me 1 hour. I spent 15 minutes of the hour balancing the receiver on my floor jack and chaining it to the jack, since I was doing the job by myself. I got the bolts finger tight then applied my 1/2 inch impact wrench with a 3/4 inch socket to finish the job. I would buy this again.
Henry H.
9/6/2021
The hitch continues to meet all my original expectations!
by: Eric 03/01/2023
1973 Ford F-100, F-150, F-250, F-350
Item description was spot on, it shipped immediately, and fit perfectly. I would highly recommend this hitch and equally recommend purchasing it from eTrailer. It looks great on my 1973 Ford F100 and will provide years of utility.
25
241
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Does Same Curt Class IV Hitch Fit 1991 and 1994 Dodge RamThe Curt Class IV hitch part # 14001 does fit your 1994 Dodge Ram 1500. It also does fit a 1991 too since it's the same design! I attached an install video for this hitch on a 1995 Dodge Ram which would be more similar to what you have.
view full answer... - Recommended Trailer Hitch for 1993 Ford F-150The Curt Class IV Receiver Hitch # 14001 referenced in your question is indeed confirmed to fit your 1993 Ford F-150 Pickup if it has a standard or step bumper. I spoke with my contact at Curt and he stated that the 1993 Ford F-150 did not have a model with a factory tube bumper. I recommend verifying the type of bumper that is on your truck to ensure that this will work. If it is an aftermarket item, then this particular hitch is not confirmed to fit. Keep in mind that some drilling...
view full answer...
- Will Curt Trailer Hitch, # 14001 Fit on a 1989 Dodge D250 Pickup With a Cummins Turbo DieselThe Curt Trailer Hitch, # 14001, will fit your 1989 Dodge D250 pickup as long as it does not have a roll pan bumper. I have included a link to a video installation on a similar truck below. I also added a link to the installation instructions. I also recommend the Forged Ball Mount, # 40331, and ball # A-90 (2 inch diameter), or # 19286 (2-5/16 inch diameter). The wiring for your truck is the Curt Vehicle Wiring Harness with 4 Pole Trailer Connector, # C55317. Installation is easy. The...
view full answer... - Receiver Hitch Recommendation for 1993 Ford F150The Curt Class IV Trailer Hitch Receiver, # 14001, is just one of the hitch receivers that has been specially designed to fit a 1993 Ford F150 with a standard or step bumper. This fully welded trailer hitch receiver bolts onto the F150's frame with no welding required. I am including a link to all of the hitches that we have available for a 1993 Ford F-150. Just select your bumper style and you will see a list of the hitches that are available for your truck. Each of those listed will...
view full answer... - Which Trailer Hitches Fit a 1990 Ford F-150We have a number of hitches that could fit your 1990 Ford F-150. I like Curt hitches because of their thicker powder coat compared to other brands. It depends on which frame and which rear bumper your truck has as to which is the correct Curt hitch: Standard or step bumper models use part # 14001 Deep drop bumper models use part # C15511 Cab and chassis models use part # 13028 Also, if you need a 7-way wiring harness you can hardwire in part # 20023. Or if you only need a 4-way you can...
view full answer... - Recommended Trailer Hitch Options for 1995 Ford F350We have many different hitches compatible with your truck. The best choice for you will depend on what you're wanting to tow. For lighter duty towing, I'd recommend the Class III hitch, part # 75038. The hitch has a 5000 lb towing/500 lb tongue weight capacity. For a heavier duty Class IV, the Curt # 14001 with its 10000 lb towing and 1000 lb tongue weight capacity would be a good choice. For a higher capacity, B & W offers a Class V with a 2 inch by 2 inch receiver opening, part # BWHDRH25122...
view full answer... - Recommended Class IV Trailer Hitch Receiver For 1984 Ford F-150For a Class IV trailer hitch receiver on your 1984 Ford F-150, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 14001. This is a bolt on square tube design with a brlack powder coat finish over a protective base coat. If you have a deep drop bumper on your truck, then I recommend the Draw-Tite Trailer Hitch Receiver - Multi Fit - Class IV - 2" # 37130. This deep drop hitch is a bolt-on install with a round-tube design. It is black powdercoat over an e-coat...
view full answer... - Installation Instructions for Curt Trailer Hitch Receiver 14001The instructions for the Curt Trailer Hitch Receiver # 14001 have been attached in a link on this answer page for you to check out the torque specs (they are at the end of the instructions). Normally we try not to post torque specs live just in case there are any changes to hardware down the road that will alter the torque specs. Please note that it's always a good idea to check the instructions that came with your hitch just to make sure everything matches up. This hitch is for older...
view full answer... - High Capacity Trailer Hitch for a 1995 Ford F-150 XLT with Regular Step BumperThe 2 Curt hitches you referenced are not a fit for a 1995 Ford F-150. Hitch # C15845 is for Super/Heavy duty cab and chassis models, not regular pickups, and # C15810 is for F-250 and F-350 models. For your F-150 with the regular step bumper you can use Curt hitch # C15300 or # 14001. I have linked some videos showing how these hitches install.
view full answer... - Recommended Trailer Hitch Receiver For 1995 Ford F-250 W/ 37" Frame For Towing 6000lb TrailerFor your 1995 Ford F-250 with the 37" wide frame I recommend the Curt Trailer Hitch Receiver # 14001 as long as you have the standard bumper, or step bumper. This hitch has a 1000lb tongue weight rating and 10000lb trailer weight rating to accommodate the trailer you mentioned. If you have a deep drop bumper you will need the # BWHDRH25198 which fits your 37" frame perfectly, and has a 1600lb tongue weight rating and 16000lb trailer weight rating. I included videos of the products mentioned...
view full answer... - What is the Highest Rated Trailer Hitch Available for a 1996 Ford BroncoThe highest rated available trailer hitches I can find for a 1996 Ford Bronco are Class IV hitches. We carry the CURT Trailer Hitch, # 14001. This hitch does not fit cab and chassis models or models with a roll pan bumper. It is a Class IV hitch rated for 1,000 pounds tongue weight and 10,000 pounds gross trailer weight, 12,000 pounds when used with weight distribution. I have included a link to the installation instructions. If you plan on doing some towing, I recommend the etrailer Ball...
view full answer... - What Grade Bolts are Used for the Curt Trailer Hitch Receiver # 14001 for a 1999 Dodge Ram PickupThe bolts that are used are Class 5 if they are Silver and Class 8 is they are a Gold color. If you are looking for replacement hardware for your Curt # 14001 Trailer Hitch, you can use the Replacement Hardware Kit, part # RHK. All you need to do is type in your hitch number on the # RHK product page and we will send you the correct replacement hardware.
view full answer... - Trailer Hitch for 2002 Dodge Ram with Ranch Hand Hitch to Sit Flush with BumperWe have spoke with Ranch Hand before about the fit of trailer hitches with their bumpers and they state that since their bumpers are designed to fit with the factory hitches for the vehicles the aftermarket ones would fit as well. The Curt hitch part # 14001 is a fit for your 2002 Dodge Ram and sits about flush with the factory bumper so it would be your best option. Check out the picture I attached for more info.
view full answer...
- Will the Curt Hitch For a 1993 Dodge Ram Fit Models With Roll Pan BumperThe Curt Trailer Hitch Receiver part # 14001 which is a fit for a 1993 Dodge Ram is designed for models with the factory step bumper. That said, it should work just fine with most roll pan bumpers it would just sit down a little further than normal and may look funky but there would be no functional issues.
view full answer... - Does 1986 Ford Pickup Westin Fey Surestep Deluxe XLT Rear Bumper Have a Center PadThe molded polymer plastic step pad on the Westin Fey Surestep Deluxe XLT Rear Bumper # 21007-92230 for your 1986 Ford pickup is designed only for that bumper piece and isn't available to cover up where the hitch ball is meant to be installed. Since you're also needing a hitch receiver with a higher towing weight capacity I recommend checking out the Curt Trailer Hitch Receiver # 14001 which has up to 10K towing and 1K tongue weight ratings, plus the crosstube is hidden for a cleaner-looking...
view full answer... - Recommended Trailer Hitch Receiver for 1994 Dodge Ram Cab and ChassisThe Curt Trailer Hitch Receiver # 14001 fits the pickup model of the 1994 Dodge Ram. All of the available custom fit hitches are going to be for the pickup truck, which means you will need to use a universal hitch for the cab and chassis. I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41990-07 with a 7" drop or # 41990-16 with a 16" drop. These require a weld-on installation so you will want to make sure to have a certified welder install...
view full answer... - Installing Curt Class IV Receiver Hitch # 14001 on 1995 Ford Bronco with 3 Inch LiftIf the lift kit does not interfere with or obstruct the bottom of the frame members where the hitch attaches to the vehicle, the fact that your Bronco is lifted should in no way affect the hitch installation. Due to the lift, you will need to choose a ball mount that places the trailer ball at the correct height so that your trailer is level when towed. I will link you to our ball mount FAQ article that shows how to measure for the correct rise or drop needed. I have also linked you to...
view full answer... - How Does the Curt Trailer Hitch Attach to a 1989 Ford BroncoThe fact that you do not have holes on the frame of your 1989 Ford Bronco is not a problem. You will drill holes into the frame to install this Curt Hitch # 14001 on your vehicle. The location of your spare tire will not be a problem either, check out the installation instructions I attached that show how it installs. I also attached an installation video for this hitch for you to check out. At most you have to reposition your spare tire, but that would be the worst case scenario. To...
view full answer... - Will the Curt Class IV Hitch # 14001 fit on a 1978 Ford F-350 with a 34 Inch Wide FrameThe Curt Class IV Receiver Hitch, # 14001 is designed to fit the wider framed 1978 Ford F-350 trucks, and will not fit on the 34 inch wide framed cab and chassis models. I went out to the warehouse and measured the Curt hitch, # 14001 and the installation holes are 36 inches apart on center, see attached photo. The correct Curt Class IV Receiver Hitch for your 1978 Ford F-350 is part # C14082, which is designed to fit the cab and chassis models with narrower 34 inch frame, see instructions...
view full answer...
- Compatibility of Thule # TH903202 EasyFold XT Bike Rack with 1999 Dodge Ram PickupThe Thule EasyFold XT # TH903202 bike rack would be a good choice if your bike weighs 65 lbs or less, and your Dodge Ram is equipped with a trailer hitch. If you don't have a hitch already, you can install one using part # 14001. The EasyFold has an overall capacity of 130 lbs, but Thule doesn't recommend putting a single bike on it that weighs more than 65 lbs. Some electric bikes would allow you to remove the battery pack, which would save some weight. If your bike weighs more than 65...
view full answer... - Replacement Hardware Kit For Curt Trailer Hitch Receiver # 14001To replace all the mounting hardware for the Curt Trailer Hitch Receiver # 14001 you will need to order the Replacement Hardware Kit # RHK. You will need to input your hitch number into the box before placing the order to ensure you get the correct hardware.
view full answer... - Hitch Recommendation for a 1995 Ford F-150 So that Ball Mount Can be Used to Tow Trailer LevelIf you have a bumper hitch ball on your truck that is too high for your trailer to be towed level you would want to install a frame mounted hitch like the part # 14001 so that you can use a ball mount to allow the trailer to be towed level. This hitch is confirmed as a fit for your vehicle and would work well. I attached a help article on how to pick out a ball mount with the right rise/drop to allow your trailer to be towed level as well.
view full answer... - Can I Keep My Spare Tire Mounted With The Curt Trailer Hitch Receiver # 14001 On 1997 Ford F-250I contacted our representative at Curt and he informed me that you will be able to keep your spare tire on your 1997 Ford F-250 extended cab long bed with rear full tank, with the Curt Trailer Hitch Receiver, part # 14001. When installing part # 14001, you will need to lower the spare tire to install the Curt Hitch. After installation you will just need to raise the spare tire and position it into place. To complete your towing setup, you may be interested in the following items: Draw-Tite...
view full answer... - Does Curt Hitch Fit 1995 Ford F-150 With 38 Gallon Gas TankThe Curt Trailer Hitch Receiver # 14001 for your 1995 Ford F-150 is only designed to fit the stock truck. I looked and could not find if the 38 gallon oversized tank was OEM or an OEM option, so if it is aftermarket, I can't guarantee a fit for the # 14001. That said, if you take a look at the accompanying photo of the # 14001 on an F-150 you can see where it installs, and so long as your oversized gas tank is not interfering where it attaches to the frame it will fit. Note that the hitch...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Sarah H
Video Edited:
Zack K
Video Edited:
Joshua S
Video by:
Andrew K
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ben
2/16/2021
After a year and several 10,000 tows. Still going strong and the finish is holding up nicely.