etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e98849
Retail:$264.87
Our Price: $182.93
You Save: $81.94
Confirmed to Fit
2007 Chevrolet Silverado New Body
1500
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1212)
- Q & A (0)
- Photos
- Used (1)
2007 Chevrolet Silverado New Body - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- 2 Inch Hitch
- Class III
- 6000
- Visible Cross Tube
- etrailer
- 600
- 10000 lbs WD GTW
- 1000 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Chevrolet Silverado New Body's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 10,000 lbs
- Maximum tongue weight: 600 lbs
- Maximum TW when used with weight distribution: 1,000 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e98849 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Tech Tip
Product not intended for vehicles with roll pan bumper, Tommy Gate lift, or 10" drop bumper. No drilling required for installation , Trimming of the fascia may be required for hitch installation. Check fit first, per instructions, to see if necessary
Complete Towing Package for 2007 Chevrolet Silverado New Body
Retail:$332.02
Package Price:$238.31
2007 Chevrolet Silverado New Body Owners Who Purchased This Trailer Hitch Also Bought...
Popular Silverado New Body Trailer Hitch Accessories
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98849
Average Customer Rating: 4.8 out of 5 stars (1212 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.by: Scott04/27/2023
It's an exact fit. I was able to install it on my own in 20 minutes. It is heavy, so be prepared to have a freind nearby because most of the struggle you'll have is threading the bolts, but my tip is to get one started under the bumper, then move on and repeat that until they're all started, then proceed to tighten it all down.
DO NOT FORGET to torque them down after tightening.
The picture I uploaded with this review shows it looks totally stock.
I absolutely recommend this hitch, eTrailer had the best price both for the hitch itself, AND for shipping.
by: Karl04/12/2023
2009 GMC Sierra
The hitch is great, nice construction and perfect fit. All of the necessary hardware was included.
Karl
4/13/2024
I am still happy with the hitch, what really made the difference for me was the hardware included, it really made installation easy.
by: Wayne11/10/2022
Got both items in 3 days and they went on without a "hitch". The trailer connector socket is very easy to install also! They both look awesone!!
Wayne
11/11/2023
Product is performing as expected, no issues at all.
Mike L.
11/17/2023
@Wayne That's great, thank you!
by: George M.03/09/2023
Literally took the old one off in 12 minutes and installed this one in less than 7 minutes perfect fit.
George M.
3/10/2024
Been a year and its still just like new no problems at all sure glad I made this purchase
by: Douglas 05/12/2023
2007 Chevrolet Silverado Classic
The hitch lines up with the underbody frame, but not with the mounting holes under my new bumper. Need to find a way to make it fit under the bumper. Any suggestions are welcome.
Douglas
5/13/2024
Really nice product.
by: Milton06/01/2024
2011 Chevrolet Silverado
Perfect fit for my 2011 silverado new hardware, product quality is pristine, honestly looks original beside the fact the original one used 3 bolts on the frame this only uses 2 not complaining at all would definitely recommend to everyone
by: Rob B06/04/2022
2008 Chevrolet Silverado
The hitch receiver that I ordered was in stock and arrived at my house quicker than I expected. Removing the old hitch and installing the new one took about half an hour. The included hardware worked perfectly.
Rob B.
6/5/2023
Ive been using this hitch for about a year and it has lived up to my expectations. The safety chain holes are big enough for my chain hooks to hook in them easily. My original equipment hitch was difficult to hook them into.
by: Christian 03/21/2024
2013 Chevrolet Silverado
After 1 year of ownership I am very happy. Does its job. Simple to set up with wrenches and came with instructions in case. They also make videos for YouTube certified mechanics. Have pulled upwards of the tow capacity rated for my truck with no issues whatsoever. Great coat of paint no cracking or surface rust yet. Quick shipping, e trailer takes their business seriously.
Probably one of the best upgrades I’ve made for my truck aside from the add-on reverse/rear camera kit that I also purchased here. Can’t say enough good things about this company. If I need something else I will come here first. 11/10
by: James10/24/2023
The class 3 hitch is very nice. Beautiful welds and finish. Very solid and heavy duty. I'm really happy with the hitch.
The issue I had was I'm a DIY'er, emphasis on the "Y". So when it came time to install, I found myself under the truck, holding he hitch up with my knees as I fumbled around trying to get a new bolt into the welded on nut. I ended up using the original bolts to secure the hitch, then swapped the old bolts out for the new one by one.
The reason this worked was a chamfer on the old bolt. Made it very easy to find the threads and start the bolt. Attached is a picture. Overall the bolt looks pretty good after being under the truck for 15 years.
As I said the hitch itself is well made and I am very satisfied with what I bought. Maybe you can consider a slightly different bolt.
by: Charles01/25/2024
2006 Chevrolet Silverado
Great products and customer service if I ever need anything for my truck or trailers this is where I will be had to replace my old receiver off my 06 silverdo couldn't hav been easier
by: Tony04/07/2024
2013 GMC Sierra
Well Etrailer did excellent job, correct product good fit and quality for the price (all though when I looked at just a 6 bolt pattern I was double checking the order an confirm with the invoice and read the hardware instructions this is what is used on a class III 2" hitch ) , all hardware included , easy to follow directions and very fast shipping (bonus free shipping on this item ) this hitch went on my 2013 GMC Sierra " without a hitch" the rest is up to you, invest in some good rust penetrating spray apply 24hrs before and good luck
by: Michael05/09/2024
I ordered a hitch for 2012 Chevy Silverado 1500 and you send a hitch that fits Toyota …. I have already took the old hitch down and now I go without a hitch … thanks for noticing
Jenny N.
5/15/2024
Michael, I am sorry about shipping the incorrect hitch to you. We will have the correct one sent for your 2012 Chevy Silverado 1500 ASAP.
by: Wayne 03/07/2023
2002 Chevrolet Silverado
Bolted up just fine.
One improvement would be a predrilled spot to attach plate for wire harness.
Wayne L.
3/9/2024
After a year, pulling a friend or two out of the snow or towing with in limit, Ive been happy with it. When I first called and ordered it they it would fit. Could not have lined up better. Two man job but a good investment. Would order again in the future.
by: Eric 03/21/2023
Great product, great customer service and a wonderful company to deal with. I highly recommend buying from Etrailer
Eric
4/1/2024
Works great! No issues at all 1 year later. Great product, great company.
by: Jake04/29/2024
We are a car dealer in central PA and have bought several Receivers and various wiring products from etrailer, we have yet to be disappointed. Fast shipping, Quality products, and an easy to use web site!
by: Lauren 05/30/2024
My old hitch receiver was rusted out so I needed a new one asap. This was easier to install than it was to get my old one off and it seems very good quality for the price!
by: Allan 04/12/2024
Well I was really happy with the quality and workmanship but I had to use a cutting torch and welder to move the bumper support bracket it was .5 “ off center front to back.
by: Ken04/01/2024
2011 GMC Sierra
we needed to replace the factory hitch because of rust in the tube.
this hitch does not have as many mounting points as the stock hitch
by: Douglas05/17/2024
2011 GMC Sierra
The wrong bolt package for attaching it to the truck was sent . I had to go and purchase bolts that would actually work . I was really frustrated about that .
by: Scott 01/05/2023
2001 Chevrolet Silverado
works great was fast shipping good heavy duty etrailer is the place to buy great stuff
Scott
1/7/2024
works great well made still looks good
by: Jeff02/25/2023
2007 Chevrolet Silverado
Installed on an ‘07 Silverado - 2WD, 4.3L, V6. Handles my boat & trailer great! Put it to the ultimate test on an 8hr. move to TN, pullin my brother’s fully loaded, 7.5’ x 16’ dual axle trailer - No problems!
by: William02/14/2024
Works great! I haul a lot of crap with this trailer receiver and hasn't failed me yet!
by: James 04/10/2024
2000 Chevrolet Silverado
Trailer hitch fit perfect on my 2000 Chevy Silverado 1500. Thank you for the instructional video which made installation super easy!
by: Jeffrey 03/29/2024
This is a great piece of equipment. I sits a little higher than the orgional, but I already have a drop down hitch. Fits perfectly, only took about 1.5 hours from start to finish.
by: Brad07/27/2023
Shipped on time, product fit as expected and came with necessary hardware. Very simple install.
25
1212
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- Will Curt C13900 Fit my 2001 Chevy SilveradoWhile the Curt Trailer Hitch Receiver part # C13900 Would fit your Silverado it would require a lot of modifications be made to the truck by drilling into the frame. Instead use the etrailer Trailer Hitch Receiver part # e98849 which is designed specifically for your 2001 Silverado and will not require any drilling. It is also more economical and has a higher weight capacity. Check your owner's manual to ensure that you do not exceed your particular trucks capacity. If for some reason...
view full answer... - Trailer Hitch For A 2010 GMC Sierra 1500The etrailer Trailer Hitch Receiver # e98849 has a maximum gross trailer weight up to 6,000 pounds. You would need to check your vehicle's manual to see what the proper towing capacity is for your 2010 GMC Sierra 1500. You're only as strong as your weakest component so if your vehicle is rated for 5,000 pounds for example and the trailer hitch is rated for 6,000 pounds you can only tow up to 5,000 pounds. The trailer can hold up to 7,000 pounds but if you're under the recommend towing...
view full answer... - Distance Between Mounting Holes of etrailer Hitch e98849 Front to BackThe distance between the front and back mounting holes of the etrailer hitch # e98849 is 11-1/2 inches.
view full answer... - Recommended Trailer Hitch For A 2003 Chevrolet Silverado 1500 With A Roll Pan BumperWhen it comes to installing a trailer hitch on your 2003 Chevrolet Silverado 1500 with a roll pan bumper I recommend The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e82AR which is confirmed to fit your vehicle. This trailer hitch has a bolt-on installation with no welding required. It has a matte black powder coat finish over a protective base coat that offers superior rust resistance. The trailer hitch has a maximum gross trailer weight...
view full answer... - Will Hitch From Early 90's Chevy C/K Series fit a 2007 GMC Sierra 1500The 1992 Chevy C/K series trucks and the 2007 GMC Sierra, whether it be a Sierra Classic or the new body style would use different hitches, unfortunately the hitch from your older Silverado wouldn't work on your GMC Sierra as the frames were different. For your 2007 Sierra 1500, if you have the Sierra Classic, I'd recommend the etrailer brand # e98849 Class III hitch that you'd looked at which has a 6000 lb towing/600 lb tongue weight capacity or 10000 lb/1000 lb if used with weight distribution....
view full answer... - Recommended Trailer Wiring Harness for a 2004 GMC Sierra to Convert Separate to Combined WiringIt sounds like you need to install a trailer connector on your 2004 GMC Sierra and if that's the case we have some great options for you. The Curt Powered Tail Light Converter Kit with 4-Pole Flat Trailer Connector part # C56190KIT is what I recommend. This harness will take the separate wiring on the truck and convert it to combined so you can tow a trailer. In addition to this, you'll also need a trailer hitch like the etrailer Trailer Hitch Receiver part # e98849 and a ball mount/hitch...
view full answer... - Will The 7- and 4-Pole Trailer Connector # HM40975 Fit on a 2002 GMC Sierra 1500? Yes, the 7- and 4-Pole Trailer Connector Socket # HM40975 will fit on your 2002 GMC Sierra 1500. It will connect directly to the factory wiring connector located behind your rear bumper. The included universal mounting bracket will allow you to secure it to the bottom of your bumper. You will be able to use this with the etrailer Trailer Hitch Receiver # e98849.
view full answer... - Will Trailer Hitch From 1996 Chevy Silverado fit 2004 SilveradoYou will need a new hitch for your 2004 Chevy Silverado 1500. The frame changed starting in 1999 with the next model, so the hitch from your 1996 Silverado will not fit the 2004. The etrailer Trailer Hitch Receiver # e98849 fits the 1999-2013 Silverado 1500 and would be a great choice for your truck.
view full answer... - What Trailer Hitch for a 2003 Chevy Silverado 1500 Fits Long Bed ModelsThe bed size does not matter for a frame mounted trailer hitch on a 2003 Chevrolet Silverado 1500, they will all work with both short and long bed models. The etrailer Trailer Hitch Receiver part # e98849 is what I recommend as a pretty basic, no drill trailer hitch. It is rated for 6,000 lbs which isn't the highest for this vehicle but will be plenty for most trailers for this vehicle so there is no need to pay more for a higher rated one.
view full answer... - Best Trailer Hitch for 2002 GMC Sierra 1500Yes! The trailer hitch # e98849 is a confirmed fit for your 2002 GMC Sierra 1500! I attached a video of the install process if you want to check it out. If you're using this to tow, you might also want to pick up our towing package with a ball mount # C45036 and wiring harness # C55384.
view full answer... - Would Trailer Hitch from 2011 Silverado 1500 also Fit 2018 ModelThe 2011 and 2018 Chevy Silverado 1500 models were different enough that the hitch fits had to change. So for example, the # e98849 fits the 2011 but not the 2018 and the # e98860 fits the 2018 but not the 2011.
view full answer... - Is The Curt Trailer Hitch Receiver 13301 A Fit For A 2006 Chevrolet SilveradoWhile we do have a solution for you, the Curt Trailer Hitch Receiver # 13301 is designed for new generation models starting in 2007. My recommendation is the etrailer.com Trailer Hitch Receiver Class III - 2" # e98849 for your 2006 Silverado because the matte black finish tends to be more scratch resistant than the glossy finishes like that of the Curt. Included are video resources for both.
view full answer... - Recommended Hitch Receiver & Brake Controller For 2010 Chevrolet Silverado 1500I recommend getting a 2 Inch Class III Hitch Receiver # e98849. That will be great for what you're planning to tow. It has a 6,000 lb max gross trailer weight capacity. As far as the braking system goes, the best and simplest brake controller on the market is the Curt Echo # C51180. This doesn't require all the wiring that comes with a traditional braking system and is all controlled by your phone. Super simply and easy. I've included some videos for you to watch to get a closer look...
view full answer... - Trailer Hitch Recommendation for Lowered 2001 Chevy Silverado 1500If you have the stock bumper then the hitches made to fit the stock bumper would work well for you. For that we have the etrailer.com hitch part # e98849 as a confirmed fit. This won't fit behind the license plate though. The roll pan bumper hitches like the part # 13932 might work for this since that's how they install but we can't guarantee they'll work with the factory bumper.
view full answer... - Distance Between Mounting Holes Left to Right of etrailer hitch # e98849The distance between the mounting holes of the # e98849 from left to right is 35-5/8 inches.
view full answer... - Compatible Bumper And Class III Trailer Hitch Receiver For A 1999 GMC Sierra The Westin Perfect Match Series Rear Step Bumper # 31006 is designed to replace an OEM rear bumper with the same exact fit so you would be able to use any class 3 hitch that fits the standard OEM bumper, like the etrailer Trailer Hitch Receiver # e98849. This hitch has a 600lb tongue weight capacity and 6,000lb towing capacity and is rated for use with weight distribution hitches, so that you can safely tow a trailer. You will need to check the capacity of the truck as well and go with...
view full answer... - Will Trailer Hitch from 1999 Chevy Silverado also Fit 1992Yes, trailer hitches like the Curt # C14081 do fit both a 1999 and a 1992 Chevy Silverado truck. This hitch fits 1988 to 2000 models.
view full answer... - Fit of etrailer e98849 Class III Hitch on 2008 Chevy Silverado 1500 LTZThe etrailer brand # e98849 is a fit for all trim levels of the 2008 Chevy Silverado 1500, including your LTZ. The hitch has a 6000 lb towing/600 lb tongue weight capacity or 10000 lb towing/1000 tongue weight if used with weight distribution. For a higher capacity, the Curt # 14301 has a capacity of 10000 lb towing/1000 lb tongue weight or 12000/1200 lbs if used with weight distribution. I've linked to installation videos and instructions for the hitches mentioned above.
view full answer... - Do Trailer Hitches Fit Multiple Years Of The Chevy SilveradoA lot of the trailer hitches available for the 2013 Chevrolet Silverado fit a span of over multiple years as long as the generation does not change. For example the etrailer.com Trailer Hitch Receiver part # e98849 fits 1999 - 2013 Chevrolet Silverado 1500. I would need to know if the 2013 chevy Silverado is a half-ton, three quarter or 1 ton. I would also need to know the bed size and if the truck is a cab chassis model in order to tell you which trailer hitches fit which years.
view full answer... - Recommended Hitch for a 2022 Subaru Forester Wilderness I verified that there is a trailer hitch receiver that fits your 2022 Subaru Forester Wilderness. It is the etrailer Trailer Hitch Receiver item # e83ZR. It fits both the Forester and the Wilderness model because they share the same frame. This hitch will bolt to your frame with included hardware. If you are planning on towing you will also need a wiring harness to control you trailer lights item # 118467 along with a ball mount kit item # C45534.
view full answer... - Difference Between Class III and Class IV Hitches for 2004 Chevy SilveradoClass III hitches that fit your 2004 Chevy Silverado like the # e98849 just aren't made for the same towing capacities as the Class IV hitches like # C14332. You'll notice that the Class IV mentioned here has more bolts that attach it to the truck frame as the most obvious difference. Other than that it's more or less the thickness of the metal used etc.
view full answer... - Does Installation of Trailer Hitch in 2003 Chevy Silverado Require DrillingThe holes are already in the frame of your 2003 Chevy Silverado 1500 for a trailer hitch receiver to be installed, which means you aren't going to have to do any drilling for installation. I recommend the etrailer.com Trailer Hitch Receiver # e98849 because it is a quality hitch with a matte black finish that is going to hide any potential scratches while also being the most economical option for a trailer hitch on your truck. I have added a link to the installation instructions as well...
view full answer... - Fit of etrailer Brand e98849 Class III Hitch on 2010 Chevy SilveradoThe etrailer brand # e98849 hitch which is a confirmed fit for your 2010 Silverado. The hitch installs using 6 bolts, two of which use nuts that are welded up into the holes closest to the rear of the frame as shown in the provided diagram. Two additional bolts are fed downward through the frame and are secured with nuts included with the hitch, and the remaining two bolts are used to attach the flange atop the receiver tube to nuts welded up into the underside of the bumper. It's entirely...
view full answer...
- Bumper Needed for a 2003 Chevrolet Silverado 1500 SSThe # e98849 is designed to fit the 2003 Chevrolet Silverado 1500. If you have an aftermarket roll pan bumper on your SS then you will need to go with # 13932.
view full answer...
Do you have a question about this Trailer Hitch?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Test Fit:
Joe V
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Ryan G
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Wilson B
Video by:
Jonathan Y
Video by:
Jacob H
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Scott H.
4/28/2024
It atill works very well. I use it a lot to pull a utility trailer. It has held up well and I think it will never fail.