Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13176
Retail:$318.95
Our Price: $222.32
Confirmed to Fit
2015 Chevrolet Colorado
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (227)
- Q & A (0)
- Photos
2015 Chevrolet Colorado - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Class III
- 2 Inch Hitch
- 8000
- Concealed Cross Tube
- 800
- CURT
- 10000 lbs WD GTW
- 1000 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Chevrolet Colorado's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Uses existing hardware from your vehicle
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 8,000 lbs
- Maximum GTW when used with weight distribution: 10,000 lbs
- Maximum tongue weight: 800 lbs
- Maximum TW when used with weight distribution: 1,000 lbs
- Maximum gross trailer weight: 8,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13176 Curt Class 3 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
8,000 lbs.
Tongue Weight (TW):
800 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Gross Towing Weight (GTW):
8,000 lbs.
Tongue Weight (TW):
800 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Tech Tip
Installation requires the removal of factory crossmember or hitch, which will be replaced by this hitch for support and safety. No drilling required for installation , Requires temporary removal of bumper/fascia during installation
Complete Towing Package for 2015 Chevrolet Colorado
Retail:$428.12
Package Price:$371.56
2015 Chevrolet Colorado Owners Who Purchased This Trailer Hitch Also Bought...
Popular Colorado Trailer Hitch Accessories
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Defective
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13176
Average Customer Rating: 4.6 out of 5 stars (227 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Aaron S02/20/2022
2022 ChevroletColorado
Perfect fit for my 2022 Chevrolet Colorado. No adjustments needed. I installed this hitch receiver all by myself taking my time. It took about two hours as I don’t have a lift and had to go from side to side under the truck. I also purchased the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector - Chevrolet/GMC which took me the longest having to strip and connect all the wires. This was a simple project for a diyer (me).
by: Daniel07/25/2022
2022 ChevroletColorado
Long story-short… it fits but arrives damaged and has some rust spots for the safety chain holes. Installed in ~3 hours doing myself - you NEED a breaker bar and torque wrench with 21mm socket (check out [hardware store]). Like other reviews mention/warn on its shipping and handling - the tow bar was severely bent and required me to take a large piece of scrap wood and hammer it straight so it would fit. Also - the trailer plug was shipped inside the box with the tow bar - and the packaging was so bad the plug was rattling around, screws were loose inside and the bracket was missing entirely (luckily I didn’t need the bracket). I was going to return the plug but etrailer was going to charge $xx for shipping… won’t be a customer from them anymore. If you can look past likely needing to rework the bar with a mallet this product will work for you.
Katrina B.
8/2/2022
It is common for hitches to bend or flex and to receive some scratches during shipment, since the mounting brackets are made from a mild steel that allows the hitch to flex with the vehicle after installation. If the entire hitch was made of rigid steel, there would be a greater chance of the hitch being damaged and experiencing stress cracks. Such cracks could cause the hitch to malfunction. This flexing often times will cause the holes not to align. Because of this we do have a help article I have the link attached below that will walk you through the process of straightening the hitch. As for the rust spots, we recommend using a rust-oleum type of paint to prevent any future corrosion. I have sent your information over to our customer service department for them to better assist you.
by: John05/05/2023
Your video details were excellent.
John
5/6/2024
Excellent
by: Henry H.10/01/2017
2017 ChevroletColorado
Excellent customer service, they guided me all the way in order to get the hitch I was looking for. The installation was super easy also. I recommend etrailer to all my family and friends. Thanks again.
Henry H.
10/1/2018
It is great, no complains and working like it was brand new.
by: Charles03/02/2019
2018 GMC Canyon
I didn't have any trouble with the installation. The hitch is perfect, it bolted right to my truck with no issues. I took this picture after I drove it, and the hitch is all dirty.
Charles
3/3/2020
The receiver still looks good on my truck.
by: Brandon06/02/2018
2017 ChevroletColorado
Love Etrailer, beautiful hitch. Fits my truck just like the factory one would, looks good, and has a healthy weight rating. No drilling or welding was nice, it fits in factory holes with factory hardware. The detail of the web site is incredible. The only reason I gave it 4 stars instead of 5 was that I felt it could have been packaged a little better. When it arrived, the hitch had ripped through the box and the mounting ears were bent which made it much more tedious to mount than it should have been. But I got it on there and it still ended up looking and working great. I would buy from them again.
by: After A Crash02/28/2020
2019 ChevroletColorado
I have a 2019 Chevy Colorado this is what it looks like after getting rear-ended at around 30 MPH is my guess. The hitch preformed very well in my opinion though damage to the truck was extensive "Needs a new frame". I definitely will purchase another one this is pretty much the best aftermarket hitch available I think.
by: Charles06/19/2018
ChevroletColorado
I wanted this hitch to put my bicycle rack on my Colorado. Maybe pit my dirt bike carrier on it later. No big towing. Beyond having to build a simple jig to keep the hitch from rolling over during installation, the unit installed well, despite some warnings in earlier posts of width problems. My unit slipped right between the bumper plates and frame rails as it should. Immediately put to work. Thumbs up to etrailer for quick shipping and a good product! Thanks!
by: Daniel 08/18/2023
2022 ChevroletColorado
The hitch is installed and looks great. Only one negative, I had to enlarge the slots on the spare tire support bracket. Apparently I should have moved the entire hitch rearward a bit but I had already adjusted the bumper and torqued everything down and I didn't want to re-do it.
by: Throb02/27/2024
2020 Chevy Colorado, got the hitch and 1.5 hours later, done! Easy install and it looks great!
by: Andrew O.09/09/2018
2016 GMC Canyon
Absolutely love my new curt trailer hitch! The response time was great! Package and trailer hitch was packed great! Installation instructions were very easy to follow. My only criticism would be the pictures were hard to see. Thanks for a great product!
by: Miranda11/04/2017
ChevroletColorado
Ordered this to put on my Colorado. Came by UPS and the box was pretty beat up and the only protected part was the actual 2" reviever.
When I went to install it seems it was just a 1/4" shy of fitting around the frame. Took it off to measure the distance and one of the flanges was leaned in just enough I didn't notice... I used a rubber mallet to beat it up into place around the frame. My impact didn't reach the bolts on the side so i had to do it by hand and because the product was cockeyed just enough it really made it hell to tighten down.
Looks outstanding and works great on a test pull, I'm not sure if the welder messed this one up or ups during delivery but make sure to use a measure tape to actually see if it fits before you start and it's very simple installation.
Didn't think to take pictures before and after...
by: Geraldjude07/20/2023
Carol,
I am always satisfied with my orders from etrailer. The hitch arrived today and I’m waiting for the cutting board.
Definitely 5 Star Service
Best Regards,
by: Andrew S02/15/2022
Super easy to install. High quality hitch overall. Added a B&W adjustable ball hitch and I couldn’t be happier. 10/10 would buy again
by: Teasha T.09/03/2017
Perfect fit and arrived fast! The second person was beneficial to raising the hitch level, and it definitely took longer with hand tools but was manageable. Thoroughly pleased.
by: Kayla11/17/2022
My Trailer hitch did not fit on my truck! The extra piece of metal on the passenger side prevented me from moving it in the last bolt position. I took the whole original bumper frame off only to have it not fit. So very frustrating. Shoddy work there. I have a chevy CO 2020. I bolted it on anyways, I hope the bolts hold. now I can't stand on the passenger side bumper to get into the truck bed because its unsupported. It was really hard to put on. Dont listen to them.
Jenny N.
11/21/2022
It sounds like it is possible that the hitch side bracket is flexed. How far off is the bolt hole from the hole in the frame? Have you tried moving the bracket back into position? We do have an FAQ that could help.
Helpful Links
by: Jordan A04/06/2019
Super fast shipping, easy to install, no drilling or hammering to fit. Easy, easy installation even for the not so mechanically inclined.
by: Kass07/29/2023
2022 ChevroletColorado
The entire shipment arrived quickly, ordered Sunday and it was there Wednesday. Hitch is heavy duty, welds look great I can’t wait to get a trailer on it.
by: Wesley 02/05/2024
Awesome product and fast shipping! It fit perfectly!
by: Gary S11/28/2016
2016 ChevroletColorado
This product was listed as OEM part for a 2016 Chevy Colorado and fit like a glove. Excellent quality and great directions. Thanks E-Trailer!
by: John05/26/2020
2019 ChevroletColorado
The hitch arrived very quickly, there was some slight damage but it was fixed quickly and easily. I installed the hitch this morning, everything went very smoothly. Installation took me longer than an hour but I'm kind of old and a little slow plus I was working on my back with only hand tools. I really like all the videos that are available, I found ones for my exact year and model truck. I also purchased the wiring kit, but I will install it later. I am very pleased with etrailer and their products.
John D.
5/27/2021
I like the hitch and I am glad that I installed it, but with the way things were last year, I did not get to use it. Hoping this year will be better.
by: Michael06/15/2019
The hitch went on without any extra effort. The hitch was exactly to specs.The whole project took about 1 1/2 hours.
by: Chris06/10/2020
This product works great on my 2016 Chevy Colorado. I would highly recommend removing the bumper first and having a second person assist when installing the receiver. The mounting brackets had to be widened minimally with a mallet. Overall, relatively easy to install. etrailer staff is very friendly and helpful.
After a year of use, I am VERY happy with this product and would highly recommend it.
Chris
6/11/2021
Excellent! Still works great 2 years later. Zero issues to date.
by: Steve A.06/18/2015
Receiver was a bolt in as was stated by etrailer. There is a bracket missing on the receiver that the spare tire support bolts to. I will have to configure something to hold the bracket. Other than the bracket it took 30 minutes on a lift with impact tools. Hand tools will take probably another hour.
Heather A.
8/30/2017
I called Curt about your concern with the spare tire bracket. The bracket is not necessary in the support of the spare tire since the cable tightens when the spare tire is raised back into position. You should not have any issues with support of the spare tire without this bracket. It also does not act as a heat shield so there is no problem there.
by: Tracy07/17/2023
Package arrived damaged and the product had some scratches and paint chips in the paint. Not a big deal but packaging could be better. Perfect fit on the vehicle but a second set of hands was very helpful. The video was great to watch and was very helpful. Would have gave a 5 star rating if packaging was better.
Katrina D.
7/20/2023
I'm sorry to see that your hitch has received some scratches on it due to shipping. This does tend to happen and when it does, we recommend using a Rust-oleum type paint to cover up any scratches and prevent corrosion in the future during use. I have a link below for your reference. I have also sent this information over to our Customer Service Department for them to get into contact with you.
Helpful Links
25
227
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Curt Hitch for 2016 Chevrolet Colorado that Retains the Spare Tire SupportI would be happy to help you. I have attached a picture of the Curt Trailer Hitch Receiver item # C13176 attached to a 2016 Chevrolet Colorado. You can see that the spare tire support brace is still attached on the bottom right side of picture. I have also linked the instructions for this hitch receiver as well. All of the after market hitch receivers for the 2016 Colorado's require the removal of either the factory hitch or the cross member. If you are looking for a wiring harness I...
view full answer...
- Trailer Hitch Receiver With The Most Ground Clearance for a 2021 Chevrolet ColoradoOf the hitches that we have fit in our shop on a 2021 Chevrolet Colorado the Draw-Tite Max-Frame Trailer Hitch Receiver # 76004 sat the highest. When we measured to the inside of the receiver tube the measurement was 18-1/2" from the ground. This will end up being around 16" for the ground clearance at the receiver tube collar. Both the Curt Trailer Hitch Receiver # C13176 and etrailer Trailer Hitch Receiver # e98909 measured in at 18" from the inside of the receiver hitch to the ground....
view full answer... - Trailer Hitch, Trailer Connector and Towing Accessories Suggested for 2020 Chevy ColoradoA hitch is indeed available! I'd recommend the US made Curt Class III hitch, part # C13176. The hitch has a 8000 lbs towing/800 lbs tongue weight capacity, so it'll be able to handle any towing job you throw at it (as long as you don't exceed the towing capacity of the truck itself). If your truck doesn't already have a trailer connector, I'd recommend # HM11141144 which provides both a 7-way and a 4-pole connector. You'll also need a ball mount like # 2923 and # 19260 for a 1-7/8 or...
view full answer... - Recommended Hitch and Wiring Harness for a 2022 Chevy Colorado I would be happy to clarify that for you and make a recommendation. Both the Curt item # C13176 and etrailer item # e98909 trailer hitches are identical except for the finish on them. Both hitches are confirmed to fit your 2022 Chevy Colorado. I recommend the etrailer Trailer Hitch item # e98909. This hitch is custom fit and bolts to your Colorado with included hardware. It has a matte black rust proof finish that does a great job of blending in beneath your truck and it will save you...
view full answer... - Recommended Wiring Setup for a 2015 Chevy Colorado Crew Cab Without a Tow PackageI contacted Curt Manufacturing and even though your 2015 Chevy Colorado Crew Cab doesn't have a tow package, the wiring connection point will be up under the bumper area, near the spare tire. You will use the Curt custom fit wiring # C56515. This will give you the 5-way flat trailer connector to power your trailer's signal lights. If it's a 4-way connector then use Hopkins wiring kit # 41155. A mounting bracket, like # 18144, is something to consider because the bracket attaches to the...
view full answer... - Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy ColoradoThere is only one difference between the Curt Trailer Hitch Receiver # C13176 and etrailer Trailer Hitch Receiver # e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer hitch has a matte black finish; other than that everything is equal, such as their 6,000 lb towing/900 lb tongue weight capacities, as well as the installation. The two have hidden crosstubes which means only the receiver is showing (see...
view full answer...
- Does Spare Tire Bracket Get Bolted to Curt Hitch C13176 on 2016 Chevy ColoradoThat is a good question, and there is not a place for the bolts for the spare tire bracket to mount for your 2016 Chevy Colorado when installing the Curt Trailer Hitch Receiver # C13176. We have asked Curt about this very issue, and what they said is that the spare's bracket is not needed in order to support the spare tire because the cable gets tightened after raising the spare into position, so it will stay firmly in place.
view full answer... - Hitch Receiver Wiring Harness and Ball Mount for a 2022 Chevrolet Colorado I would be happy to help you set your 2022 Chevrolet Colorado up for towing your small trailer. I recommend the Curt Trailer Hitch Receiver item # C13176. This is a custom fit hitch that bolts to your Colorado's frame with included hardware. The powder coated steel is sturdy and corrosion resistant. I have attached a picture and an installation video so you can see the final product and the install process. For your wiring harness you will need the 7-Pole and 4-Pole Trailer Connector Sockets...
view full answer...
- Does Spare Tire Stay On When Installing Curt Trailer Hitch on 2019 Chevy ColoradoI took a look at the installation instructions for Curt Trailer Hitch # C13176 and according to those the spare tire will stay on when mounting the hitch in your 2019 Chevy Colorado. This hitch is a great choice for your Colorado and will not require any drilling to install. It has an 8,000 lb towing capacity, 800 lb tongue weight capacity, and comes with a lifetime warranty. I have added a link to a video of this hitch being installed on a '19 Colorado for you to take a look at as well.
view full answer...
- Difference Between Curt and etrailer Trailer Hitch Receivers For 2022 Chevrolet ColoradoThat is a great question, lets get to the details: **Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13176. *etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98909. Both of these units will have the same weight capacities: 800 lbs. max tongue and 8,000 lbs. max trailer. If you add weight distribution they both stay equal: 1000 lbs. max tongue and 10,000 lbs. max trailer. They both have lifetime warranties. The only difference that you...
view full answer... - Does the Curt Hitch # C13176 Fit 2016 Chevy Colorado WellI would say the opposite is true. We have had several people come back and say the Curt hitch part # C13176 fit their 2016 Chevy Colorado very well. I attached a review for the the hitch that details this. I attached an install video for this hitch on a 2016 Colorado like yours for you to check out as well.
view full answer...
- Comparison of Curt C13176 and etrailer Brand e98909 Class III Hitches on 2022 Chevy ColoradoIn terms of appearance, install procedure and weight capacity the Curt # C13176 and etrailer brand # e98909 are identical. Both hitches are proudly manufactured in the USA. The only difference between the two is the powder coat finish. The Curt hitch uses a glossy finish, while the etrailer brand hitch uses a matte powder coat. I personally prefer the matte finish because I think it makes the hitch less visible, but that's purely a matter of personal preference.
view full answer...
- Best Hitch for a 2022 Chevrolet Colorado Without a Factory Tow PackageThe Hitch I recommend for your 2022 Chevy Colorado is the Curt Trailer Hitch Receiver # C13176. This hitch is Made in the USA, will fit all models of the 2022 Colorado and has a bolt-on, no drill installation. This hitch will also provide you with a 2" receiver opening which is the most common size opening used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. If you are planning to do any towing and do not already have a wiring connector at the back of...
view full answer... - Recommended Trailer Hitch For A 2022 Chevy Colorado For your 2022 Chevy Colorado I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98909. It has the same capacities as the other option, the Curt Trailer Hitch Receiver # C13176, but it has two key differences. The first being the cost, the etrailer # e98909 is going to give you the same reliable and trusted quality but at a more economical price point. The Second difference being the paint job, the etrailer # e98909 is protected with a...
view full answer... - Will a Round Tube Trailer Hitch Have More Flex and Lower Performance of Weight Distribution SystemIn my opinion, since you already have the OEM hitch on your vehicle, I would not replace it with a square tube hitch, especially if you aren't having any issues with towing. Consumers tow everyday using a weight distribution hitch with a round tube hitch and do just fine. I consulted with my contact at Cequent, the parent company of Hidden Hitch, Draw-Tite, and Reese, to get their opinion as well and basically the round tube is going to be a little less resistant to torque but as long...
view full answer... - Class III Trailer Hitch Recommendation for 2020 Chevy ColoradoWe have great trailer hitch options for your 2020 Chevy Colorado, but all of them would be considered Class III. The hitch I'd recommend is the Curt # C13176 as it's made in the USA, has a hidden crosstube which makes it a bit less visible, and has plenty of towing capacity at 8,000 lbs trailer weight. I attached an install video for this hitch for you to check out as well.
view full answer...
- Will a Curt Trailer Hitch Fit a 2012 Chevy Colorado Built in ThailandTrailer hitch # C13176 is designed for 2015 Chevy Colorados and GMC Canyons. It will not fit a 2012. If your 2012 Chevy Colorado was designed for the US market then you should be able to use trailer hitch # 13252. I have linked a video showing installation of this hitch. But if the truck was built for the Asian market of any market other than the US market, none of the trailer hitches we carry are confirmed to fit. If you plan on doing some towing you might be interested in etrailer...
view full answer... - Recommended Trailer Hitch for a 2019 GMC CanyonI recommend installing the Class III Curt Trailer Hitch Receiver # C13176 on your 2019 GMC Canyon because it is an easier installation than most of the other options and it has the safety chain loops located under the receiver for easier access. I have attached pictures and a video of this installed on a 2019 Colorado for you to reference. If you don't already have a wiring harness on your Canyon then I also recommend installing the Hopkins # HM40975-11998 for a fully functional 7-Way....
view full answer...
- What is the Difference in the Curt and etrailer Hitches for a 2022 Chevy Colorado?The only difference in the Curt item # C13176 and the etrailer item # e98909 is the finish and the cost. Both hitches are manufactured by Curt to the same standards and specifications. I prefer the etrailer hitch item # e98909 because of its flat matte finish. It tends to blend in better beneath a vehicle's trim then the glossy finish of the Curt item # C13176. Both of these hitches are confirmed to fit the 2022 Chevy Colorado. I have linked a couple of installation videos below so you...
view full answer... - Can a 2015 GMC Canyon Tow a 5th Wheel TrailerThe 2015 GMC Canyon (which they build right across the street from us) cannot tow a 5th wheel trailer. The bed is too narrow and none of the manufacturers make an installation kit that will fit it. You will have to go with a full size truck (or a travel trailer instead of a 5th wheel). If you go with a full size truck I strongly recommend at least a 3/4 ton and definitely a long bed. If you decide on the Canyon and tow a travel trailer instead of a 5th wheel trailer then for a trailer...
view full answer... - Trailer Hitch Recommendation to Replace Factory Hitch of 2016 GMC CanyonThe Curt hitch part # C13176 is a confirmed fit for your 2016 GMC Canyon. It is designed to replace the factory hitch you mentioned so it's going to work out well for you. The warranty of your vehicle would not be voided by installing this hitch either. I attached an install video for more info for you to check out as well.
view full answer... - Hitch Recommendation for a 2015 Chevy ColradoThe Curt Hitch part # C13176 that you referenced has been confirmed to fit your 2015 Chevy Colorado so I would recommend it for you. You might need the following to complete your towing system: 4-pole/7-way Trailer Connector, part # HM40975 Ball mount, part # C45010 1-7/8 inch trailer ball, part # 19260 2 inch trailer ball, part # 63845 Locking hitch pin, part # e98882
view full answer... - Does Cross Member of a 2015 GMC Canyon Get Removed to Install Curt Hitch C13176The factory cross member or hitch of your 2015 GMC Canyon will have to get permanently removed to install the Curt Hitch part # C13176 that you referenced. This hitch will replace the cross member and as long as you install it correctly your warranty would not be voided. You will be able to reinstall your spare tire with this hitch installed as well. There are safety chain loops on this hitch too. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900....
view full answer...
- Trailer Hitch Receiver and Vehicle Wiring Harness For a 2021 Chevrolet Colorado The Curt Trailer Hitch Receiver # C13176 is confirmed to fit all models of the 2021 Chevrolet Colorado. This class III receiver is capable of a tongue weight of 800lbs and towing 8,000lbs. With a weight distribution hitch you can have up to 1,000lbs of tongue weight and 10,000lbs towing. Consult your local dealership for your exact towing capabilities of your Colorado and do not exceed the maximum rating of either the vehicle or receiver, whichever is lower. I recommend the Hopkins Multi-Tow...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Test Fit:
Randy B
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Written by:
Wilson B
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Isabelle B
Video by:
Schuyler H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Aaron S.
2/21/2023
After a year of use it is still working perfectly and I use it all the time.