To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This fully welded trailer hitch receiver bolts onto your Chevrolet Captiva Sport's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling required for installation , Exhaust must be temporarily lowered for installation
Average Customer Rating: 4.6 out of 5 stars (14 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.Hitch receiver was shipped quickly and was very easy to install, fit my Captiva perfectly. Thank you very much.
Perfect fit ,came with all the hardware and I got it in two days
Easy to install, been through a full winter with no rust or corrosion
It is working out great and I'm very pl eased.
I was pleasantly surprised at how fast I received my hitch in the mail and how easy it was to install
2nd time I have bought a hitch from these guys(gmc terrain) video was awesome had it installed in about 1hr.. Very sturdy and looks great.
Very good product. Good customer service and done in a timely manner
fit good just didnt have the right size bolts sent for a 2008 saturn vue
fit great
Very easy installation on my 2012 Captiva Sport LT. Hitch is out of the way and doesn't look like an ad-on. Shipping was amazingly fast. Received in 3 days. Thanks for the great service.
Installed the etrailer hitch kit on my wife's Chevy Captiva...looks very good!
The second tow hitch purchased from eTrailer, a 2014 Chev Captiva LTZ. Quick delivery and easy to install. Thank you once again.
Easy installation. Simple sturdy design. Satisfied with both of my Curt trailer hitch receivers purchased from etrailer.com (2008 Saturn Vue/2005 Hyundai Santa Fe). I use these receivers primarily for hauling a single axle 5 x 10 foot utility trailer as well as the occasional 16 and 20 foot rental equipment flatbed trailer. Can recommend for these uses.
This is a very acceptable product. We like that you can't see the steel support system of the hitch. You can only see the receiver.
We have hauled many trailer trips successfully. We just carried a mobility scooter on a carrier (see attached photo) to Florida and back with no problems.
Thank you for your well made product.
The only reason I didn't give this this a five star review is the packaging. Parts of the hitch were exposed and the nice power coating was scratch off down too the bear metal where I will have to repaint to avoid rusting. The only other hard part of the hole instillation was cleaning the welded threaded bolt holes on the vehicle so the bolts would turn freely. Plus I added lock washers. Besides these couple of small hiccups everything lined up great and instillation went well on my 2012 Chevy Captiva Sport. Did have to lower muffler very easy, put strap around it so not to put to much stress on the front of exhaust :)
Rock solid product! And looks sweet!!!
Great construction, fits perfect, and all holes lined up perfect. The top of the hitch receiver sits approximately 1/4 inch below bumper, for a factory look.
Thank you, etrailer!
The hitch arrived quickly after ordering, was relatively easy to install (I now know how to lower an exhaust system, which is easier than it sounds), and it is ready for use!
Thank you etrailer!
Service was great and product was received fast. Packaging of hitch receiver was very poor! Placed in box with no materials inside box to keep hitch from sliding around inside box. When it arrived it had busted through the box on both sides and was sticking out! Took it out of box to make sure it was not bent. It was not but had some scratches on it. It’s a good thing this hitch is made with heavy duty steel!!
Got the Curt hitch receiver on time yesterday great hitch fit like a glove. me and a friend put it on this morning in less than an hour with out jacking it up. did not have to drop the muffler like a video said. Im 65 he is 68. GREAT PRODUCT
I installed this on my 2008 Saturn Vue without incident. Cleaning out the screw holes was difficult. I think the right sized tap would have been a good investment. That's no reflection on the product though. Installation was simple, overall, and the video instructions were perfect.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.