THIS ITEM IS NOT A FIT FOR
2022 Ford F-150
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13401
Retail:$420.87
Our Price: $226.94
You Save: $193.93
2022 Ford F-150
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (25)
- Q & A (0)
- Photos
CURT Trailer Hitch - C13401
- Class III
- 2 Inch Hitch
- 5000 lbs GTW
- Visible Cross Tube
- 500 lbs TW
- CURT
- 10000 lbs WD GTW
- 1000 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 10,000 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 1,000 lbs
- Maximum gross trailer weight: 5,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13401 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 1973 - 1982 Chevrolet Blazer
- 1983 - 1991 Chevrolet Blazer Full Size
- 1973 - 1982 GMC Jimmy
- 1983 - 1991 GMC Jimmy Full Size
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Defective
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13401
Average Customer Rating: 4.9 out of 5 stars (25 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Ray04/26/2022
1984 Chevrolet Blazer
etrailer gets nothing but 5 stars from me
Great prices & excellent information.
My only complaint is not etrailers fault
Ups did there absolute best to destroy this thing, IF hardware wasn’t triple wrapped with tape to the hitch l, it would have not made it here.
2 thumbs down for ups !
by: Justin02/20/2020
The fit was almost spot on, there was one hole that I needed to enlarge with a burr bit. I work in the fabrication world so I run into this problem a lot. I’m happy with the product though.
by: Stephen 11/29/2021
This is a heavy steel item with the best hardware included. I'm impressed with the installation. I did have to drill a couple of holes but I didn't have to remove the gas tank.
Stephen
11/29/2022
Its been a year? Wow. There have been no problems with the hitch at all.
by: Sara02/10/2019
Chevrolet Blazer
Curt items are top notch and is always the brand I go to for all my towing needs.
This particular hitch was super easy to install, and fit perfect on a mid 70’s 2wd chevy blazer.
Sara
2/11/2020
Perfect. No complaints
by: Steve 06/07/2023
GREAT QUALITY,DOING ITS JOB
by: Chip10/24/2018
Chevrolet Blazer
It was the exact same fit as the 30 year old hitch I removed. Bolted right up and works great. My son and I rebuilt my old 87 K5 Blazer. Looks great with the new hitch. Extremely pleased.
by: Bob07/07/2022
The hitch is great. It was ordered for a 1978 GMC Jimmy and it only took a couple of hours to install. Everything fit perfectly.
by: Glenn K.03/28/2020
Perfect fit, nice finish, complete with hardware and fast shipping. hat more can you ask for?
by: Earl 11/27/2021
1977 Chevrolet Blazer
The receiver hitch came fast and in great shape and was easier than I thought to install. The inclusion of the fish wires FOR installing the front set of bolts is "GENIOUS!"
by: Tom03/30/2019
1985 Chevrolet Blazer
Shipping was FAST. Haven't put it on yet, have to remove the GI Issue hardware first. I held it up to the chassis long enough to see it would bolt right on. Will put it on in a few weeks, don't forsee any problems.
by: Steve 08/07/2022
1988 GMC Jimmy
Perfect fit, very well made. Would definitely buy from etrailer again!
by: Michael04/06/2019
Great fit, easy install, SUPER fast shipping. Well done etrailer.com!
by: Bill05/14/2018
1988 GMC Jimmy
Great product for price , etrailer staff great verry helpful verry pleased !!!
by: Garth R01/13/2021
Fit good. Didn’t have to drill anything. Very happy with the hitch.
by: Jason07/22/2018
1990 GMC Jimmy
It fit great but I the package was missing the two hex bolts so I had to run to the store. Other than that it went well and it is well made.
by: bigspringed05/10/2019
perfect fit and easy to install. Has worked as designed.
by: Victor03/08/2019
Fit perfect no complaints
by: John 08/14/2022
by: Kelly 03/16/2021
1986 Chevrolet Blazer
by: Paul 11/30/2020
1973 Chevrolet Blazer
by: Nikolaos11/29/2022
by: Michael 07/07/2021
by: Eric 08/26/2021
1987 Chevrolet Blazer
by: Devon 07/30/2021
1985 Chevrolet Blazer
by: Ali 12/18/2021
1977 Chevrolet Blazer
25
25
See what our Experts say about this CURT Trailer Hitch
- Bolt Holes Dimensions for the Curt Trailer Hitch Receiver # C13401Both sets of holes for the Curt Trailer Hitch Receiver # C13401 measure 32" apart on center. I have attached a photo with dimensions for you to reference.
view full answer...
- Does Curt Hitch # C13401 Fit 1991 Chevy Blazer K5Yes, the Curt hitch part # C13401 that you referenced does fit the 1991 Chevy Blazer K5.
view full answer... - No Drill Trailer Hitch Recommendation for 1985 Chevy Blazer K5For your 1985 Chevy Blazer K5 the Curt hitch part # C13401 that you referenced is a confirmed fit. It does not require any drilling to install and is held in place with 4 Grade 5 carriage bolts that are 1/2-13 x 1 3/4.
view full answer... - Dimensions of the Curt Trailer Hitch Receiver Part # C13401The distance from the top of the mounting flange to the top of the receiver tube on the Curt Trailer Hitch Receiver part # C13401 is 7". I have also attached a photo with some other measurements for you as well. If you do not see the one you need please let me know and I would be happy to acquire it for you. This hitch fits the following vehicles: 1973 - 1982 Chevrolet Blazer 1973 - 1982 GMC Jimmy 1983 - 1991 Chevrolet Blazer Full Size 1983 - 1991 GMC Jimmy Full Size
view full answer...
- Class III Hitch That Fits 1989 Chevy Silverado 1500 Standard CabWould you be able to tell me if you have a Crew Cab on your Silverado? Also, do you know what kind of bumper you have? Standard, Step, Roll Pan, Deep Drop. I also assume your truck is 4WD but want to confirm that as well. If you can get back to me with this information I may be able to find you something that works.
view full answer... - Does Curt Trailer Hitch Fit 1973 Chevy BlazerI checked with Curt, and their trailer hitch receiver will in fact fit and around the fuel tank of your 1973 Chevy Blazer, with the correct fit being the following hitch: - Curt Trailer Hitch Receiver # C13401 What you will have to do for your '73 Blazer though is drill out the forward-most attachment holes in the frame in order to mount the hitch. I have added a link below to a copy of the installation instructions for you to take a look at.
view full answer... - Trailer Hitch and Wiring for a 1977 Chevy Blazer 2-Wheel DriveCurt trailer hitch # C13401 will fit your 1977 Chevy Blazer. I also checked the installation instructions, linked for reference, and it does not exclude 2-wheel drive or 4-wheel drive models so you are good to go! If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage...
view full answer... - Mounting Hardware for Curt Trailer Hitch C13401Absolutely! For just the mounting hardware for the Curt Trailer Hitch # C13401 you will need part # RHK. Once on the product page simply type the part number (C13401) into the text box provided and select "Curt" from the manufacturer drop-down menu. We will then send you the complete hardware kit for this particular hitch.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Laura H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Justin
2/20/2021
Still appears to be attached. People’s shins are not a big fan of your product though. Heck, I ripped a jeep framed out and my hitch didn’t jettison through their back window. Other than my small trailer which it doesn’t see I’m still satisfied with my purchase