Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(6 reviews)
Price: $185.01
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13518
Retail:$308.95
Our Price: $185.01
You Save: $123.94
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Need help with installation?
Locate installers near me- All Info
- Reviews (6)
- Q & A (0)
- Photos
CURT Trailer Hitch - 13518
- 2 Inch Hitch
- Class III
- 3500 lbs GTW
- Visible Cross Tube
- CURT
- 350 lbs TW
- 4000 lbs WD GTW
- 400 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 4,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 400 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13518 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2007 - 2009 Suzuki XL7
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13518
Average Customer Rating: 4.8 out of 5 stars (6 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Toney06/06/2024
i really liked the way u ran with my message thank u
by: William L.02/12/2012
2009 Suzuki XL7
First of all, etrailer.com service is amazing. I ordered the hitch, wiring and ball kit on wednesday afternoon, they were on my doorstep friday morning!! Wiring installation was a breeze, however on my 09 XL7, the plug for the harness was up in the pillar above the jack, not on the floor below it, aside from that it took me less than 5 minutes to install and verify the wiring was correct. The hitch was easy to put on as well, although an extra set of hands isn't a bad idea, makes it easier to hold it in place till you get the bolts started. I had the hitch and wiring installed in less than 20 minutes, no drilling, cutting, welding of anykind! It doesn't get any easier than this. I saved a little over $100 doing this myself (based on quote from a certain rental company that installs hitches)...not bad for 15-20 minutes of work. Excellent product, excellent service, I would absolutely recommend etrailer.com to anyone.
by: Grayson06/06/2015
2007 Suzuki XL7
Installed trailer hitch easily in less than a hour using video instructions. Fit perfectly using the bolts supplied.
by: CraigS07/23/2019
2007 Suzuki XL7
Excellent product!! Would definitely buy from etrailer.com again!!
by: Tom S06/07/2017
It fit perfect the only problem was the hardware was the wrong size. So I had to run 20 miles to town to get the correct bolts. So 4 out of 5
by: John S05/30/2012
Easy to install...perfect fit.
6
6
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch Receiver Fit for 2008 Suzuki XL7We do have a trailer hitch for your 2008 Suzuki XL7, but the one you mentioned will not fit as it is for certain model year Chevy/GMs and Saturns. For your XL7 what you will need is the Curt Trailer Hitch Receiver # 13518. I have added a link below to a video install of this hitch for you to check out. And if you plan on towing and need a wiring harness for your 2008 XL7, the correct one will depend on if you have the factory tow package. If you DO have the tow package the correct harness...
view full answer... - Needing a Trailer Hitch and Wiring Harness for a 2009 Suzuki XL7For your 2009 Suzuki XL7, we carry the Curt Class 3 Trailer Hitch # 13518 that is confirmed to fit. I attached an installation video for you. As for if your Suzuki is pre-wired for towing, you will have to see if your vehicle has the wire plug installed. To do this, please review the attached video on installing a trailer wiring harness on a 2009 Chevrolet Equinox. The two vehicles where manufactured together under a GM/Suzuki. The video will show you how to remove the jack cover panel...
view full answer... - Parts Needed To Tow a Trailer with a 2007 Suzuki XL7I do have all of the parts that you need to tow with your 2007 Suzuki XL7 but I cannot advise on the compatibility of parts from our competitors. For a trailer wiring harness, the Curt T-Connector Vehicle Wiring Harness part # C56012 is correct if you have the factory tow package or the Curt Circuit Protected Converter part # C56175 if you do not have the factory tow package. I have attached an install video for you that shows the install on a model with the factory tow package. If you...
view full answer... - No-Drill Trailer Hitch Recommendation for a 2009 Suzuki XL7You are correct. The Curt trailer hitch # 13518 is a bolt-on installation and no drilling is required. I have included a link to the installation instructions for you. You will see that there are bolt holes on the frame of your 2009 Suzuki XL7 where the hitch will attach. All of the hardware to attach the hitch is included. If you plan on doing some towing I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin and clip, and a carrying bag. For...
view full answer... - Trailer Hitch, Ball Mount, Hitch Ball, and Trailer Wiring for a 2008 Suzuki XL7The Curt Trailer Hitch # 13518 for the 2008 Suzuki XL7 will have visible cross tubing beneath the rear of the vehicle. Based on where the mounting locations are on the vehicle, the hitch had to be designed accordingly and that is why there is visible cross tubing. It doesn't look bad, it is tucked right under the bumper. I attached an installation video for you to see how it installs and to see the finished product. If you plan on doing some towing the recommended ball mount is # C45010...
view full answer... - What Size Bolts Come with the Curt Hitch 13518The included mounting hardware of the Curt hitch part # 13518 are 12mm-1.75 X 30mm Cl 10.9 Hex head bolts. All of the hardware is included with the hitch. The torque rating for all of the installation hardware that comes with the # 13518 that you referenced is listed in the install instructions that I attached in a link to the right. Since we link the instructions directly from the manufacturer and they are subject to change we avoid posting the torque figures for liability purposes. For...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Video by:
Andrew K
Written by:
Lindsey S
Expert Research:
Michael H
Video Edited:
Joshua S
Test Fit:
Shane T
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.