Roadmaster 6-Diode Universal Wiring Kit for Towed Vehicles with Separate Lighting
Our Price: $194.24
Confirmed to Fit
2009 Toyota FJ Cruiser
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
23% prefer this
12% prefer this
- All Info
- Reviews (56)
- Q & A (0)
- Photos
2009 Toyota FJ Cruiser - Roadmaster 6-Diode Universal Wiring Kit for Towed Vehicles with Separate Lighting
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Roadmaster
- Universal
Connect your towed car's lighting system to your RV's to get the brake lights and turn signals required for towing. Designed for use with Toyota FJ Cruisers that have separate brake and turn signals. 4-Pole flat loop and wiring converter included.
Features:
- Connects your RV's tail, brake and turn signal lights to your towed vehicle's lighting system
- Designed for use on towed vehicles that have a 3-wire system (separate brake and turn signals)
- Prevents electrical feedback and the damage it can cause to your towed car's electrical components
- Includes tail light converter to adapt your RV's 2-wire system (combined brake and turn signals) to work with the towed car's 3-wire system
- Contains everything you need to wire your car for flat towing
- 6 Hy-Power diodes
- Tail light converter
- 30' Long strand of 4-wire electrical cord
- 6' Long cord with 4-way flat connectors - both vehicle and RV ends
- Ring terminal and wire connectors
- 3' Long split-wire loom
- Limited Lifetime Warranty
Specs:
- Max amperage: 85 amps
- Max voltage: 24 V
Note: If your RV has separate brake and turn signal lights, you do not need to install the included tail light converter. However, you will need to replace the 4-way vehicle-side connector with one that is capable of carrying the separate signals.
The diagram below shows the installation of the 6-diode tail light wiring kit on a towed vehicle (or dinghy) that has separate turn signals (typically amber) and red brake lights. This kit will most often be used with a motor home that operates off of a 2-wire system wherein the brake lights do the flashing for the turn signals. The included tail light converter (118158) is used to convert the combined brake and turn signal lights to separate ones to match those of your towed vehicle.
154 and 792 Roadmaster Universal Wiring Kit with 6 Hy-Power Diodes and 118158 Tow Ready Tail Light Converter
Item # 154-792-118158
Installation Details
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- Received too many
Customer Reviews
Roadmaster 6-Diode Universal Wiring Kit for Towed Vehicles with Separate Lighting - 154-792-118158
Average Customer Rating: 4.8 out of 5 stars (56 Customer Reviews)
Connect your towed car's lighting system to your RV's to get the brake lights and turn signals required for towing. Designed for use with vehicles that have separate brake and turn signals. 4-Pole flat loop and wiring converter included.by: Chris B03/25/2015
Subaru Outback Wagon
In ordering the parts I got a little confused as to exactly which kit I needed. My motorhome has combined brake/turn signal lights & the car ('03 Subaru Outback) has separate brake/turn/parking lights. Thought I needed the 6 diode kit (which I ordered) until I had all the parts here & read through the instructions for the umpteenth time (BEFORE cutting anything) & then realized what they were doing. Turns out all I needed was the 4 diode kit. Sounds like there won't be any problems returning the unneeded parts since they were never installed. Great service there!
Took a lot apart in the back of the car because of the lack of space behind the tail light assemblies, but it all comes apart pretty easily. Also allowed me to route the wiring along side the stock harness. Have a bunch of 1/2" split loom here & used it.
Thought I would have lots of wire left over, but I actually had to splice 2 cut offs to make a jumper long enough to get from 1 side of the car to the other. Glad the car wasn't any longer & I didn't have to make up 2 jumpers as with some of the kits!
Hardest part was finding a hole in the firewall & getting the harness routed under the dash so as to not tangle with the pedals, etc. I just don't flex like I used to.
Everything works fine although it was NOT a "5 minute job".
by: Christopher 06/10/2024
Looks pretty simple to assemble
by: Rich L.03/05/2013
Chevrolet Volt
The diodes and wiring are good and worked well. But the 118158 converter produced a 3.5 volt drop such that the brake lights were as dim as the tail lights. And when a turn signal was triggered the brake lights dimmed even further. I ended up stringing a separate brake wire through the car and re-wiring my truck with a 5-wire connector.
by: Jerry B.08/04/2013
2013 Honda CR-V
Prompt deliver of product. We haven't gotten this part of our project installed, we are still watching YouTube videos and other info on procedure. Had very little difficulties installing base plate on our 2013 CRV this should go well also. Our lights are a little more complicated but once we figure out how to actually wire to them every thing we've learned so far is very straight forward.
by: Christopher03/14/2018
2012 Ford Five Hundred
I used this wiring kit on a 2012 Fiat 500 Sport. All of the components worked as advertised and I am really pleased with the result. I used the 6 diode kit so the FIAT's turn signals would work the same when it's being towed as when it is driven.
This was my first light wiring kit installation and it was quite a challenge on the small FIAT to fish the flat cable from the rear of the car to the front. I ran it along the drivers side - over the rear wheel well, along the rocker panel, and up over the front wheel well. The wheel wells were the most difficult part of the job. Running the cable from driver's side to passenger side along the rear bumper and running it from the front wheel well to the front of the car and installing a connector were straightforward.
One problem I ran into is the female disconnect terminals supplied with the kit that are used to connect wires to the diodes anticipated a thicker wire (16-14 AWG) than what the FIAT uses. A quick trip to a close by big box store was all that was needed to find the same connectors for a thinner gauge wire (22-18 AWG). You still use the supplied disconnect terminals with the flat cable connections to the diodes.
by: John J06/12/2016
Honda
I bought this wiring kit because I wanted to wire my 2013 Honda CRV myself. E-Trailer has a video that is helpful in its installation . What I later found out was you need to route the wires through some covers underneath the vehicle and unless you have some means to raise the vehicle pretty high that routing will be difficult. I went to the Honda dealer and several other auto places and no one would install this kit for me because of liability reasons so now I have a product of question. I ended up at a friends garage who had a lift and we routed the wire from side to side and from front to back in about 20 minutes. Once secured in place I took the car home to finish the diode installation. Using the video it was easy to install. The only problem I had was putting the rear tai lights back in. You will need the separate the diodes as the space between the body and light housing is very close. Other than that everything worked out well.
by: Dale H06/26/2020
2013 Honda Fit
An ingenious system that enables a combined break and turn signal set up on your RV to properly operate the separate turn signal / brake setup of your toad. Beautiful!
Dale H.
6/28/2021
Have been using the brake and turn signal system for over a year now, and it is still working flawlessly!!
by: ALEX A11/08/2016
The wiring works great, I got more in the KIT than I could possible use and I am sure I had to pay for the extras, but I got what I needed and am very happy.
Alex A.
11/8/2017
it is doing great
by: Bill02/05/2018
Toyota Tacoma
I used the wiring harness on my Tacoma pickup in preparing to tow it behind our 40’ motorhome. The harness went on easily from the front grill to the rear lights, where I soldered and heat wrapped each connection. The instructions were ample and easy to follow.
It’s been a year since the installation, and the wiring has worked flawlessly!
by: Jean C07/24/2019
Honda Civic
The Roadmaster Wiring Harness was installed easily by our mechanic and works perfectly with our Civic and RV. I'm certain we will use etrailer.com for our new dinghy towing requirements!
by: Danny07/05/2014
2013 Chevrolet Sonic
I found the product to be of very high guality. I did not supply pictures as I would need to remove my taillights again. I had to covert a motor home that did not have separate turn signals to a Sonic that did. The materials supplied allowed me to just that. I do have two other comments-The instructions showed the wires on the car on the passenger side which is opposite from the Sonic and most others I would think. I had to reverse my thinking to do the correct procedure. Also, could you not supply unit specific instructions if the towing vehicle lighting arrangement and the towed vehicle was identified. This would eliminate the extra parts that I did not need and help the customer complete the task. Other than that, very good product. I guess it is better to have extra parts ratter than not having enough but I just thought this might cut the cost for some applications.
by: Jerry07/29/2021
Ford Ranger
Install on a 2020 Ford Ranger. The product was excellent. The only problem I had was trying to remove the nuts holding the front bumper on. Ford has these bolts embedded in a hard plastic frame that spaces the three bolts on each side. In trying to remove the nuts I got them started then they would neither come on off nor reinstall. The nuts were spinning the bolts. After thinking about the fix I was in I decided to cut the factory bolts off and replace them with 1/2" x 1 1/2" bolts with fender washers. I tried a sawsall with a metal cutting blade and the bolts ate the teeth right off. I put on a Milwaukee thick metal cutting carbide tooth blade and that did the trick. Other than that, which is Ford's fault, everything went as the etrailer videos showed. If you are doing this make sure to spray the exposed bolt threads with WD-40 or something like before you try to remove the nuts.
by: Ron B05/23/2017
2015 Fiat 500
The kit contained all you need to wire lights on a Fiat. The instructions were clear and concise. Excellent product and service as usual for etrailer.
Ron B.
5/25/2018
After one year this kit is still doing its job flawlessly.
by: Dale05/06/2016
This is my second purchase of wiring kit for towed vehicle I have bought from Etrailer. I had some questions and Etrailer was able to answer every question I had. I will go back to Etrailer next time I need products such as this.
by: David10/28/2017
2010 Suzuki Grand Vitara
A great product. Installed easily. Previous wiring experience would be good for somebody wanting to use this.
It has performed flawlessly over the past year. I’d recommend it.
David
10/28/2018
Fantastic. No problems at all. Works as required every time I plug in.
by: Rich B.06/02/2012
2012 Kia Sportage
This harness was an excellent choice. It took about an hour and fifteen minutes to install. Everything is spelled out for you in the instructions and if all else fails, watch the online video. The hardest thing was removing the tail light on the Sportage. I has a ball joint connection that forces you to pull harder than you think you should. I was afraid I would break the light. But it popped out and the rest was easy. Very complete and works great! The connections fit like factory. Very Pleased.
by: only1jerry11/05/2016
2005 Subaru Forester
I did a lot of research before buying. etrailer's prices and support are above average. I ordered the Roadmaster 913-1 baseplate, Falcon-2 towbar and 154 universal lighting kit. I was completely surprised by the fast shipping, all parts arrived 3 days before I expected AND the shipping was free!
Before I ordered I talked with etrailer support to ensure I ordered the correct parts. They were knowledgeable and helpful.
by: John D07/29/2021
Was skeptical about using with led tail lights,but it all went well. The installation videos are spot on. After one year and about 12k miles traveled, no problems. My vehicle is a 2020 Ford Ranger.
by: James04/17/2021
Works as advertised. Design of these wiring kits is based on converting the common 3 bulb brake/turn signal systems to a 2 bulb system. This makes them unnecessarily complicated.
by: Wayne06/06/2015
Product arrived on time.Online videos very well done.Katie D. provided excellent customer service on all the parts ordered.
Wayne S.
6/11/2016
very happy with product still working without any problems
by: Dave G.07/28/2015
2008 Honda Fit
Very complete, hi quality, reasonably priced kit for lighting my "toad". If you have combined lights on your RV and separate lights (brake and turn) on your "toad", this is the kit.
by: Cliff H06/04/2014
They wiring kit was just what we needed for our application. It works really well and seems good quality.
by: Mike03/29/2017
Nice set up. Instructions were spot on. The hardest part of the installation was removing car interior panels to get to the wiring. Would definitely recommend this product.
by: Kevin 04/27/2021
Contained everything I required except the independent stop light switch.
by: Greg R.12/18/2016
Customer service was the best. Product delivered as expected. I recommend this wiring package. My towing safety comes first and Etrailer delivered.
25
56
Show More Reviews
See what our Experts say about this Roadmaster Flat Tow Wiring Harness
- Parts Needed to Flat Tow a 2021 Ford BroncoWe can help you out with that! In order to flat tow your 2021 Ford Bronco behind your 2022 Newmar Class A motorhome you will need at least 5 main parts. Those parts are a base plate kit, tow bar, safety cables, tow bar wiring and a supplemental braking system. I have included each of those parts below, along with a brief description of their purpose. Base Plate Kit: This is a custom fit part that provides attachment points on your Bronco for the tow bar to use. - Roadmaster Direct-Connect...
view full answer... - Flat Towing Set Up for 2013 Fiat 500I would be happy to help you set up your 2013 Fiat 500 for flat towing. You can only flat-tow your Fiat if it has a manual transmission. If you have an automatic transmission you will need the Demco Kar Kaddy X Tow Dolly w/ Disc Brakes - Tilt Bed Frame - 4,800 lbs - Wide Tread item # DM9713093. You are going to need a tow bar, base plate kit, wiring harness for lights, supplemental braking system, a battery charge line, stop light switch, and potentially a high low adapter. If you don't...
view full answer...
- Roadmaster Flat Tow Setup For 2022 Ford Escape Plug In HybridWe have a fit for your vehicle. I will list the main items you will need to complete your set up. Roadmaster has confirmed that these will fit on you 2022 Ford Escape Hybrid Plug in. **Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM39FR. **Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar for Blue Ox Base Plates - RV Mount - 8K # RM-677. **12 Volt Outlet Kit, 20 amps # RM-9332. **Roadmaster 6-Diode Universal Wiring Kit for Towed Vehicles with Separate Lighting # 154-792-118158. **Roadmaster...
view full answer... - Is Brake Lite Relay Required for Use with 6-Diode Tow Bar LightingWith a 6 diode tow bar lighting kit like the # 154-792-118158 you would never need to use a Brake Lite Relay part # RM-88400. The Blue Ox kit you referenced would not be necessarily a 6 diode kit so it would not be what you need unless you wired it up like a 6 diode kit.
view full answer... - Base Plates, Wiring, Braking to Flat Tow a 2003 Honda CR-V Behind a Motor Home with Falcon Tow BarBase plates are vehicle specific so you will need to get some for your 2003 Honda CR-V. But first, go ahead and check the owners manual for any additional important information on flat towing it. For base plates, you can use # 1541-1 if your CR-V does NOT have a brushguard. If it does have a brushguard use # 1541-3. Since you have used the Falcon Tow Bar before, you may not need to add safety cables if you already have some. If you do need safety cables use # RM-643. You will also need...
view full answer... - Parts Needed to Flat Tow a 2011 Mini Cooper S Convertible Behind an RV with Roadmaster Eagle Tow BarSince you have a 2011 Mini Cooper Convertible S model you can use Roadmaster base plates # 521879-1A. They are compatible with Quick Disconnects (found on some Roadmaster tow bars) and all Roadmaster tow bars. Base plates # 521880-1 do not fit the design of the Convertible S models. In addition to the tow bar you have and the base plates you will also need safety cables (unless you already have some), lighting, and supplemental braking. for safety cables I recommend # RM-643. The coiled...
view full answer... - Correct Base Plate Kit for Towing a 1995 Toyota Tacoma with a Roadmaster Falcon 2 Tow Bar RM-525The # 1133-1 Roadmaster base plate kit you referenced is a fit for the 4WD models of the 1995 Toyota Tacoma but you would need an adapter to use it with a Roadmaster Falcon 2 5250 tow bar, our part # RM-525. To make things easier, get the Blue Ox base plate kit # BX3728, as this will connect directly to the tow bar without need for an adapter, and it is also a custom-fit for your vehicle. For a simple wiring solution, you could use a magnetic light kit such as part # RM-2120. The Roadmaster...
view full answer... - Complete Flat Towing Set Up for a 2021 Mini Cooper 4 Door I would be happy to help you set your 2021 Mini Cooper 4 door up for flat towing. To start out with you're going to need a base plate kit. You will want the Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-521884-5. This fits the convertible and hardtop - S models and the base model. The hidden bracket design provides improved aesthetics compared with standard brackets. I have attached a picture below of what this base plate kit will look like with the arms removed. Next...
view full answer...
- Can Bulb and Socket Flat Tow Wiring Fit a 1999 Jeep Cherokee SportThe Roadmaster Tail Light Wiring Kit for Towed Vehicles # RM-152-LED requires a 1" hole to install the bulbs into the tail light housing. It does look like you're limited on spacing inside your housing and when I reached out to my contact at Roadmaster he confirmed that we need to go with a different tail light kit for your setup. I recommend the Universal Hy-Power Diode Wiring Kit # RM-154 if the brake and turn signal are combined on your 1999 Jeep Cherokee Sport, or the Universal Wiring...
view full answer...
- Can Roadmaster Diode Tow Bar Lighting Kit # 154-792-118158 Activate Vehicle Third Brake LightYes, if you wanted the Roadmaster trailer wiring diode kit part # 154-792-118158 to activate the third brake light of your vehicle you would just need to run the red wire to the third brake light and it activate the third brake light.
view full answer... - Recommended Tow Bar Wiring For 2013 Honda Fit Being Flat-TowedThe Curt T-Connector Vehicle Wiring Harness, part # C56011 is designed to work with your Honda Fit to tow a trailer behind the vehicle. This harness is not designed for operating the lights on your Fit while it is being towed. For that you would need tow bar wiring. When you flat-tow your Honda, you will need kit like part # 154-792-118158. This is a diode kit and includes the converter needed for your Honda with separate wire(meaning the brake light bulb is separate from the turn signal)....
view full answer... - Diode Tow Bar Lighting Kit for 2022 Kia Soul That is Flat TowedVehicles with separate taillights can be wired for flat towing like a combined vehicle with a diode kit like the # RM-15267 and the brake lights will flash like turn indicators when blinkers are on and the brake signal will not override it. This is the simplest way to wire up a vehicle like this and would be what I would do. But we do have kits that allow you to wire up the tow vehicle with separate taillights and use the amber lights as blinkers with the # 154-792-118158.
view full answer... - Parts Needed to Flat Tow a 2012 Fiat 500 Behind a Motor HomeI went out to the warehouse and opened up a box of the Blue Ox base plates # BX2801. They do indeed have removable tabs! We are going to take new pictures to show all the parts including the tabs. In addition to the base plates you will also need a compatible tow bar. I recommend the Alpha # BX7380. It is rated for up to 6,500 pounds and includes safety cables. I have linked a review video for you. For lighting you can use a magnetic kit such as # RM-2120 or for a more permanent solution...
view full answer... - Can Roadmaster Diodes Be Purchased SeparatelyYes, the diodes of the Diode Kit part # 154-792-118158 are available separately. They are available individually in the part # RM-790. If you need 6 like what the # 154-792-118158 has you would need to order a quantity of 6.
view full answer... - Flat Towing Wiring Harness Options for 2012 Fiat 500There are two ways you could wire your Fiat 500 for flat towing. In scenario # 1, you could use a 4 diode kit like # RM-15247 which would use your tail lights as stop/turn/brake lamps. Your lights would work normally when actually driving the Fiat, but when you're flat towing, you'd only use the red bulb on the back of the Fiat for all the taillight functions. Scenario # 2, if you wanted the taillights on the Fiat to operate 'normally', that is to have the turn signals use the amber bulb...
view full answer... - Parts Needed to Flat Tow a 2011 Mini Cooper Base ModelFor your 2011 Mini Cooper hardtop base model the correct Blue Ox base plate kit is the part # BX1307 which is a confirmed fit. Next you will need a compatible tow bar. The tow bar I recommend the most is the Alpha, # BX7380. This tow bar does include another item you will need, safety cables. I have linked a video review of the tow bar as well. Next you will need lighting. For lighting you have some options. If you want something that installs quickly and does not splice into the vehicle...
view full answer... - Recommended Parts Needed To Flat-Tow 2013 Honda CR-VWhen you flat-tow your 2013 CR-V you will need 5 items. You need base plates, tow bar, safety cables, lighting for the CR-V, and most states now require a supplemental brake system. I have attached a link to a helpful article that explains flat-towing you can check out. I recommend Falcon All Terrain Tow Bar, part # RM-522. The adjustable arms on this tow bar allow you to easily attach and release your CR-V. That is the advantage over the Falcon tow bar, part # RM-520. Both of these tow...
view full answer...
- Towing Wiring Harness For Mercedes Sprinter 2500We do not recognize this connector that you have provided a picture for but we have a solution. We do not have an adapter to go between that plug and a 7-way connector. However you can create your own 7-way jack for your trailer to plug into. You will need to install a Tekonsha # TK22115 wiring harness that includes the 7-way connector for the back of your Sprinter. If you will be towing a trailer with brakes, you will additionally need the Tekonsha # 90195 brake controller. This installs...
view full answer...
- Base Plates And Wiring Recommendation For Flat-Towing A 2015 Ford ExplorerThe Roadmaster MX Base Plate Kit, part # 4427-3A is designed to work on your 2015 Explorer if the towbar you have is a Roadmaster Sterling, Blackhawk, Blackhawk 2, Falcon and Falcon 2. The MX base plates will not work with tow bars that require a hitch ball. If you have separate brake and turn signals on your Explorer, the Roadmaster Tow Bar Wiring, part # 154-792-118158 will work great for you. This includes everything needed to wire your Explorer for flat-towing. Since you have done...
view full answer...
- Parts Needed to Flat Tow a 2011 Mini Cooper Behind a Motor HomeThe Blue Ox base plates # BX1307 are indeed a fit for your 2011 Mini Cooper. In addition to the base plates you will also need a compatible tow bar, safety cables, lighting, and supplemental braking, which you have mentioned. I have linked the installation instructions for you. For a compatible tow bar the most popular option is the Alpha, # BX7380. This tow bar also includes safety cables so you would not need to get additional cables if you choose this tow bar. For lighting, if you...
view full answer... - Troubleshoot Vehicle Taillights Not Working with Tow Bar Diode Kit Installed When Plugged into RVWhen you plug the tow bar wiring # 154-792-118158 into your tow vehicle the diodes of the kit will prevent the Jeep from having control of them if the signal from the tow vehicle is being applied. This is a function of the diodes designed to prevent the circuit from backfeeding onto the vehicle's wiring circuits. If they are not working at all with the tow vehicle plugged in you will want to first verify that all the connections you made are secure. After that use a circuit tester to test...
view full answer...
- Best Parts to Flat Tow a 2019 3500 Chevy Silverado 3500 DieselYou'll want to verify in your 2019 3500 Chevy Silverado High Country Duramax owner's manual that you can flat tow before attempting to do so as specific models require different setup steps or do not allow flat towing at all. Tow Bar: Since you say you have a 10k rated tow bar I assuming you have the Blue Ox Avail Tow Bar - Motorhome Mount - 10,000lbs Item # BX7420 as it's the only 10k tow bar we carry. If this is not the case you may need an adapter for the base plates I've recommended...
view full answer... - Can Roadmaster Base Plates Be Used With Blue Ox Aventa Towbar To Tow 2013 Honda FitIn order for you to be able to use your Blue Ox Aventa Tow Bar BX7335 with the Roadmaster EZ Base Plate Kit, part # 521190-1, you will need to use an adapter. We carry the Blue Ox Tow Bar to Roadmaster Standard, EZ and XL Base Plates Adapter, part # BX88178 that will work for your towbar and the Roadmaster base plates. Since you have a towbar, you may be familiar with towing a vehicle, but in case you are new to flat-towing I have attached some helpful articles that explains flat-towing...
view full answer...
- Is Cable to Connect Motorhome and Flat-Towed Vehicle Included in Diode Kit # 154-792-118158The Roadmaster Tow Bar Wiring Kit # 154-792-118158 that you referenced includes all required diodes, connectors and wiring to set up your Honda Fit for flat towing. The longest cable in the kit, the 30-foot flat connector harness, will run from the rear of the Fit up to the front of the car; it should be positioned near the center of the vehicle to avoid being pulled when the motorhome turns. This 4-pole is where the toad and motorhome will connect to each other. I have included links...
view full answer...
Do you have a question about this Flat Tow Wiring Harnes?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Sue W
Written by:
Lindsey S
Updated by:
Adele M
Updated by:
Rachael H
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
Video by:
Andrew L
Video by:
Alan C
Video by:
Chris R
Installed by:
Cole B
Installed by:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jerry B.
2/2/2015
So far, so good. Weve only towed the car one way from KS to Fl. Everything working great. Thinking about adding a receiver hitch but, will take it to the dealer as we sold our farm, and our tools and have the grandsons arent available to do the hard work.