Magnetic LED Tow Light Kit - Weatherproof - Red Lens - 20' Wiring Harness - Qty 2

See what our Experts say about this Optronics Tow Bar Wiring

• Lighting Options for 2016 Lincoln MKX that Is Flat-Towed Behind Motorhome
  It sounds like you need a flat-towing wiring harness to allow your motorhome to control the lights on the towed MKX. There are several options for flat-towing lighting and these vary in cost, complexity of installation and in how permanent that installation is. With a brand new vehicle like your MKX you can consider a set of magnetic lights like # TLL21RK, which uses a 4-pole flat type connector. This kind of lighting kit means you do not have to cut into the brand new car's wiring or...
  view full answer...
• Tow Bar Adapter to Adapt Blue Ox Base Plates # BX1675 to Roadmaster Stowmaster Tow Bar # RM-501
  The Roadmaster/Blue Ox adapters you referenced, parts # RM-031 and # RM-031-5, do not fit the Stowmaster tow bars. The Blue Ox base plates # BX1675 for your 2008 GMC Acadia are designed for use with motor home mounted tow bars and not car mounted tow bars like the Stowmaster. Further, your 2008 Acadia may weigh too much to allow use of any tow bar adapters, which are only rated for use with vehicles up to 5000-lbs. A better and safer option is to use a directly-compatible Blue Ox tow...
  view full answer...
• Solution for Blocked Tail Lights When Using Thule EasyFold XT Bike Rack
  I do have a solution for you, but Thule doesn't offer a light kit specifically designed for your EasyFold XT bike rack, # TH903202. One option is to use the LED Light Kit # 98174LED along with two mounting brackets # BK70BB . This would most likely require permanent modifications to your EasyFold though, since you'd need to drill holes to mount the lights on the rack itself. You could try to use zip ties to attach the mounting brackets to your bike rack, but it wouldn't be the most secure. A...
  view full answer...
  
• Parts Needed to Flat Tow 1997 Jeep Wangler TJ
  A braking system like your Ready Brake and a tow bar like your Ready Brute are two of the items needed for safe and legal flat towing. The other components include safety cables, a wiring/lighting kit, a high/low hitch adapter to keep the tow bar level when it is connected and either base plates on the towed vehicle or a tow-rated aftermarket bumper. Base plates and adapters for the 1997 TJ appear on the linked page and the right one depends on the bumper setup. You can use the drop-down...
  view full answer...
• Will The Roadmaster StowMaster Tow Bar Work on a 2010 Hyundai Tucson?
  To use your Roadmaster StowMaster # RM-501 on your 2010 Hyundai Tucson you will need to find a Roadmaster base plate kit 1628-1 as we no longer carry this. If you are unable to find this I recommend using the Demco Base Plate # DM9518277 with our etrailer SD Non-Binding Tow Bar # e34ZR. You will need a Wiring Kit # RM-15267 if you do not already have Magnetic Tow Lights # TLL21RK you use with your other vehicle. A braking system like the Brake Buddy Select 3 Portable Supplemental Braking...
  view full answer...
• LED Tow Bar Lighting Kit that Could be Used on Trailer or Flat Towed Vehicle
  Sounds like you are looking for a set of LED magnetic tow lights like the part # TLL21RK that you referenced. This is only way to add temporary lights to a trailer or flat towed vehicle like you mentioned and is LED like you want as well.
  view full answer...
• Which Tow Bar Light Kit for Flat-Towing 2011GMC Acadia
  The RoadMaster Bulb and Socket Set for Tail Light Wiring Kits, part # RM-155-2, is not compatible with your Acadia lighting system. These incandescent bulbs will not fit in your tail light housing due to the presence of the circuit board that powers the Acadia's LED lights. Also, they would generate much more heat than the specified LED bulbs and might interfere with the nearby circuitry. If you will be towing your vehicle only on occasion, you may want to consider a magnetic towing light...
  view full answer...
• Recommended Components For Flat-Towing 2013 Hyundai Elantra With Motorhome
  To flat-tow your Hyundai Elantra behind your motorhome you will need 5 items. You will need base plates, a tow bar, safety cables, lighting for the Elantra, and most states now require a supplemental brake system. If your Elantra is not a GT the Blue Ox base plates, part # BX2331 would work well. The tow bar that would also work well is the Blue Ox Alpha Tow Bar, part # BX7380. This tow bar is designed with a motor home mount and will work well with the BX2331 base plates. This tow bar...
  view full answer...
• Recommended Magnetic Towing Lights For 2015 Volkswagen GTI On Tow Dolly
  I recommend using magnetic lights like part # TLL21RK. These have a 4-way harness and since these have red LEDs you have much less current draw than using incandescent. These lights have a 20 ft long harness and also a 4-way connector.
  view full answer...
• Which Type of Flat Towing Lighting Set-Up to Use for 2011 GMC Terrain
  The easiest type of flat towing lighting kit is the magnetic type like the Optronics # TLL21RK. These take only moments to install and are easily removed and stored when you're not flat towing. They require no alterations to your vehicle. A more permanent installation is a bulb-and-socket kit like # RM-155 from Roadmaster. This kit includes new wiring and separate bulbs that install inside the vehicle taillight assemblies. These remain electrically separate from the vehicle's internal...
  view full answer...
• Parts Need to Flat Tow a 1986 Jeep CJ-7 Behind a Chevy Tahoe
  The best option for base plates on your 1986 Jeep CJ7 is the Blue Ox bolt-on base plate bracket kit # BX88230. The capacity is 5,000 pounds. Since this is a custom installation the bumper may need to be reinforced. Please view the included instruction link. I also recommend the Blue Ox tow bar # BX7380 as it has a 6,500 pound capacity. The swivel function feature makes it very easy to connect your vehicle, even on uneven terrain. Safety cables are essential when using a tow bar system...
  view full answer...
• Why Can Optronics Magnetic Tow Lights Only be Used with Vehicles Under 80 Inches
  There are certain lighting requirements for vehicles or trailers that are over 80 inches wide that magnetic lights such as # TLL21RK cannot provide. You would need front and rear clearance lamps that are mounted at a 45 degree angle (PC rated). So if the back of the vehicle was a square for example, the light would be at the corner pointed half way between the side and the rear of the vehicle. They need to be placed as high as possible. You also need rear identification lamps (3) centered...
  view full answer...
• Will Optronics LED Magnetic Tow Lights Protect Against Scratching 2018 Ford Fiesta SE Paint?
  The Optronics Magnetic LED Tow Light Kit - Weatherproof - Red Lens - 20' Wiring Harness - Qty 2 # TLL21RK has a protective label pad on the bottom to keep from scratching paint. You can see this at the 2 minute mark of the attached review video. I do recommend wiping down the vehicle with a microfiber cloth before putting the lights on simply to remove any dust or debris that could be abrasive between the scratch free label and the paint for added security.
  view full answer...
• Parts Needed to Flat Tow 2010 Hyundai Elantra with 38-ft Motor Home
  Flat towing a car behind a motor home requires 5 basic items and each one is detailed in the linked article. Let's start with base plates for your Elantra. The correct one for you depends on which version you have. You can use the linked page to see all base plate fits for the 2010 Hyundai Elantra; just select the version you have using the drop-down menu tool. If you have the sedan use # BX2325; if you have the Touring Hatchback use # BX2328. For a tow bar I recommend the Blue Ox Alpha,...
  view full answer...
• Tail Lights Covered By Bike Rack Solution
  The lights on the Demco Tow Lights w/ Wiring Harness # DMKKLB do not adjust from the vertical 180° position. The feet on # DMKKLB do adjust positions left and right for different angles. I recommend using the Roadmaster Standard Magnetic Tow Lights # RM-2120 to alleviate your blocked tail lights. The harness plugs into your 4 way flat trailer harness and uses magnetism to secure to the back of your vehicle. If you have nothing for the magnets to stick too, you can use # 3378895404 to fix...
  view full answer...
• Adapting 6-Pole Square RV Connector to 4-Pole Flat Connector for Use With Optronics Lights # TLL21RK
  There is no plug-in adapter available to mate a 6-pole square RV connector directly to a 4-pole flat connector, but we do offer a 6-Pole Square Trailer Wiring Connector Kit, part # 37995, that can work for you as long as you do not have a Jayco RV (which can have compatibility issues with this part). Hopkins Connector Kit # 37995 includes both male and female connectors. You can cut off the 4-pole flat connector from the MaxxTow Magnetic Light Kit and splice in the male 6-pole connector...
  view full answer...
  
• Can 2000 Kia Sportage with Manual Transmission be Flat Towed
  I took a look at the online owner's manual for your 2000 Kia Sportage and was able to find that the manual transmission model can indeed be flat towed behind an RV with all four wheels on the ground. I do recommend verifying this information in your copy of the owner's manual, along with reading through the specific steps and parameters to take before proceeding. In order to flat tow your vehicle, you will need a base plate kit, tow bar, safety cables, a lighting solution and a supplemental...
  view full answer...
• Recommended Temporary Brake Lights For 10 Foot Box Truck
  I recommend to use Magnetic LED Tow Light Kit - Weatherproof - Red Lens - 20' Wiring Harness part # TLL21RK which plugs into a 4-way connector on the truck. The lights will act as running, brake lights and turn signals once plugged in. However, they are designed for flat towing a vehicle so you may consider checking into the laws of your state before using these on the box truck just to be safe. If you do not have a 4-way connector please let me know the year make and model of the truck...
  view full answer...
• Recommendations When Flat-Towing 2014 Ford Focus With Automatic Transmission
  There are 5 main items you need when you are planning on flat-towing your 2014 Ford Focus. You will need base plates, a tow bar, safety cables, lighting on the vehicle, and most states now require supplemental brake systems. For your Focus I recommend the Roadmaster EZ5 Base Plates, part # RM-524430-5. When you are not towing your Focus and you remove the front arms, the system is nearly invisible. The tow bar I recommend is the RoadMaster Falcon 2 Tow Bar, part # RM-520. This tow bar...
  view full answer...
• Least Expensive Way to Carry Two 75 Lb Electric Bikes on 2016 Ram 1500
  I have a suggestion for you, but unfortunately, we're not going to have a hitch mounted bike rack for electric bikes that's going to fit into your budget. Most of our e-bike racks max out at 60 lbs per bike, so your least expensive options are going to be either the Swagman E-Spec # S94FR, with a capacity of 70 lbs per bike, or the Hollywood Racks Sport Rider SE # HLY74FR, with a capacity of 80 lbs per bike -- both over budget. If you're able to utilize your truck bed to carry your e-bikes,...
  view full answer...
  
• Lighting Options for Flat-Towing 1997 Jeep Wrangler With a Truck
  There are several options for lighting kits to allow flat-towing a vehicle. These range from the easiest-to-install and remove magnetic types, to independent bulb-and-socket kits that bypass the dinghy's wiring to hard-wired diode kits that require cutting into the dinghy's wiring. For ease of installation the magnetic type will be preferred as these require no alternation of the towed vehicle; they are also a cost-effective option. For example, Optronics offers their # TLL21RK 20-Foot...
  view full answer...
• Base Plates Recommendation For 1994 Chevrolet S-10 Pickup To Use With Falcon Tow Bar
  Since you said you have a Falcon Towing Kit, I assume you mean you have the Falcon or Falcon 2 tow bar made by Roadmaster. Base plates are designed to fit specific vehicles. The base plates that are designed to fit your 1994 Chevrolet S-10, are part # 179-8. Once you remove the drawbars, the brackets are almost invisible. There are a total of 5 items needed when flat-towing a vehicle. You need the base plates for the towed vehicle, a tow bar which you said you have, safety cables, lighting...
  view full answer...
• Best Bracket and Light To Add To Hollywood Bike Rack
  I recommend to use the 6-1/2" oval bracket part # BK70BB with the lights of the LED light kit part # 98174LED because the 6" oval will be a tight fit. They will fit perfectly into the 6-1/2" oval bracket with the grommets on the light. I have attached a photo for your reference. The brackets will require self tapping screws or zip ties to hold them on. Another option is to use the Magnetic LED lights part # TLL21RK on the vehicle itself instead of trying to attach them to the bike rack....
  view full answer...
  
• Parts Needed For 1996 Jeep Grand Cherokee Base Plate Recievers
  It sounds like you have most of what you need to flat tow your 1996 Jeep Grand Cherokee. To flat-tow any vehicle you need base plates, tow bar, safety cables, wiring for lights, and braking system. The base plate you have is the Roadmaster XL, Item # 1528-3. Unfortunately, this base plate kit is not a confirmed fit for your vehicle. Each towed vehicle needs specific plates that mount to it so that the flat-towing is safe for it and the RV. The Roadmaster XL Base Plate that is a confirmed...
  view full answer...

Do you have a question about this Tow Bar Wiring?