Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness

See what our Experts say about this Peterson Tow Bar Wiring

• How Tall Is The Peterson Magnetic Tow Lights
  The Peterson Magnetic Tow Lights # PE26UR is an acceptable solution if your tail lights are blocked as these lights provide stop, left/right turn signals, as well hazard functionality; additionally, these lights are approximately 6.9 inches tall. Additionally, you may want to try the Curt Auxiliary LED Indicator Lights # C53201 which are specifically designed for this.
  view full answer...
• Will the Peterson Magnetic Tow Lights Part # PE26UR Scratch My Paint
  The Peterson Magnetic Tow Lights part # 73864 are designed so as not to damage your car. It is important that you attach them to a clean surface.
  view full answer...
• Most Cost-Effective Way to Flat or Dinghy Tow a 2020 Ram 1500
  I'm glad you know that there is going to be a certain cost associated with flat towing (also called dinghy towing) your 2020 Ram 1500, but there are certain ways you can save money while still being both safe and comfortable. There are a number of parts you'll need, starting with base plates, the Roadmaster Direct-Connect Base Plate Kit # RM-522203-5 (fits all but Rebel models of '20 Ram 1500), which also needs a compatible tow bar, with the Roadmaster Falcon 2 Tow Bar # RM-520 being...
  view full answer...
• Recommended Secondary Light System for use When Using Bike Rack with Cover
  I have a solution for you, but there isn't a directly compatible or solution designed specifically for the Thule EasyFold XT # TH903202. However, you could definitely use something like the Peterson Magnetic Tow Lights - 4-Way Flat Connector - 20' Long Harness # PE26UR if you've got a 4 way wiring harness on the back of your 2020 Mercedes-Benz GLE. These are magnetic towing lights that could be attached to the carrier or your vehicle to provide stop, turn, and tail light functions. If...
  view full answer...
• Wire Color Identification of Tow Bar 4-Way Wiring for Splicing in Additional Lighting
  The green wire of the 4-way connector you sent in a picture of is the right turn/stop circuit, the yellow is left turn/stop, brown is running light, and white is ground. You could use the # 18252 to easily splice into the circuits as well to make an additional connector.
  view full answer...
  
• Base Plates and Accessories to Flat Tow 1991 Mazda Miata with Pace Arrow 37C
  Assuming that you're using a Blue Ox tow bar, the parts you've mentioned would all be compatible. The # PE26UR lighting system would work well for your application. You'd also need safety cables like part # RM-645 if you don't have them already. Most states also require that the flat towed vehicle be equipped with a supplemental braking system, like theBlue Ox Patriot 3 # BLU37TR. I'll link you to some articles about flat towing that you might find helpful.
  view full answer...
• Base Plates for Flat Towing 2014 Ford Fusion SE Hybrid
  The base plate fits for your 2014 Ford Fusion Hybrid will depend on the version of the vehicle that you have. If you have the SE model (with no adaptive cruise control) you can use Blue Ox Base Plate Kit # BX2646. All base plate fits are shown on the linked page. Select your SE Hybrid vehicle style from the drop-down menu to see your options. (Choose either SE Hybrid with adaptive cruise control or without it.) The linked article on flat towing will give you information on all of the...
  view full answer...
• Parts Needed to Flat Tow 1991 Dodge Dakota
  Typically when it comes to older vehicles if they have a manual transmission you can generally tow them, but it's always best to confirm that in your owner's manual or with your local dealer if you're fresh out of a manual. If you are able to flat tow your 1991 Dodge Dakota then I recommend using the following parts: Roadmaster Crossbar-Style Base Plate Kit - # 210-1 StowMaster Tow Bar - # RM-504 (fits 2-5/16" hitch ball - be sure to use a ball mount that allows the tow bar to sit level) Safety...
  view full answer...
• Magnetic Towing Lights With 4-Way to Replace Damaged Set
  We do carry magnetic towing lights that connect with a 4-way like the ones that were damaged with the lost cap, but no replacement lenses. So, the best option is going to replace yours with a similar set from Optronics or Tow Ready. - Optronics Magnetic Tow Lights # TL21RK - Tow Ready Magnetic Tow Lights # PE26UR I have added links below to video reviews of both options for you to take a look at.
  view full answer...
• Recommended Removable Flat Tow Light Kit For 2016 Jeep Wrangler Soft Top
  I may have another option, but we do not carry the Custer Ez Mount EZT20B that use a mounting flap. We have had customers use the Peterson Magnetic Tow Lights # PE26UR on their Jeeps by attaching the magnet to the body right next to the tail light housings. I included a picture of the lights used this way on a Jeep Wrangler for you to take a look at. This would be a great removeable option for your 2016 Jeep Wrangler with a soft top as it would still allow you to easily remove the lights...
  view full answer...
  
• Can Automatic Transmission 2012 Ford Focus Be Flat Towed
  I did some checking and it looks like the automatic transmission 2012 Ford Focuses can be flat towed as long as you keep it under 70 MPH. I would still recommend checking the owners manual for recommendations on this as well. For a base plate kit you would want the part # RM-524430-5 which is a confirmed fit for your vehicle. See install video. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle....
  view full answer...
• What Pound Rating are the Magnets of the Peterson Magnetic Tow Lights
  The Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR have a 35-40 lb pull force rating. The kit weighs less than 3 lbs so the magnets are very strong in comparison to the weight.
  view full answer...
• Flat Towing a 2016 Chevy Sonic Behind a Motorhome
  To flat tow your 2016 Chevrolet Sonic you're going to need several items. For starters, I recommend the Roadmaster Sterling Tow Bar # RM-576 which connects to your RV by your trailer hitch receiver. It's non-binding, making it easier to connect to your Sonic and the Alpha comes with safety cables. Next you'll need the Roadmaster base plate kit # RM-523173-5 which is compatible with your Sonic. It's fairly easy to install, with no welding and is barely noticeable when the arms are...
  view full answer...
• Lighting Functions and Extension Cable for the Peterson Tow Light Kit
  The Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness Item # PE26UR, provides stop, turn and taillight functions for flat towing. If you need an extension There are several options depending on the length that you need. If 48 inches would be long enough you can use the 48-inch Car and Trailer End Loop, # 18044. If 60 inches is needed use the 60-inch Car and Trailer End Loop, # 18045. If you need a custom length wire you could purchase a 4-Pole Trailer End Connector,...
  view full answer...
• Magnetic Tow Bar Lighting Recommendation for 2016 Ford F-150
  The tow bar lighting kit part # PE26UR that you referenced is a universal kit that can basically fit any vehicle, and it attaches to any metal surface with a magnet. You could also take a look at the part # TL21RK which is also a universal kit that could easily attach to the bumper or bed rails or any magnetic surface.
  view full answer...
• Parts Needed to Flat Tow a 2014 Chevy Silverado 1500
  A complete flat towing setup consists of base plates, a compatible tow bar, safety cables, tow bar wiring, supplemental braking and, when needed, a high/low adapter. You'll also want to consult the vehicle's owners' manual for any specific instructions to follow to get your vehicle prepared for flat towing. For base plates I recommend using the Demco Classic Base Plate Kit - Fixed Arms # DM9518200, which will give you a durable base plate with a heavy duty powder coating at a nice price...
  view full answer...
• Installing MaxxTow # MT70097 Magnetic Mount Tow Lights Permanently on Vehicle
  The Peterson # PE26UR Magnetic Tow Lights could be modified by doing some cutting and splicing to work as you describe. You would attach the connector of the wiring harness at the front of the vehicle and run the wiring under the vehicle. Following the frame member or an existing wiring harness works best. Run the wires to the rear of the vehicle, being sure to avoid any suspension and steering components that might move or anything hot like the exhaust system. Under the vehicle at the...
  view full answer...
  
• Is Roadmaster Diode Wiring Kit # RM-154 Needed When Flat Towing a 2013 Ford Fiesta
  The battery needs to be disconnected when flat towing a 2013 Ford Fiesta with the automatic transmission because the transmission is shifted electrically. If the battery is left connected it could shift the transmission into the wrong gears when being flat towed and damage the transmission. The manual transmission of the Fiesta does not require disconnecting the battery. The diode kit like the Roadmaster Diode Wiring Kit, part # RM-154, is used to connect your lighting on your RV to the...
  view full answer...
• Parts Needed to Flat Tow a 2011 Nissan Versa
  A complete flat towing setup typically consists of base plates, a tow bar compatible with your base plates, safety cables, tow bar wiring, supplemental braking and a high/low adapter; it sounds like you already have a supplemental braking system but we can help you locate the other parts. Typically your base plates will dictate your tow bar, and you have 2 options for base plates in the Roadmaster # 52347-1 and the Blue Ox # BX1845. Both provide you with removable arms so that your vehicle...
  view full answer...
• Parts Needed to Flat Tow 2017 Honda HR-V Behind Class C Motorhome
  We can help you equip your 2017 Honda HRV for flat towing behind your motorhome, and there are a number of different parts you will need in order to do this. For base plates I recommend the Roadmaster EZ5 kit # RM-521570-5 that you referenced. This bracket will accommodate any Roadmaster motorhome-mounted tow bar. I recommend their Falcon 2 tow bar # RM-520. For safety cables use # RM-643. For a lighting kit I suggest an inexpensive magnetic light kit like # PE26UR or # TL21RK; these...
  view full answer...
• Recommended Tail Light Solution To Attach To A Cargo Net
  While there is not an option like what you're looking for, I do have another solution. Take a look at the: -Curt Auxiliary LED Indicator Lights # C53201. These lights measure 7" long and will utilize the same 4-pin style like # PE26UR that you're looking at. These lights are not magnetic, however with the shape of the lights being a bar you could easily use some zip ties # DW05724-10 to secure it to your cargo net. If you wanted a more permanent mounting option, that is also available...
  view full answer...
• Magnetic Tow Lights Stay on When Connected to 4-Pole Connector on Tow Vehicle
  It sounds like you have already been doing some troubleshooting which helps to narrow down the possibilities for us. What I recommend doing is testing both sets of lights with another vehicle. Even though it is unlikely that 2 sets of magnetic lights would be malfunctioning the exact same way at the same time, it is not impossible. You can verify that the lights are working properly by performing this test. If they need to be replaced, we have the Peterson Magnetic Tow Lights # PE26UR...
  view full answer...
• Can a 2013 Honda Fit Be Flat Towed
  I have a copy of the 2013 Honda Fit Owners Manual that I found online, and it states that both manual and automatic transmission equipped Fit models can indeed be towed behind a motorhome IF the specific procedures shown are followed. You can find this information by doing a Google search on '2013 Honda Fit Owners Manual'. Be sure to read the instructions carefully and completely, as they're pretty specific and if they aren't followed to the letter, you can damage the drivetrain of your...
  view full answer...
• Parts Needed to Flat Tow a 2007 Honda Fit Behind a Motor Home
  First, be sure to consult the Fit owners manual to determine if and how your Fit should be towed. Yes there are base plates for the 2007 Honda Fit from Blue Ox but only if it is a manual transmission. You would use # BX2252. For a compatible tow bar I recommend the Avail # BX7420. It also comes with safety cables. For a lighting solution I recommend the Roadmaster wiring harness # 154-792-118158. Most states now require a supplemental baring system on the vehicle being flat towed. I...
  view full answer...

Do you have a question about this Tow Bar Wiring?