Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
Item # RM-15267
Our Price: $146.43
Confirmed to Fit
2007 Dodge Ram Pickup
1500
2500
3500
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1284)
- Q & A (0)
- Photos
2007 Dodge Ram Pickup - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
Diode kit allows you to use your Dodge Ram Pickup's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 6-wire Flexo-Coil electrical cord.
Features:
- Lets you wire your vehicle to accept your RV's tail, brake, and turn signal lights for flat towing
- Wires towed car as combined system so that brake and turn signals travel along same wire
- Prevents electrical feedback and the damage it can cause to your vehicle's electrical components
- Diodes powder coated aluminum case is corrosion resistant and provides protection from the elements
- Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
- Flexo-Coil cord is resitant to water, oil, chemicals, and has silicone-injected plugs to prevent corrosion
- Center pin on 6-Way plug wired to 12V power, there are two industry standards
- Includes:
- 4 Hy-Power diodes
- 4-Wire harness
- 27" Long
- Wire connectors
- Cable ties
- 1 Ring terminal
- 3' Long plastic loom
- 8' Coiled cord
- Vehicle mounting bracket
- Socket
- Made in the USA
- Limited Lifetime Warranty
Specs:
- Diode Max amperage: 85 amps
- Diode Max voltage: 24 volts
- Coiled cord max length: 8'
- Coiled cord retracted length: 15"
Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes (RM-792) will be needed if you want to retain separate turn and brake signals.
Separate vs. Combined Lighting Systems
Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your vehicle will still function as designed when not hooked up to your RV.
Do You Need a Brake Light Relay?
Because this kit wires your vehicle as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
15267 Road Master Towed Car 4 Diodes RV Plug to 6-Wire Socket Flexo Coil Wiring Kit
Installation Details
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit - RM-15267
Average Customer Rating: 4.8 out of 5 stars (1284 Customer Reviews)
Diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 6-wire Flexo-Coil electrical cord.by: Dale04/13/2023
2014 Chevrolet Spark
Very complete kit. My only problem mounting it in a 2014 Chevy Spark is the limited space for the diodes. After much trial and fitting I found a suitable location. See photo.
by: Ken05/17/2024
This item was recommended by Jameson once he saw what I was planning to order for the tow bars and brake system. It was installed by a shop on the etrailer authorized installers list, along with everything else for the entire towing system. It does attach to both vehicles just fine, although at first I wasn't sure it was fully attached on the motorhome side. I was afraid it would just slide back out, but it hasn't.
by: Aaron03/31/2024
GMC Sierra
The wiring kit does what it is supposed to do. I would like to see all of the terminal connections to be the marine grade heat shrink type with the solder inside. The type that join the wires with a heat-gun. I installed this in a 2024 GMC Sierra Denali 1500. I chose to mount the connector by drilling an hole through the plastic front license plate. This will be covered with a flip-up license plate frame. All-in-all, I would purchase this set again.
by: Mike R.03/19/2024
Finished wiring and first effort to plug in red flex coil to the Jeep and the outside protection cover broke apart; very disappointing. Trying to contact Etrailer for replacement.
by: Barry 06/05/2024
This is my 2nd blue ox base plate from etrailer. Very good product and good service from etrailer, as always fast shipping
by: Russell 05/27/2024
Toyota Tacoma
2018 Toyota Tacoma TRD Sport 4x4 install, summer of 2023. This was simple to install. Easy to run along the underside of the truck and snake up into the taillights. Plenty of wire and worked fine when complete.
by: Gary04/12/2024
Haven't installed it yet, but the kit seems to include everything I need. My contact at etrailer did a great job of getting me exactly the right parts to complete my flat tow package, and the videos available on the web site to help with installation are a great feature. I don't think I would tackle this installation myself without all of the helpful information these folks provide.
Jenny N.
4/13/2024
Thank you for reaching out! I would love to see pictures and how your trip went once it is installed. Happy Trails Gary.
by: Dan05/08/2024
Worked great. I did have to get a bit more wire to reach my back taillights but I think that was due to a few poor choices in how the wire was run versus not enough material provided.
It did take me a bit to get the appropriate diode kits for my vehicle, but that wasn't a shortfall in this product.
by: Jen 04/13/2023
Jeep Liberty
Product matched description as expected. Needed for Jeep Liberty. Commented that if was for pickup truck, wire would not have been long enough. Instructions good and installed as expected.
Jen
6/2/2024
Still working as expected and got a lot of mileage on it over the past year. No complaints.
by: Fritz 04/26/2024
This seemed unnecessary but is really the only proper solution when working with LED taillights. It works perfectly.
by: John05/17/2024
This kit worked out well. It contained everything needed to tap into my vehicles lights and continues to be trouble free after a year of use.
by: Timmy04/11/2024
Jeep Wrangler
I've used this setup for a year towing a 2023 Jeep Wrangler . I 100% recommend it for anyone else. Under normal conditions it is very easy. Under stressful conditions (bad weather, uneven terrain, need to connect/disconnect quickly) it is a life saver.
I am 63 and I can connect/disconnect this in 5 minutes.
by: Bob05/23/2024
Worked fantastic.. after I received it I installed it and went from indiana out west. I have put around 9 thousand miles on it so far.
by: Tim 12/12/2023
2011 Jeep Wrangler
We added this kit and tow cable to keep our Jeep battery charged while towing, so the supplemental brake could stay powered. It has worked well for us for several long trips from GA to NH and MI. The Jeep side of the tow cable ended up with a crack in the metal plug, but we were able to get a replacement plug and rewire it pretty easily. We are going to complete the wiring for the tail lights before our next trip.
by: Dan 02/10/2024
I have to say : E trailer always delivers !
This is exactly what ya need if you are adding a second vehicle or swapping your old system to a new rig. I could have gotten by without the plug but for the price decided I should get a spare.
Delivery was prompt and product was exactly as described.
by: Gary12/06/2023
My Roadmaster Sterling tow bar has a channel for the wiring kit to run through. the coiled wire is not easy to work with on this bar if you want it to run through the channel. 10 months into using it the 6 wire end disintegrated and had to be replaced. luckily we were camped right beside a Camping World.
by: roparv03/06/2023
Installed as per video...I had a local car/truck accessory shop install mind as way too many facial screws for me to content with. $400 to have it done right.
(A little worried that if I get too close to a vehicle or wall that some damage my occur as cable connector and braking wiring sticks out 3-4 inches from front of car.) My older system was cleaner design across the front of the car.
by: Greg 02/23/2024
2011 Jeep Wrangler
The video instructions made this harness very easy to install (other than routing the wire to the back of the Jeep). Everything functions as it should. I'm very happy I went with this harness versus magnetic lighting.
by: Michael 02/02/2023
2014 GMC Sierra
great complete wiring kit for my 2014 gmc sierra 1500
Michael
2/2/2024
flawless
by: Jordan 01/05/2024
2009 Ram 2500
A bit of a learning curve for first time dyi on this type of thing. Key is to make sure you figure out what type of brake light systems you have. There are 2 types and 2 different wiring diagrams. Read directions thoroughly. Works well. 2009 dodge 2500 install
by: Rob 12/13/2022
Works as advertised. Installation takes some time but instructions were very good. No complaints.
Rob
12/14/2023
Still working fine.
by: Terry11/14/2023
Just wanted everyone to know, that after one year of owning and using the Roadmaster towing baseplate, and the wiring harness for my 2022 Ford Maverick, I have accumulated over 10,000 miles of trouble free towing behind my Motorhome. The folks at etrailer did a great job making sure I had the right parts and at a good price. Delivery of the parts was exactly the day it was promised. I highly recommend them when need these kind of parts. I really appreciated the great and friendly service!! Safe travels
by: Christina 05/22/2024
Easy to install with great instructions provided.
by: Jaime04/17/2024
The best customer service. The really know all about rv accessories
by: Skid Lid01/24/2024
Project went as expected. I did purchase additional split loom from Harbor Freight to protect the wires from the front to the rear of my truck. It easily ran inside the frame rails!
25
1284
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Where To Mount the Flat-Tow Electrical Connector on a 2019 GMC Sierra 1500The best place to mount the electrical connector is directly to the front bumper fascia, below the chrome moulding. I have attached a few photos of this for you as well on the Roadmaster Crossbar-Style Base Plate Kit part # RM-523198-4 but it shouldn't really matter which kit you have. If you don't already have a flat-tow wiring harness for your vehicle then I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 because it will then allow you to incorporate...
view full answer...
- Recommended Components To Flat Tow 2019 Jeep Cherokee Trailhawk W/ 2019 Forest River ForesterI would be happy to go over everything you need to flat tow your 2019 Jeep Cherokee Trailhawk with your 2019 Forest River Forester. Unfortunately the Blue Ox Base Plate Kit # BX1143 you mentioned is not compatible with your Blue Ox Alexxa Tow Bar BX7435 due to it requiring base plates with a different bracket spacing, so you will need a new tow bar as there is not a base plate kit available that will work with your tow bar.. I still recommend going with the # BX1143 but instead recommend...
view full answer... - Items and Accessories for Flat Towing 2019 Ford FiestaYes we have base plates that will work with your current Blue Ox tow bar, I suggest the Blue Ox Base Plate Kit with Removable Arms, # BX2650, this is a Confirmed to fit for your 2019 Ford Fiesta. If you do not already have a set of safety cables with your current tow bar, I suggest the Blue Ox 7' Safety Cables, # BX88196. We have several wiring solutions available, but the most popular and easiest to use once installed is the Roadmaster # RM-15267and you will need the battery quick disconnect,...
view full answer...
- Is the Mopar Flat Tow Performance Kit Needed for a 2019 Jeep CherokeeAccording to my research, the Mopar Flat Tow Performance Kit 68321424AB is no longer needed on a 2019 Jeep Cherokee as it was for previous model years because revisions have been made to the power steering system to aid stability. That said, only the models with Active Drive II Transfer Case can be flat-towed which I believe is only available on the Trailhawk. I have attached some parts you will need to flat-tow below if you are interested. Roadmaster Nighthawk All Terrain Tow Bar part...
view full answer... - Correct Blue Ox Base Plates for 2019 Jeep Cherokee Trailhawk With Steel Bumper and Tow HooksThanks for being a regular customer and I have confirmed with Blue Ox that the correct base plate kit for your 2019 Jeep Cherokee Trailhawk with a steel bumper and tow hooks is the Blue Ox Base Plate Kit # BX1143. The reason you are seeing a different part number on the Blue Ox site is because the # BX1143 actually replaced the BX1140 for the 2019 Jeep Cherokee Trailhawk with a steel bumper and tow hooks; it was simply a part number change (for reasons that go beyond my pay grade). Since...
view full answer... - Wiring a 2016 MKX with a Roadmaster Diode Kit With Umbilical CordThe diodes in the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit, # RM-15267, will not interfere with the light diagnostic system in your 2016 Lincoln MKX. The diodes actually protect the system from electical feedback and the damage the extra wiring could cause to your vehicle's electical components if they were not installed. If you are using the Blue Ox Patriot Portable Braking System, # BLU37TR, then you just need to plug it into 12V outlet and run the breakaway wire into...
view full answer... - Which Roadmaster Flat Towing Wiring Kit Recommended for 2016 Ram 1500 with LED TaillightsYou are correct the Roadmaster # RM-155 cannot be used with the 2016 Ram 1500 models that have LED taillights. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there...
view full answer... - Is RM-032 Base Plate to Blue Ox Tow Bar Adapter Compatible With Roadmaster EZ Base PlatesThe Roadmaster base plate to Blue Ox tow bar adapter, part # RM-032 is compatible with all Roadmaster base plates EXCEPT for the MX, MS or EX5 series. Since the Roadmaster # RM-52289-4 you're inquiring about is an EZ series, the # RM-032 adapter will work great for you. In addition to the base plate, adapter and tow bar you'll also need safety cables, a taillight wiring harness, a supplemental braking system and possibly a high/low adapter if the installed base plate has a height difference...
view full answer... - Parts Needed to Flat Tow 2011 Ford Edge with Roadmaster Blackhawk Tow BarThe Roadmaster Blackhawk Tow Bar part # RM-422 can definitely be used to flat tow your 2011 Ford Edge. The correct base plate you'll need is the # 4408-1 if you do not have adaptive cruise control or part # 524426-1 for if you do have adaptive cruise control. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice...
view full answer... - Parts Needed to Flat Tow 2012 Chevy ColoradoThe Chevy Colorado must have a Neutral and a Four-Wheel Drive Low setting to be able to be flat towed; please review your vehicle specific owner's manual for this information. - Base Plate, Roadmaster Crossbar-Style Base Plate Kit, # 3122-1 - Tow Bar, Roadmaster Falcon All Terrain, Non-Binding Tow Bar, # RM-522 - Safety Cables, RoadMaster 68" Single Hook, Coiled Safety Cables, # RM-643 - Tow Bar Wiring, Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit, # RM-15267 - Supplemental...
view full answer... - Comparing Demco Tabless and etrailer Invisible Base Plates for a 2018 Jeep Grand CherokeeThere are no differences between the Demco Tabless Base Plate Kit part # DM9519291 and etrailer Invisible Base Plate Kit part # e98950, this is just who we use for our braded base plates. I recommend whichever is more cost effective at the time. They are both directly compatible with most Blue Ox, etrailer, Demco, and Curt tow bars. In order to complete your setup you'll still need a few other items which I have attached for you below. Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring...
view full answer... - Parts Needed to Flat Tow 2017 Ford ExplorerIt sounds like you are asking about the parts needed in order to flat tow your 2017 Ford Explorer, and I can let you know everything required in order to do that. If you are referring to any type of procedure you will need to check you owner's manual, and you can often find this under a section called "Recreational Towing." As for the parts, here is what is needed for you to flat tow your 2017 Ford Explorer: - Base Plate Kit: Demco Tabless Base Plate Kit # DM9519329 - Tow Bar: Demco Commander...
view full answer... - Parts Needed to Flat Tow a 2018 Jeep Grand CherokeeThe Sterling, part # RM-576, is a good tow bar so you definitely want to keep it. There aren't any Roadmaster base plate kits that fit the 2018 Jeep Grand Cherokee at this time so I recommend using the Blue Ox kit, part # BX1128, with the adapers # BX88151. The base plates are virtually hidden with the arms taken off. Take a look at the picture I attached. The Sterling originally included wiring to connect the motorhome to the Jeep as well as a 6-way connector to install on the front...
view full answer...
- Recommended Base Plates for 2013 Jeep Wrangler Unlimited JKU with AEV BumperThe Roadmaster Stowmaster Tow Bar # RM-501 is not compatible with any of the Blue Ox or Demco baseplates. That tow bar is only compatible with the Roadmaster EZ, EZ2, EZ4 and XL baseplates. Because your 2013 Jeep JKU has the American Expedition Vehicles Bumper, the only fit is the Blue Ox # BX1133. This will mean changing to the Blue Ox Acclaim Tow Bar - A-Frame - Car Mount - 5,000 lbs # BX4330 for the similar design or upgrading to a receiver mounted tow bar like the Blue Ox Alpha #...
view full answer... - Recommended Wiring to Flat Tow A 2005 Jeep Liberty And Still Have 4-Way Trailer WiringSince you want to flat tow your 2005 Jeep Liberty and you want to be able to tow with it, I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This will allow you to have a connection on the front of your Jeep for a motorhome wiring connection and will allow you to use diodes to protect and use your factory wiring. This wiring kit allows you to add a 4-way flat to the rear of the vehicle for towing your boat, using the Hopkins Plug-In Simple Vehicle Wiring...
view full answer... - Parts Recommendation for Flat Towing 2023 Ford BroncoThe Blue Ox base plate kits and tow bars I think are the easiest to use and are very well made so that would be the route I would recommend for your 2023 Ford Bronco with the Ford modular bumper. So the correct base plate fit would be the part # BLU23XR. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the Blue Ox Avail # BX7420 which comes...
view full answer... - Parts Needed to Flat Tow a 2005 Volkswagen New Beetle ConvertibleYes we do have a base plate kit for your 2005 Volkswagen New Beetle. For that you would want the part # BX3815 which is a confirmed fit. For a tow bar you would want the # BX7380 which is the most popular option because of how well it works and it comes with safety cables. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies...
view full answer... - Parts Needed to Flat Tow a 1999 Jeep WranglerThe Blue Ox Alpha Tow Bar # BX7380 would work to flat tow your 1999 Jeep Wrangler. You will need several other items to complete your towing setup though. The first thing you will need is a base plate kit. If you have a double tube bumper you would want the part # BX1120, if you have a U-channel bumper you would want part # BX1118. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight...
view full answer... - Roadmaster Base Plate Kit Recommendation to Fit 2007 Jeep Wrangler with Standard BumperI have a Roadmaster base plate kit that will fit your 2007 Jeep Wrangler with a standard bumper, but the part you mentioned is not it. Instead you would need the part # 1429-1 which is confirmed as a fit for your vehicle. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design...
view full answer... - Parts Needed to Flat Tow a 1993 Honda Accord SedanTo flat tow your 1993 Honda Accord Sedan you will need to start with a base plate kit like the part # 1526-1 that has been confirmed as a fit for your vehicle and comes with removable arms so that when you aren't flat towing your vehicle you wouldn't have two arms hanging of the front of the vehicle. In addition to the base plates, you will also need a compatible tow bar (not included with the base plates), safety cables, lighting, and supplemental braking to flat tow your vehicle. The...
view full answer... - Confirmed Parts Needed to Flat Tow 2020 Jeep Wrangler Unlimited With Motorhome With Air BrakesI'd be happy to help you confirm the parts you need to flat tow your 2020 Jeep Wrangler Unlimited with the factory plastic bumper behind your Jayco Seneca with air brakes. - Base Plate Kit: etrailer Invisible Base Plate Kit # e98948 - Tow Bar: etrailer XHD Non-Binding Tow Bar # e94ZR - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 - Supplemental Braking System: Demco SBS Air Force One Supplemental Braking System for Motorhomes with Air Brakes # SM99243 So...
view full answer... - Will SMI Stay-IN-Play DUO Drain Battery on 2006 Jeep Liberty While Flat TowingSince the SMI Stay-IN-Play DUO Supplemental Braking System # SM99251 uses power from your 2006 Jeep Liberty's battery to engage the compressor, it is possible that the Stay-IN-Play could potentially drain the vehicle's battery over the course of a number of hours. We have not heard reports from our customers on this, but it is a possibility. I was not able to find any known issues of the Liberty's battery being drained while in tow mode in the vehicle's owner's manual. One thing that...
view full answer... - Recommended Flat Towing Parts for a 2021 Jeep Wrangler Unlimited To flat tow your 2021 Jeep Sahara Unlimited Altitude behind your 2023 Coachmen Encore 325SS class a RV you will need the following parts: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-521453-5 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267. This diode kit allows you to use your Jeep's tail lights and wiring system while...
view full answer... - Complete Flat Towing Setup For a 2023 Ford Bronco The Blue Ox Patriot Radio Frequency, Portable Braking System # BLU37TR will work great with your 2023 Ford Bronco. This braking system will work with/without models that have the signature LED taillights and with this being a portable system means it can be transported to a different vehicle down the line if need be. Also, I'm going to assume that you have everything else needed to flat tow considering you're only asking about a braking system, however in case you don't have everything...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Michael H
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Amber S
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Schuyler H
Video by:
Ethan H
Video by:
Rick G
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video Edited:
John S
Written by:
Rachael H
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Matthew E
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dale
4/17/2024
System has worked great on several trips in the last year. Including a 5,407 mile trip out west.