Parts Needed to Flat Tow a 1999 Jeep Wrangler

Question:

Hi, i just purchased a 1999 pace arrow rv, and wish to tow my 99 jeep wrangler behind me. Plan to do about 10,000 miles in next 6 months. What tow package do you suggest? Inclusive of everything I will need

asked by: Robert D

Expert Reply:

The Blue Ox Alpha Tow Bar # BX7380 would work to flat tow your 1999 Jeep Wrangler. You will need several other items to complete your towing setup though. The first thing you will need is a base plate kit. If you have a double tube bumper you would want the part # BX1120, if you have a U-channel bumper you would want part # BX1118.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.