To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
CURT towed-vehicle RV harnesses are the ideal solution to connecting your vehicle's electrical system to your RV while dinghy towing.
Each RV harness is made for vehicle-specific application, using OEM-compatible plugs to "T" into the vehicle's wiring without any need for cutting or splicing.
Simply plug the provided 4-way flat connector from the front of the vehicle into the RV's 4-way flat socket. Uses the vehicle's existing tail lights, turn signals and brake lights, eliminating the need to purchase additional lighting. The vehicle's lights operate in conjunction with your RV's lights functioning just like a standard trailer in tow.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (29 Customer Reviews)
This is the simplest solution I found for wiring my 2015 Fiat 500 Pop for towing. I like the simplicity of just plugging the harness between the vehicle wiring and tail light fixture without having to cut or splice any wires.
Minus one star because the wiring extension to the front of the car came up short by about at least a foot from the front center where my plug attaches to my base plate. Not a huge problem for me because I am wiring a 6 pin socket that attaches directly to my Blue Ox base plate. I just used the wire included to connect my RV to the Fiat to make up the difference and connect to my 6 pin socket.
There were good suggestions in the instructions regarding routing the wiring from the back to the front. However, I couldn’t get the fish tape over the wheel wells or under the splash guard. I ended up jacking up each wheel (driver side rear and then front) then removing the tire the wheel well lining. You have to remove a half dozen fasteners on each wheel well liner and wrestle a bit to get the liners out, but it made routing the wiring over the wheel wells easier for me. I also removed three screws (Philips) under the edge of the drivers side splash guard to loosen the edge of guard which made it simple to run the wire extension between the guard and the frame at that location.
We purchased our road master towing equipment from etrailer, and then added a this wire harness for our towed vehicle. Every time we purchase from them, they exceed our expectations and ship quickly, and provide excellent videos on their products and installation process. They have now earned the place of being my go to, for all things towing and motor home. Keep up the excellent work team etrailer!
Purchased this tow light harness kit specifically for our 2013 Fiat 500 Pop that will be flat-towed behind our RV. The kit arrived just several days after being ordered and contained all the parts required for installation. The install was surprisingly simple due to the 'plug n' play' feature! It took a little over an hour, but we chose to route the wires slightly different than what was suggested on the instruction sheet. We are happy with the results. The Fiat's lights now work as intended for towing and can easily be removed in the future, if necessary.
Nice service
George
2/19/2023
Works well
All and all the harness is very good, it took about three hours to install. Everything plugged together fine, the only
draw back was the wire lead for the car tail lights could have been a couple inches longer. Going to tow car behind a motorhome and the extra lights will help other people see it.
We only installed a portion of the kit, since the wiring was already in place from the front of the vehicle to the rear. Everything worked perfectly. The instructions were easy to follow. I would not hesistate to purchase his product again.
Well constructed base plate. I called Blueox with a question and received great service. So glad that I chose etrailer and BlueOx!
McKenzie was extremely helpful with advise on all my needs for flat towing Fiat 500. I will keep her as my goto person at etrailer.
Has worked perfectly. Only reason for four stars is that it was difficult to install. But once it’s done it’s been fine.
Steven J.
2/10/2021
Still working great. Have had zero problems.
The installation went well. The 4flat wire needs to be about a foot longer
The cord to the front of the vehicle could be about a foot longer other than that I am very pleased with the package.
Good construction of product. Install made easy by good instructions. Happy with the purchase.
Plug and play is wonderful. Easy to run wire up to the front.
Have had no problems at all! It was fairly easy to install and we had zero issues! Thanks for a quality item!
Excellent as expected
fits perfectly, easy install, works gre at.
Do you have a question about this Tow Bar Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Max L.
9/28/2021
Since installation, the wiring to my Fiat 500 tail lights for towing has worked without a problem. I’m pleased.