Blue Ox Fuse ByPass Switch for Towed Vehicles - 2 ATC/ATO Fuses

Blue Ox Tow Bar Wiring - BX88294

Use this fuse-disconnect system to prep your vehicle to be towed. Simply relocate your car's fuses with this bypass and flip the integrated switch. To drive your car, just flip the switch back on. No need to remove or replace your fuses.

Features:

• Bypasses towed car's fuses so you can tow your vehicle without draining its battery
  • Provides a simple alternative to removing fuses every time you tow
  • Stores fuse so that you won't lose it
• Installs quickly, easily and permanently
  • Remove fuses from car's fuse box and install Fuse ByPass in their place
  • Put fuses into Fuse ByPass fuse holders
  • Mount bypass switch near fuse box
• Maintains functionality of high-amp fuses when switched on
  • Flip switch to "drive" position and drive like normal
• Overrides fuses when switched off
  • Flip switch to "tow" position and you're good to tow
• Made in the USA

Specs:

• Application: ATC/ATO fuses
• 1-Year warranty

Note: Consult vehicle's owner's manual to determine which fuses to pull. Do not install a fuse in the Blue Ox Fuse ByPass that has more than a 20-amp rating.

Some automobiles can only be towed if you get under the hood and pull a fuse. If you don't remove this fuse before towing, there's a good chance that your car's battery will be drained by the time you reach your destination.

With the Blue Ox Fuse ByPass, once the initial installation is complete, you won't have to remove or replace your fuse again. Just pull the fuse indicated in your car's owner's manual and replace it with the bypass. After you install the Fuse ByPass, insert the removed fuse into the holder of the bypass system. With the fuse installed in this manner, it will still be able to function as needed. Mount the included switch near the fuse box and you're set.

Whenever you need to drive your car, just make sure the switch is flipped into the "drive" position. When on, the fuse will be active and your vehicle will function normally. Then, when it comes time to tow, switch the Fuse ByPass to "tow." This will render the fuse inactive so that you can flat tow your car without its battery being drained.

BX88294 Blue Ox Two Circuit ATC ATO Fuse By Pass Switch