Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes - Wireless Monitor - Proportional
Item # DM86VR
Retail:$1,590.00
Our Price: $1,349.00
You Save: $241.00
Confirmed to Fit
2010 Chevrolet Silverado
1500 - with adjustable pedals
1500 - without adjustable pedals
2500 - with adjustable pedals
2500 - without adjustable pedals
3500 - with adjustable pedals
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (592)
- Q & A (0)
- Photos
2010 Chevrolet Silverado - Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes - Wireless Monitor - Proportional
- Proportional System
- Hydraulic Brakes
- Brake Systems
- Fixed System
- Demco
- Power Assist Brake Compatible
Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components stay out of sight. Includes convenient wireless Coachlink.
Features:
- Guarantees smooth, reliable braking
- Reads RV's brake light signal to ensure system only activates when you actually hit the brakes
- Senses the rate of your RV's deceleration and triggers your towed car's brakes to slow down at the same rate
- Lets you adjust braking sensitivity to suit your vehicle and your preference
- Plug-and-play
- System automatically turns on when your towed car is connected to the RV
- Components install permanently and stay tucked out of sight
- Monitors your towed car's braking with the wireless Coachlink
- LEDs lights up and alarm beeps when the brakes are applied
- Transmitter connects to reed switch on brake of towed car to ensure accurate reading
- Avoids damage from over-braking by reactivating car's vacuum-assisted braking
- Includes breakaway system and all necessary components
- Made in the USA
Specs:
- Application: motorhomes with hydraulic brakes
- Compatible with hybrids and other cars with continuous-power-assist brakes
- Operating unit dimensions: 8" long x 5" wide x 2-1/4" tall
- 5-Year warranty
"This is the top system I recommend if you have hydraulic brakes. Quality, reliable, tried-and-true. It just always works."
Do I Need a Braking System for Flat Towing?
A braking system is a must when towing a vehicle behind your motorhome. Without it, the weight of the towed car can create a safety hazard, strain your RV's brakes, and affect the warranty of both your car and motorhome. Most states legally require a supplemental braking system, so if you don't use one and you end up in an accident (which is more likely since your RV takes longer to come to a full stop), your insurance and liability headache just doubled. You also won't have any breakaway system; if there's an accidental disconnect, there's nothing to bring your car to a stop.
Pros of a Permanent System
The Stay-IN-Play Duo is a permanent braking system, which means that it's a one-and-done. Once it's installed, there's no more setup that you have to do. When you plug in the power cord at the front of your vehicle, the system automatically turns on. Flip the on switch for the G-Force controller and just like that, you're ready to flat tow.
While the components are installed permanently in your RV and toad, they remain concealed and inconspicuous. None of them will interfere with normal driving, and most of the time they are invisible. And you don't have to find a place to store them between trips.
How Does the Demco Stay-IN-Play Duo Work?
The Stay-IN-Play Duo is unique in that it uses both an inertia sensor and your motorhome's brake light signal to activate. Having this double-check ensures that the system will only activate when it's truly needed.
First, the Duo monitors your motorhome's brake light signal so that it knows when you're intentionally hitting the brakes. This ensures there's no false braking.
Second, the inertia sensor in the Duo senses the change in momentum of your toad (towed vehicle) as your setup slows down. It precisely measures this change so it can activate your toad's brakes to match the rate of the RV's deceleration; this is what makes it proportional. When you apply the brakes in your motorhome, the braking system will engage the brakes of the toad at the same time with the same amount of force. This keeps the RV and the toad in sync with each other, so whether it's a gradual slow down to a red light or a hard stop in an emergency, the toad and the RV will brake together.
It starts with the G-Force controller. The G-Force controller contains the inertia sensor that senses the change in your RV's momentum. You'll install it in the cab of your toad, underneath the dashboard. This keeps it out of the way but easy to reach so you can flip the toggle and adjust the knob.
Note: The G-Force controller must be pointed in the direction of travel - with the toggle switch facing the driver's seat - for the internal sensor to function properly.
The controller lets you adjust the sensitivity of the inertia sensor to determine how drastic the change in momentum must be for the system to trigger. Set the sensitivity low and the Duo will only engage when you forcibly step on your motorhome's brake pedal. Set it high and a mere tap on the brakes will get a reaction. It's totally up to you how sensitive you want it to be; a heavier vehicle will probably need more sensitivity, while a lighter one doesn't need to brake so hard. The knob on the face of the controller lets you easily program your setting.
When the G-Force controller detects a change in inertia, it checks that there's a brake light signal from the RV to confirm that it is indeed braking. It then sends a signal to the main operating unit to activate; the main unit delivers pressurized air through an air line to the actuating cylinder that attaches to your toad's brake pedal. The cylinder will pull the pedal down, applying your brakes almost instantaneously.
The actuating cylinder attaches permanently to the arm of your toad's brake pedal. Though it is permanent, it should not interfere with your everyday driving. In most vehicles, it is tucked up where you can't even see it.
Vacuum Pressure Creates Smooth Braking
When you're drivng, your vehicle uses vacuum pressure to create the force needed to bring the car to a stop. On most vehicles, this vacuum-assist function does not work when the engine is off. As a result, a lot of supplemental braking systems have to use an excessive amount of pressure while braking the toad.
The Duo, on the other hand, reactivates the vacuum-assist function by tying into your car's vacuum line. Your car will break evenly and naturally as it's being towed, so there's less risk of damage.
Built-In Safety Features
Included in this kit is the wireless Coachlink for safety and peace of mind. This monitor, sitting on the dashboard of the RV, will light up and beep whenever your toad is actively braking. This will give you a simple and convenient way to keep tabs on whether the system is working properly or if something is going wrong.
Most supplemental braking systems have a method of letting you know you when they activate, but not all of them are checking if the toad is actually braking. There could be an error that causes the system to activate without actually applying the toad's brakes. Or your brake pedal might actually be continuously depressed when it shouldn't be. But unless you have a system that's monitoring your vehicle, you won't know it until the damage is already done.
The Duo also comes with a breakaway switch, an absolute must for safe flat towing. If there's ever an emergency situation where your toad becomes detached from the motorhome, the breakaway switch will immediately activate the brakes and bring the vehicle to a stop.
This switch mounts to the front of your toad and wires into the Duo's operating unit. It includes a pin that connects to your RV's hitch receiver with a breakaway cable. If the toad and RV become disconnected, the cable will pull the pin out of the switch and trigger the braking system. A reserve air supply in the operating unit will then apply the brakes in the car.
What You Need to Flat Tow
Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system.
| For the RV | Between the RV and Towed Car | For the Towed Car |
|---|---|---|
| Hitch | Tow bar | Base plate |
| Wiring plug | Safety cables | Braking system |
| Wiring adapter cord | Wiring kit/diodes |
The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar. Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
9599018 Demco SBS - (Formerly SMI) Stay and Play DUO Supplemental Braking System for Motorhomes with Hydraulic Brakes with Wireless Coach Link Braking Monitor - Proportional
Installation Details
Alternate Instructions
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes - Wireless Monitor - Proportional - DM86VR
Average Customer Rating: 4.8 out of 5 stars (592 Customer Reviews)
Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components stay out of sight. Includes convenient wireless Coachlink.by: Jim05/02/2024
2023 Jeep Wrangler
I installed this system in a 2023 2 door Wrangler. I also used an etrailer base plate and etrailer tow bar. I had originally purchased a Demco Delta Force Braking System. However, with the shape of the floor in the Jeep I was unable to use this unit. There are various places to install the stay n play duo in the Wrangler and the etrailer installation videos show this. I elected to install mine under the drivers seat as I wanted to keep it out of the elements. I fabricated a sheet metal bracket to mount it on that allows the rear seat heater duct to function unimpeded.
Once installed the unit is out of sight and very simple to use. Just a flip of the toggle switch and its ready. I only needed to make a few adjustments to have it brake the way jeep the way I wanted. This is also a very simple procedure.
I highly recommend this unit and appreciate all of the information etrailer has on their site to aid in the procurement and installation of their products.
by: Deborah04/20/2023
eTrailer was very helpful in choosing the correct hitch for our rv and car. They also provided a special brake application in the car that makes it super easy for toad braking.
I am 72, and I hook up this toad and pull it with confidence. The instructions to hook up the toad was presented with ease. They knew exactly what they were doing, and we didn't rush through the demonstration. I would recommend eTrailer to anyone.
by: Edward03/13/2024
It took me a couple days to get this installed,I'm not as flexible as I was so that didn't help. However I followed the instruction steps and got it done.Had to adjust the sensitivity a few times until it was the way I wanted.System works good and I get a alarm when brakes are activated. This gives you peace of mind knowing your brakes are not applied when they shouldn't be. Very Happy with it,just have to flip a switch when towing.
by: Tim L.07/24/2023
2023 Chevrolet Equinox
Installed 6/17/23 on a 2023 Equinox LT (AWD). Installation was pretty straight-forward. I mostly followed etrailer's videos. Note that the pneumatic cylinder needs to be mounted fairly high on the brake pedal arm so you have a 'square' profile to clamp onto. This vehicle has an electronic brake booster rather than pneumatic, so follow Demco's instructions regarding this variation. The wireless coachlink works great. I couldn't be happier with this system.
by: 10/13/2023
Very easy install, and the videos on E-trailer helped a bunch! I opted to put the controller and wireless link on the passenger side, because there was more room there, but the controller is still properly orientated. Be sure to leave enough slack in your wiring if you decide to mount the operating unit on the fuse box, so you'll be able to remove the cover later. Happy trails!
by: David 02/21/2024
2019 Ford Fiesta
First I have never installed a braking system before, and I was somewhat unsure if I would be able to complete the install without issues, but this worked exactly as described in the written instructions and provided video's. I took my time to verify each step and that all the electrical connections were solid (very important). Following the instructions and the video made it possible for me to install the system and have it function exactly as described. All you need is some good basic idea of how the system works, how to make electrical connections as well as follow written instructions backed up by video to install this yourself. Of course, having eTrailer there to answer any questions was a major factor for me to purchase this unit from them. If you are thinking about adding a tow vehicle braking system this is the one for you too.
by: Terry 03/15/2024
My E-trailer experience was outstanding! From the great selection guide to the delivery to the installation support. The installation videos were very helpful. I had two installation issues that were answered with a prompt phone call. One call was on a Saturday morning. I highly recommend E-trailer!
by: Lincoln05/04/2021
This is a really nice braking system. It works EXACTLY as described. Engine breaking does not trigger breaking (because it's tied into the break light circuit). And breaking truly is proportional. Light braking and it does not engage activate braking. The remote wireless coach receiver shows you how hard the car is breaking, and IS proportional to the breaking in the Coach. When the car is breaking the wireless receiver shows you, at three levels (the number of lights lit from one light to three) how hard the towed is braking. i HIGHLY recommend the wireless unit for breaking notification.
Instructions were very clear. I studied my 2004 Pontiac Vibe (same as Toyota Matrix), and watched a bunch of online videos on installing this product. This is a particularly good car for a toad, because it is so light. (2700 lbs curb weight -- and it rolls really freely).
Installation was particularly painful under the dash where (as a tall person) I had to contort myself into all kinds of uncomfortable shapes with various padding) to reach up under the dash panel . There is just no easy way I could find to remove the lower dash panel without taking about whole dash board. So just figuring out the cold side of the break switch was very difficult. It was impossible to get a probe on the break light switch plug. I ended up clipping a wire junction connector on to the (green wire coming of the brake switch after unplugging the wire harness) and then probing that after plugging it back in. I guessed right, It's the green wire that is the cold side of the switch. For someone who reads this you don't have to guess. I've done it for you
On this car I was concerned about going through the firewall and puncturing the break booster when mounting the cable terminal for the actuating cylinder. In the end, where I needed to go through the firewall was nowhere near the booster. It also turned out trying to use the self taping screws was just too hard. I wanted to use the reinforcing plate, but ended up loosing it under the carpeting. Finally I decided to just drill a 1/4" hole through the firewall (just northwest of a little dimple in the firewall), and bolt the cable cable terminal to the fire wall with a 1/4x20 combo head machine screw, and a fender washer, lock washer, and nut on the engine side of the firewall. I put silicone on the washers and nut, to prevent corrosion. I had just enough room under the car to get a wrench onto it. It would have been nice to have a car lift in my garage, but I did this work by blocking the car up on jack stands. My son held the bolt on the inside of the car. while I tightened the nut on the engine side of the firewall.
Another problem was: where to mount the operating unit in the engine compartment? I struggled with this until I found an online video of an installation on a Honda, where the tech mounted the operating unit to the engine cover. This worked out well, and made for easy routing of the vacuum lines both to the vacuum line between the engine and the brake booster, and through the firewall grommet to the actuating cylinder.
I mounted the wireless sending unit on the dash at the driver's A pillar, and the control unit on the passenger side, where there was much more room, routing the wires behind the center console over the the drivers side to go through the firewall. Calibration (adjusting the control unit position) worked exactly as describe. I set it and I was done.
In the end, though a painful install process, ESPECIALLY above the foot pedals under the dash, I know I am going to LOVE this system. To setup for towing: just flick the switch on the control unit, and hook up the car. No other special setup is required.
by: Timmy04/11/2024
2023 Jeep Wrangler
I've used this setup for a year towing a 2023 Jeep Wrangler . I 100% recommend it for anyone else. Under normal conditions it is very easy. Under stressful conditions (bad weather, uneven terrain, need to connect/disconnect quickly) it is a life saver.
I am 63 and I can connect/disconnect this in 5 minutes.
by: John03/16/2024
2020 Chevrolet Sonic
I ordered the wrong braking system. They were very helpful with the return and ordering the right braking system. Highly recommend anyone to deal with etrailer
by: Bill C03/28/2024
I received this yesterday and have not yet installed it. The FedEx driver handed it to me as it was raining. The outer cardboard container was slightly damaged as the packaging is compromised my cutouts so the brand and description show. Overall, I am quite pleased with Etrailer. The vehicle fit information and instructional videos are especially helpful.
by: Larry04/04/2024
etrailer is my GO TO place for everything. The people there are fantastic to work with. The go out of their way to assist in anything possible. If you haven't experienced working with etrailer, you are definitely missing out.
by: Jeffrey11/18/2021
These installation photos are for the Demco Duo Play braking system install on a 2018 Ford Fusion Platinum Energy with push button start.
Jeffrey
11/19/2022
I works perfect every trip. I do a hard braking test at the beginning of every trip. The wireless monitor in the motorhome immediately reports the functionality of the braking system. I am very satisfied with this product. I installed everything myself.
by: Bobboots10/21/2023
2017 Mini Cooper
The Duo System took about 8 hours to install on a 2017 mini cooper s 4 door due to tight space everywhere. The etrailer video was very helpful although I atteached to vaccuum line in a much easier location up next to the Vaccuum unit on the firewall. The video also recommended using heat-shrink crimp connectors which are not supplied by Demco. The fuse-holder is also crappy and the 20A fuse has slipped out of the holder with the cover closed, so I ordered a waterproof 20A circuit breaker and tossed the unreliable fuse holder which failed on my first trip. Demco also provides no indicator LED to show that the braking system switch is on and it is powered up and ready to function. This is asafety issue that should be addressed. For the cost of this system, these few simple enhancements would ensure that it works reliably for many years.
by: Michael 09/07/2022
2018 Jeep Wrangler
Works great. It takes some time to install but worth it for the ease of use after. I installed the same system on my 2018 wrangler without the coach link monitor, used it over 4 years and 18,000 miles without a problem. I like the addition of the coach link monitor as the light is right in front of you.
Michael
9/9/2023
1 year with 4,000 miles of use and still working great. No problems.
Mike L.
11/1/2023
@Michael Niice! Glad to hear that!!
by: Ron 10/13/2023
Extremely difficult to install. Installation Instruction need to be interpreted rather than followed.
However, once installed, braking on the toad is amazing. I went from no brakes to this brake system. Significant difference.
by: Victor03/09/2022
2019 Ford F-150
Appears to be working as expected, will be going on our first long trip in April to confirm.
instructions are generic so some judgment calls needed to be made for my 2019 F150 Raptor. I ended up placing the vacuum hose in the booster in the sensor hole, and placing the sensor at the end, rather than splicing into the preformed hose. Not a project to rush thru.
Victor
3/10/2023
Last April 2022 we went on a 2 month 6000 mile journey, pulling steep grades, raging thunderstorms, and some hot and dry days, all without any issues with the braking system. Very satisfied.
by: DIY installation on 2018 Jeep Wrangler JL 4-Dr Unl08/23/2023
2018 Jeep JL Wrangler Unlimited
DIY installation on my 2018 Jeep JL unlimited 4-Dr went perfectly. I watched the video (a 2018 like mine) and followed along as I installed and it turned out just as the video showed. I added marine grade shrink wrap on all of the wire crimps, added the coiled split conduit wherever I could. Trying to Zip tie the wireless transmitter under the dash wasn’t working out for me so I cut two strips of double sided automotive tape and secured it to the metal dash support. Then I installed the towed vehicle wiring kit again following the Jeep JL videos. A lot of crawling around fishing the wiring through the side box railing…but doable. The only tedious part of this installation was finding good spots for mounting the emergency brake plug and the 6-way outlet on my heavy duty aftermarket winch mount bumper. My towed vehicle battery maintainer wiring should arrive shortly to complete my wiring.
Lastly, I ordered adapter 1” D-Ring brackets to fit the Roadmaster Nighthawk tow bar (checked with Cliffs in Scottsdale to inspect my aftermarket bumper first)….fit like a glove and easy to install on the tow bars. Fingers crossed and did the function tests and all worked as designed! I would add photos but the videos look identical to my application.
by: Hans04/13/2022
Jeep
This system is time consuming to install but with the help of the etrailer videos the install went well. I really love the system. I have towed my Jeep with my RV a few times down some really steep grades and the system works awesome. The beauty of the system is when you are done towing, you disconnect the tow bars and safety cables, unplug the breakaway cable and brake/turn signal cable, switch off the control unit and your done! Preparing for the tow is just the reverse. I did consider many other types of systems and models, but I'm really happy with the Demco Stay-in-Play Duo. The Wireless Coachlink monitor is also awesome.`
Hans
4/17/2023
I have used the system several times over the last year and I am very pleased on how great it works. We have really tested the system on some steep grades with no problems.
by: Glampur07/28/2023
What a great auxiliary braking system. I was a little apprehensive about installing this system myself on my 1999 Jeep TJ SE, but I found hte instructions to be well written and once I read through them several times and then took my time to follow them step by step the overall installation was pretty straight forward. I wont lie the installation took about 8hrs for me to complete, with one call to their support line which was excellent by the way!I had a question on the diodes. They answered my question and offered great support. Once installed and calibrated, the braking system worked as expected, actually better than expected. I really like the remote monitor which allows me to see when the brakes are applied on the Jeep from within the cab of my RV. I highly recommend this system....
by: Greg05/31/2024
Easy to use fast and gets the job done, great product
by: Kathleen08/11/2023
Braking system worked great on my Jeep. We towed the vehicle on a 6000 mile journey this year. We were up and more importantly, down the Rocky Mountains and the braking system never failed us. Would definitely recommend.
by: Justin 10/10/2022
Etrailer videos made this a pretty simple install. So far so good.
Justin
10/12/2023
Everything is working how it should be.
Mike L.
11/4/2023
@Justin That's great to hear! We're glad your Demcon # DM86VR braking system is working well for you!
by: 04/08/2021
Works great. Self installed on 2018 Ford F150 without much difficulty. I recommend watching etrailer install video. Mine has wireless duo monitor. Extra care needs to be used when splicing into tiny brake light switch wire. If bad connection is made truck will not shift out of park.
by: Gary06/06/2022
Great braking system. Installation directions were good and clear, but there are a lot of steps. It is easy to adjust properly once installed and has worked flawlessly for 2500 miles towing my 2015 Subaru Forester.
25
592
Show More Reviews
See what our Experts say about this Demco Tow Bar Braking Systems
- Blue Ox Base Plate Fit for 2018 Nissan FrontierWe do have Blue Ox base plates that fit your 2018 Nissan Frontier, but not confirmed to fit means the base plates you referenced will not physically fit on the frame of your Frontier, the model number you referenced, for example, is a fit for a 2010 - 2012 Ford Fusion. So for base plates, a tow bar and the rest of the parts needed to flat tow your 2018 Nissan Frontier, here is exactly what you will need that will fit your truck. - Base Plate Kit: Blue Ox Base Plate Kit # BX1843 - Tow...
view full answer... - 2021 Jeep Grand Cherokee Demco Base Plate KitI have a solution for you, but no the etrailer Invisible Base Plate Kit item # e98950 is not confirmed to fit your 2021 Jeep Grand Cherokee. However, the Demco Tabless Base Plate Kit item # DM9519291 is confirmed to fit your vehicle. This is a comparable base plate kit with identical dimensions and capacity. I have linked an installation video. If you don't have the rest of the components to flat tow your vehicle, this is what you will need: Tow Bar Demco Excali-Bar III Non-Binding Tow...
view full answer... - Demco Stay-IN-Play DUO Supplemental Braking System Versus Brake Buddy Select 3 Portable Brake SystemWhile systems like the Brake Buddy Select 3 Portable Supplemental Braking System # HM39524 are much easier to install I still prefer the Demco Stay-IN-Play DUO Supplemental Braking System # DM86VR with the Charge Line # RM-156-25. The Demco does not require carrying the additional box around and having to install and remove the box whenever you connect for towing. Instead you can simply flip a switch to activate the Demco system. The Demco also ties into the vacuum boost system so you get...
view full answer... - Base Plate Kit for 2021 Ford Ranger 4x4 with Least ModificationsThe Demco Tabless Base Plate Kit # DM9519343 will require you to use a grinder for installation on your 2021 Ford Ranger. Sometimes this can vary from vehicle to vehicle but if it's in the instructions I'd say there is a safe bet that it's a step you'll have to take. For a base plate kit that requires the least amount of modification you'll want to go with the Blue Ox # BLU77XR as the instructions call for minor modification to the front shroud as needed. Once you have the Blue Ox kit...
view full answer...
- Best Tow Bar For Blue Ox Base Plates on 2021 Ford Escape HybridThe best option for a tow bar that is compatible with the Blue Ox Base Plates # BO24FR that fit your 2021 Ford Escape hybrid is the etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR. There are a number of reasons why I highly recommend the # e47ZR tow bar, starting with its long arms, which extend nearly 52 inches from the hitch when connected to your base plates. What this does is allow your Escape to track and maneuver better than shorter tow bars, particularly when turning....
view full answer... - Parts Needed For Flat Towing A 2012 Chevy Equinox LT FWDThat is definitely something we can help with. I will start by saying that for most flat tow installs that we do here, install takes 3 days (8 hour days) at a rate of $150 per hour. Certain parts may qualify for free install. Labor pricing is current as of November 2023. Next I will provide a list of recommended parts so you can see pricing, followed by some important footnotes for the 2012 Chevy Equinox. Roadmaster Direct-Connect Base Plate Kit # RM-523160-5 etrailer SD Non-Binding Tow...
view full answer... - Best Parts for Flat Towing a 2023 Cadillac EscaladeThe Blue Ox Base Plate Kit # BLU34GR is a great option for your 2023 Cadillac Escalade! Here are the other parts I recommend using to flat tow your vehicle: - Blue Ox Base Plate Kit # BLU34GR - Roadmaster Nighthawk All Terrain # RM-677 - Roadmaster Accessory Kit # RM-9284-2 - Battery Disconnect with Switch # RM-766 - Brake System # DM26VR for motorhome air brakes, or part # DM86VR for motorhome hydraulic brakes - High-Low Adapter (see attached article - Blue Ox bracket height is...
view full answer... - Best Tow Bar For Roadmaster Direct-Connect Base Plates on 2023 Jeep WranglerReally nice choice going with the Roadmaster # RM-521453-5 direct-connect base plates for your 2023 Jeep Wrangler; the best tow bar that will work with these base plates is called the Nighthawk, and is the following part number: - Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights # RM-676 The Roadmaster Nighthawk # RM-676 is the cream of the crop when it comes to tow bars. It has LED lights which make it simple to use even after the sun goes down (or before it comes...
view full answer... - Base Plates & Flat Tow Parts For 2015 Toyota Tacoma TRD With Roadmaster Nighthawk Tow BarWhile there are no base plates for a 2021 Toyota RAV4, there are base plates as well as the rest of the parts for a 2015 Toyota Tacoma TRD. The base plates are from Blue Ox, but they do allow you to use the Nighthawk tow bar, as there is a version of this made specifically for Blue Ox base plates. I'll go ahead and list out all the parts you need for your '15 Tacoma: - Base Plate Kit: Blue Ox Base Plate Kit # BX3763 - Tow Bar: Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar for...
view full answer... - Parts Needed to Flat Tow 2024 Jeep Wrangler 4xe Behind 2023 F-350 With Truck Bed CamperFlat towing your 2024 Jeep Wrangler 4xe will require a base plate, tow bar, safety chains, wiring, and supplemental braking system. I recommend the following: -Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 -Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar # RM-422 -RoadMaster 64" Double Hook, Straight Safety Cables # RM-646 -Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 (If your Jeep has the ParkSense Proximity Sensors) -Roadmaster Smart Diode...
view full answer... - Parts Needed For Flat Towing a 2015 Jeep Wrangler JK With Nilight Aftermarket Front BumperI tried reaching out to Nilight to both verify their front bumper for your 2015 Jeep Wrangler JK is both safe for flat towing and the dimensions of the tabs. They could not provide me with either so you will want to first verify if your bumper is safe for flat towing and the dimensions of the mounting tabs. We have the 1" Wide # RM-035-1 and 3/4" Wide # RM-035 adapters which are designed to replace the ends on the Roadmaster tow bars like the Nighthawk # RM-676. Both the adapters above...
view full answer... - Flat Tow Parts Recommendation for a 2017 Jeep Cherokee TrailhawkTo get a full flat tow setup on your 2017 Jeep Cherokee Trailhawk you need a base plate kit, tow bar, safety cables, vehicle tow bar wiring (including a charge line kit), a supplemental braking system, and possibly a high-low adapter. Here are the parts I recommend: - etrailer Invisible Base Plate Kit # e98952 - etrailer SD Non-Binding Tow Bar # e34ZR - Flexo-Coil Wiring Kit # RM-15267 - Charge Line Kit # RM-156-25 - Brake Kit # DM26VR for motorhome air brakes or # DM86VR for motorhome...
view full answer... - Is A Battery Charge Line Kit Needed To Flat Tow A 2021 Ford Ranger Lariat With A Fleetwood BounderTo get the Demco Stay-IN-Play DUO Supplemental Braking System # DM86VR working on your 2021 Ford Ranger, you must have 12 volt power run to the 7 Way on your Fleetwood Bounder. Not all RVs have power run, so you will need to check the 1 o'clock with something like the # PTW2992 circuit tester on your Bounder is started. If you have power, then you are good to go. If you do not have power, then yes, you must use the Roadmaster Battery Charge Line Kit for Motorhomes # RM-156-75. With that...
view full answer... - Recommended Flat Towing Parts for a 2023 Ford Maverick Yes, it is. The etrailer SD Non-Binding Tow Bar item # e74ZR is compatible with the Roadmaster Direct-Connect Base Plate Kit item # RM97RR. This base plate kit is custom fit and will work great with your 2023 Maverick. The best permanently installed braking system and what I highly recommend is the Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor item # DM86VR for hydraulic brakes. If your motorhome has air brakes you will need the Demco Air Force One Supplemental...
view full answer... - Parts Needed to Flat Tow 2020 Jeep Grand Cherokee Laredo & Does Battery Need DisconnectingAfter research and checking with Roadmaster I found that the battery does not need to be disconnected on your 2020 Jeep Grand Cherokee Laredo to flat tow it. You can certainly reach out to Jeep for verification but the latest online version of the manual also does not have this step as a requirement. So that will alleviate any of the issues, and in order to flat tow your '20 Grand Cherokee Laredo you will need the following: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit #...
view full answer... - Does Roadmaster Nighthawk Tow Bar Work With Roadmaster EZ5 Base Plates on 2020 Chevy Silverado 1500The two parts you mentioned are absolutely compatible - the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar with LED Lights # RM-676 will work superbly with the Roadmaster Direct-Connect Base Plate Kit # RM-523199-5 that fits your 2020 Chevy Silverado 1500. The Nighthawk tow bar will attach directly to the arms of the EZ5 base plates on your Silverado 1500 without any type of adapter or other part needed. You have made really good choices for your truck, because the EZ5 base plates...
view full answer... - Do You Have to Cut Front Fascia of 2024 Ford Maverick to Install Demco Base Plates to Flat TowHey Carl, thanks for writing in, and that's a good question. Thankfully, the answer is no, you do not need to cut or trim the fascia/face plate on a 2024 Ford Maverick to install the Demco base plate that fits, which is the following part number: - Demco Tabless Base Plate Kit # DM77YV This base plate was designed for the arms to use the openings already on the front fascia which is why no fascia cutting is required. And that's great because nobody wants to do any extra cutting of their...
view full answer... - Recommended Parts to Flat Tow 2022 Jeep Wrangler UnlimitedWe can definitely get your 2022 Jeep Wrangler Unlimited set up to be flat towed with all the best parts. I'll go ahead and list them out for you below then detail why: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 - Tow Bar: Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 - Wiring Kit - Jeep WITHOUT ParkSense Proximity Sensors: Roadmaster Hy-Power Diode Wiring Kit # RM-154 OR Wiring Kit - Jeep WITH ParkSense Proximity Sensors: Roadmaster Wiring...
view full answer...
- Troubleshooting Stay-IN-Play DUO Brake System Strength on a 2022 Jeep Wrangler 4xeThere are a few things to check with your installation of the Demco Stay-IN-Play DUO Supplemental Braking System # DM86VR on your 2022 Jeep Wrangler 4xe: 1. Try plugging off the vacuum hose with a short hose and plug, which will be more than just turning that check valve around. If the check valve were to leak then the system would be creating too much pressure. 2. When I reached out to my contact at Demco they said the way you described setting up the G-Force controller didn't seem correct...
view full answer... - Recommended Parts to Flat Tow a 2021 Ford RangerTo get your 2021 Ford Ranger setup for flat towing I recommend the following parts: - Blue Ox Base Plate Kit # BLU77XR - Roadmaster Nighthawk All Terrain Tow Bar # RM-677 (with safety cables) - Roadmaster Accessory Kit # RM-9284-2 - Brake Kit # DM26VR (motorhome air brakes) OR # DM86VR (motorhome hydraulic brakes) - High-Low Adapter (see attached helpful article - bracket height is 17" for Blue Ox base plate kit) The Blue Ox base plate kit has removeable tabs for a clean look when...
view full answer... - Parts Needed For Flat Towing a 2017 Jeep Wrangler Unlimited Rubicon Here is the Roadmaster Direct-Connect Base Plate Kit # 1444-3 which Roadmaster said to use for your 2017 Jeep Wrangler Unlimited Rubicon. This comes with the arms for a Roadmaster Tow Bar # RM-676. If you are using a Blue Ox Tow Bar # BX4370 you will need the Adapter Arms # RM62ZR. You will need the Hopkins Custom Tail Light Wiring Kit # HM56200 for your tail lights on your Jeep to operate off your motorhome. This will tie into a 7-Wire to 6-Wire, Coiled Electrical Cord # BX88206 for...
view full answer... - Parts Needed to Flat Tow 2022 Chevy Blazer RSPer the owner's manual I searched for online, a 2022 Chevy Blazer RS can be flat towed. Here are all the parts you will need in order to make that happen: - Base Plate Kit: Blue Ox Base Plate Kit # BX1735 - Tow Bar: etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 - Roadmaster Stop Light Switch Kit # RM-751483 - Roadmaster Automatic Battery Disconnect with Switch # RM-766 - Supplemental Braking...
view full answer... - Braking, Wiring, and Charge Kit for Flat Towing 2013 Ford EdgeThe best permanent install style tow bar braking system is the Demco Stay n Play part # DM86VR so you are definitely on the right track. The Hopkin lighting kit part # HM56001 installs easily as it is custom fit for your 2013 Ford Edge and doesn't require any splicing. The coiled adapter part # HM47075 and the charge kit part # RM-156-25 would be all you'd need in addition as well.
view full answer... - Recommended Complete Flat Towing Setup for a 2021 Chevrolet BlazerFor your 2021 Chevrolet Blazer you're going to need to start with a base plate kit. Since there aren't any Blue Ox base plates I'd recommend going with the Roadmaster Direct-Connect Base Plate Kit # RM-523204-5. These are just as good as Blue Ox bae plates and will work with a wide variety of tow bars like the etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR. These tow bars have a beefy 6,000 lb capacity and will work great with those Roadmaster base plates mentioned above. Next...
view full answer...
Do you have a question about this Tow Bar Braking System?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Andrew K
Video by:
Jonathan Y
Video by:
Thomas T
Video by:
Ethan H
Video by:
Samuel H
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Written by:
Kristina F
Updated by:
Mike S
Updated by:
Noah M
Updated by:
Eric H
Updated by:
Emily H
Updated by:
Amanda K
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Deborah
4/21/2024
The braking system is awesome. Just flip the toggle switch to tow, and back for regular driving. Easy!