To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Electric, retractable tonneau cover with light-duty ladder rack lets you carry your bikes, kayaks, surfboards, and other recreational gear. Durable aluminum cover locks at any point along the rails, and the matte black looks great on your Ford F-150.
Features:
Specs:
The UltraGroove is an electric, retractable tonneau cover with a built-in, light-duty ladder rack. This EL200 elevated rack allows you to transport up to 200 lbs of bikes, kayaks, snowboards, and other gear while freeing up space in your truck bed for more items. The cover's heavy-duty aluminum panels help protect your cargo from theft, and the enhanced weather seals ensure your gear stays clean and dry.
Retractable with Remote
This electric, retractable tonneau cover is powered by a motor that wires directly to your vehicle's battery. The included key fob remote activates the motor and allows you to open or close the cover with the touch of a button. An electro-magnetic brake stops and locks the cover at any point along the rails for customized cargo protection. Press the Open button on the remote to retract the cover into the canister. Simply release the button to trigger the electro-magnetic brake and lock the cover in at the desired position. Press the Closed button to deploy the cover. There is an optional manual switch available (sold separately) that allows you to operate the cover from the cab of your truck or at the tailgate.
A manual release is located on the canister in case of remote control or power failure. Simply pull out the manual release lever, and engage the kickstand behind it. This allows you to deploy and retract the cover by hand until power is restored to your vehicle.
EL200 Elevated Ladder Rack
The light-duty ladder rack lets you carry up to 200 lbs of gear while leaving your truck bed free for more items. 2 Square, steel Thule load bars let you attach canoes, snowboards, bikes, camping gear, and more. The rack may also be used to carry lightweight construction supplies such as plywood or sheets of drywall. The rack easily mounts to T-slots built into the cover side rails.
Side Rails with T-Slots
The T-slots in the rails allow you to position your ladder rack as needed to accommodate different-sized loads without interfering with the operation of the cover. The T-slots also allow you to mount additional accessories such as a roof rack directly to the cover.
These rails have rounded sides and curved endcaps that are sleeker and more streamlined when compared with other slotted tonneau cover side rails.
Angled Canister
The cover retracts into a compact, angled canister located at the front of your truck bed. This canister protects the retracted cover from the elements, and with the cover stored in the canister you'll have unrestricted visibility out of your rear window. The angled design of the canister also allows for maximum useable cargo space in your truck bed.
Enhanced Cargo Protection
The UltraGroove provides more protection from water and debris than many other covers on the market. Its rails feature a water management system that channels excess water into the canister. This prevents water from getting into your bed or freezing in your tonneau cover rails during cold temperatures. Drain tubes attached to the bottom of the canister remove water through the OE drain holes in the floor of your truck bed. Additional drain tubes at the end of the side rails also channel water out through existing drain holes in your truck bed side walls.
The cover side rails have rubber seals on the outside that conform to your truck bed rail caps and keep dirt and water out of your bed. The rails have seals on the inside to create another barrier that protects your cargo from water and dust. There are also endcaps that seal over the top edge of your tailgate to prevent leaking at the corners. Lastly, a large seal at the rear of the bed closes the gap between the cover and your tailgate to shield your cargo from runoff water.
Low-Profile Design
The curved side rails and endcaps sit approximately 1" above the truck bed rails for a low-profile look. This sleek design is aerodynamic to reduce wind drag, and it helps to improve gas mileage when cover is closed.
Heavy-Duty Construction
The cover is constructed of interlocking aluminum panels with a black powder coat finish. A silicon weather hinge creates a tight seal between each panel to prevent water and dirt from entering the truck bed. The cover side rails are also constructed of extruded aluminum with a black powder coat finish.
Security
The UltraGroove provides excellent protection for your cargo when used in conjunction with a closed and locked tailgate. The durable aluminum panels are better at preventing theft when compared with soft covers that can be cut or punctured with a knife. The panels are also more effective at preventing theft than a tri-fold hard tonneau cover because the panels cannot be pried open at any point along the rails.
No-Drill Installation
To install the cover, place the canister on a support at the bulkhead of the truck. Run the wiring harness from the canister to your vehicle's battery. Do not connect the harness to your battery until the rest of the installation is complete.
Attach the rails to the canister, then secure the rails to your truck's bed rails using 2 clamps per side. Slide the clamp onto the rail, flip the pivot arm up so it is under the bed rail lip, and tighten the clamp in place. Shims are included for trucks with tapered beds.
Each clamp at the tailgate end of the rails has a supplemental kickstand to help level the rails and prevent overtightening during installation. To install the kickstand, simply slide it into the grip handle at the bottom of the clamp. Rotate the kickstand so the foot rests squarely against the side wall of the truck bed, and tighten in place.
Mount the top cover plate to the canister with the included hardware. Install 2 drain tubes to the rear of the rails and 2 drain tubes to the canister. Route each tube out of the OEM drain holes in your truck bed. Complete the installation by connecting the wiring harness to the battery.
To install the EL200 elevated ladder rack on the cover, secure the Thule square load bars to the uprights. Once assembled, bolt the uprights to the T-slots in the cover side rails.
California residents: click here
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.