Replacement Snow Deflector for Snow Plow - Belted Rubber - 8-1/2' Long x 9" Tall

Video Transcript for Review of SAM Snow Plow Parts - Replacement Snow Deflector For Snow Plow - 3371309102

Hi, everybody, Andy here with etrailer.com, and today we're gonna take a brief look at this replacement snow deflector for snow plows. Now, I don't have this open up all the way, so it'll fit on my table and fit into frame, but I just kinda wanted to give you an idea of what this looks like. So this is going to replace the snow deflector on the blade of your snow plow, and this strip mounts over the top of your blade to direct snow down and away from your windshield. This is made in the USA, and it is constructed of a strong, belted rubber. So it's durable and long lasting. It's 3/8 of an inch thick.

And the overall length of this strip is 102 inches, or 8 1/2 feet long. And it is also nine inches tall. And this is going to install easily thanks to 10 pre-drilled mounting holes. So even though you can't see all 10, this does indeed have 10 pre-drilled mounting holes. And the distance between each of these mounting holes is 10 3/4 inches center to center.

And then the distance between the side edge and the first mounting hole that we have here on the bottom is gonna be 2 5/8 inches, again, from the side edge to the first mounting hole. Now, the mounting hole diameter is half an inch. Fasteners are not included with this. So you will just need to use the existing bolts on your plow. And this weighs about 15 pounds.

Well, that's gonna do it for our look today. I hope it was helpful for you. Again, my name is Andy. Thank you for joining me..