Yakima Roof Rack for Rain Gutters - RoundBar Crossbars - Steel - Black - Qty 2
(103 reviews)
Price: $413.85
In Stock
Yakima Roof Rack for Rain Gutters - RoundBar Crossbars - Steel - Black - Qty 2
Item # Y77VB
Our Price: $413.85
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (103)
- Q & A (0)
- Videos (64)
- Photos
Yakima Roof Rack - Y77VB
- Round Bars
- Crossbars
- 58 Inch Bar Space
- Yakima
- Black
- Overhang
- 2 Bars
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.
Features:
Yakima RoundBars - 58" Long - Black - Qty 2:- Sturdy, round crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack
- Accommodate accessories that clamp around the bars
- Constructed from vinyl-coated, galvanized steel
Yakima 1A Raingutter Towers - Qty 4
- Clamp onto vehicle rain gutters
- Provide base for Yakima roof-rack crossbars
- Adjust to non-parallel rain gutters
- Are lockable with Same Key System (SKS) Cores (sold separately)
- Cores lock crossbars to towers and towers to vehicle roof
- SKS Cores can be changed out to make all your Yakima locks keyed alike
- Constructed from tough Zytel nylon
Yakima 1A HiRise Spacers:
- Convert standard Yakima 1A Raingutter Towers to HiRise Towers
- Add 3-1/2" of clearance over domed roofs or factory roof racks
8000101 Yakima 1A Raingutter Towers (QTY 4)
8000409 Yakima Round Crossbars - Steel - Black - 58" Long - Qty 2
8001101 HiRise Spacers for Yakima 1A Raingutter Towers
Video of Yakima Roof Rack for Rain Gutters - RoundBar Crossbars - Steel - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Roof Rack Installation - 2013 Honda Accord
Speaker 1: Today on our 2013 Honda Accord, we're gonna be test fitting the Yakima RoundBar roof rack system, consisting of part numbers Y00409. These are the round 50-inch crossbars for the Yakima roof rack systems. Part number Y00146, theses are the baseline towers for the Yakima crossbars. Part number Y03536, this is the RoundBar SL adapter for the Yakima baseline, Skyline, Timberline and Ridgeline towers. Part number Y06148 and Y006150, and these are the base clip fit kits that you're gonna need for your vehicle.The Yakima RoundBar roof rack system is great for carrying a wide variety of accessories on your rook or freeing up space inside your vehicle. These bars are tough and durable, and together have a combined carrying capacity of 220 pounds, but you always wanna check with your vehicle's manual to make sure you roof can withstand those weights.They're very easy to install.
They simple clamp around your vehicles doorframe. They come with these end caps here that just snap into place and also have a knock out for Yakima same-key lock system, which when installed, can secure not only your roof rack to your vehicle, but you can also make it key to like with whatever accessories you're installing on top of it.Now that we've gone over some of the features of the roof rack system, let's go ahead and show you how it installs. We already have our rear bar partially assembled on our table and we'll go through the rest of the steps. We'll start by installing our RoundBar adapter, starting with this plastic piece here that fits to the top portion of our tower. Just snaps into place.
We'll take our round bar adapter, which has this screw end on the bottom of it, line it up with that portion there, and we'll come to the end of this, pulling out this gray tab, flipping it upside down, going to the screw, which by loosening up that gray tab we can see now. Let's loosely install it at the moment. Then, we'll slide it on to the other end of our bar.We'll also install the pad portion of our fit kit. It just pushes in at the bottom of our tower until you hear a little bit of a click. Also, you wanna check your fit guide to make sure that this is in the proper notch.
If not, you loosen up the screw there and push it into its proper place. You can see that it moves our pad here. Once it's in its proper place, turn it to the side like that.Now, we're gonna measure it from tower to tower on the inside. Again, this measurement's gonna be in your instructions. Once you got that measurement down, we'll come back to that screw in the bottom here with our adapter piece and tighten it down the rest of the way.
You're gonna hear audible clicks once it's tightened down from our tool here. Like that. There you know it's tightened down enough and you're not gonna over-tighten it.Next, we'll put on our end caps here to hold everything in place. Do this on both sides.Now, we're ready to install it on the rear portion of our vehicle. We'll open up both doors to get ready to receive the rear cross bar. Set the bar in place. I want you to notice that I haven't put the clips in yet. I'm gonna do that in a second. I kind of saved that for the last thing that I do because I don't want the clips to possibly make contact with the roof of the vehicle and possibly scratch it. Make sure they're set evenly on both sides. Next, I'm gonna get the crossbar spread measurement. That's gonna be from center of the bar to center of the front bar. You'll find this measurement in your instructions as well.Next, I'll open up the little door here and our plate will slide to the inside like so. Then, we'll turn this screw. That's gonna lower our clamp onto our vehicle, as you can see there. We'll repeat this for the other side. Next, we'll tighten it down with the center screw here. Again, until you hear those two or three audible clicks. There we go. Then we can close that up. Then we'll put our end caps on. These two portions here fit into these hook portions there. Then they just snap into place. Now, we're ready to load up our gear and hit the road.There you have it for the Yakima RoundBar roof rack system on our 2013 Honda Accord.
Customer Reviews
Yakima Roof Rack for Rain Gutters - RoundBar Crossbars - Steel - Black - Qty 2 - Y77VB
Average Customer Rating: 4.7 out of 5 stars (103 Customer Reviews)
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.by: John K08/17/2012
Free delivery that showed up in 3 days!!! Can't beat it. The crossbars with the Control Towers and LandingPad 9 fit perfectly on my Honda Element. Had them installed in about 30 mins. Don't have my cargo box yet and wanted to test strength, so I had my 110lb wife standing on them with no issues (yes, the car was parked). Plan to take a long camping trip next week with a cargo box on top...wife will be in the vehicle:-)
by: steve Z06/16/2012
roof racks showed up in great condition, and showed up as one package.... I should have ordered the J racks from here but I found them cheaper locally so Thule J racks compliment the whole setup and i am just about ready to hit the water :)
by: Paul D.08/19/2012
A great company to do business with, and lots of merchandise in stock. I orderd a roof rack for my truck on Tuesday morning and it was on the porch when I returned from work on Thursday. I will deffinitely order more from etrailer.com
by: Barry 02/20/2024
Dodge
Fit the 79 Dodge van perfectly
by: Pat G08/29/2013
Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash.
Will definitely be doing business with you all again.
by: Wayne 12/07/2023
As always E trailer handled my order extremely well. Kept me updated on shipping also. Very professional!
by: Tom03/19/2023
These Yakima towers just work. They go on easily and stay tight. No issues whatsoever. They are a little pricey, but it's nice to have something that just works well without any drama.
by: Stephen F.07/23/2019
Yakima Crossbars were as you would expect - steel bars coated in a soft black coating (be mindful when you are utilizing these with the top mounts as the clamp will eat through the soft coating when you tighten them down). I had issues with my yakima round bar setup as the brackets and tower system were allowing water to leak in. This is in no way reflective of what youll experience but Yakima has superb support. I spoke with them twice on my issue and out of their kindness they shipped me an entire setup to replace my existing one for free.
by: Lawrence B08/17/2017
Toyota Prius
I ordered a Yakima Roof Rack for my Toyota Prius from eTrailer.com. Part of the reason for purchasing from eTrailer.com was the promise that the racks were made specifically for the car and would not dent the roof.
I received the rack on July 31, and installed the racks on my Prius according to instructions included with the racks. Our tandem kayak is 65 lbs . The towers were placed on the outer most part of the roof as indicated by the instructions. Yakima saddles were attached to the crossbars to hold the kayak. Nothing was close or touching the top of the roof. We transported the kayak to a nearby lake, 6 miles, and back. The next day we removed the racks from the roof and noticed 4 dents on the top of the roof. It was obvious that transporting the kayak on the rack caused the dents.
We had to pay $100 to have the dents removed from the Prius roof.
I cannot continue to use this rack that puts dents in the car's roof. I was extremely disappointed in the racks. In reading the Toyota manual and contacting them by phone, there is no mention of using or not using roof racks.
I was shocked to learn from Rachel at eTrailer.com that your company takes absolutely no responsibility for this Yakima product they sell. The best they can do is to pass the buck and refer us to Yakima.
Very disappointed, and out a lot of money for a product that damages your car. Will not recommend or buy here again. eTrailer.com does not even deserve one star in this review.
by: Deborah07/27/2023
Great service - great price
by: John04/13/2019
Typical Yakima cross bars. Coating is a little too easy to cut or gouge, but probably needs to be that way to get the grip it provides. Good enough solution for me, and allows me to continue to use all the attachments I've accumulated over the years that require a round bar
by: Blaine 09/19/2021
GMC Terrain
I chose the Yakima A1 raingutter towers for mounting a 96" Yakima crossbar for my Humvee wildfire rig rooftop gear rack. The towers are sturdy and able to handle the constant jarring expected in wild land fire fighting in rugged terrain.
by: Joe C12/30/2012
The only reason I am not giving it an excellent rating is the considerable wind noise that occurs. While we had our luggage carrier atop our car it seemingly imperceptible, however after driving around for a week while on vacation with simply the bars breaking the wind it was quite loud. With that being said they were a breeze to install, aside from having to use allen tool tighten down the fittings. I later discovered that a wratcheting screwdriver with the correct bit size provided for much faster installation and removal. I would definitely recommend for purchase.
by: David K.07/23/2017
The roof mounts were fairly easy to install with the help of the well written installation instructions. I am looking forward to using my new Yakima roof rack for hauling my ladders or a rooftop clamshell cargo bin that I have.
by: Gerald07/02/2018
Ford F-250 Super Duty
This was my second large order from Etrailer.com and my wife I are VERY pleased! Our first order was a Curt 5th wheel hitch which performed as advertised - so easy to use.
Now we haul our 5th wheel camper and that takes up my entire full sized F250 truck bed which in turn messed up hauling the kayaks back there. I was leaning toward rigging something up on the back of the camper, saw lots of posts on how to many looked very sketchy. Rather than risk dumping our two $$$ fishing kayaks onto the highway.... somewhere..... we bought this GREAT Yakima roof rack system for the TOP of my truck cab. You see, it made me uneasy that I wouldn't be able to keep an eye on our boats if strapped to the back AND we read about many horror stories not limited to the rear bumper falling off from fatigue. Yakima Install; I'm a General Contractor and fancy myself a pretty handy guy so mounting the towers, the rack bars, and all of the accessories onto those took a total three hours. [on-line] videos very useful and follow the easy to read instructions that come with each part and you'll have NO trouble. I have to add, etrailer said it would take one week but I received the complete order within four days. Thank you etrailer for making the ordering through delivery experience so very streamlined!
by: Jay F.12/21/2013
Did an excellent job guys. The Yakima towers arrived on time and in good shape. Mounted right up to the canopy clips, installed the existing bars, kayak racks, and lock cores without any issues. All is ship-shape now. Will definitely come back to you guys again.
Thanks!
by: Carlos M.12/26/2018
2016 Ford F-150
Bought the Yakima 58" round cross bars to use on a Leer Camper shell on my 2016 F150. The bars are a perfect width for my shell and work great with my existing Control towers. Great quality as to be expected with Yakima.
by: Shaun05/16/2020
etrailer never disappoints! Every product I need, I check that etrailer has it before purchasing anywhere else. Thank you for the excellent service, the fast delivery, and the email updates on order status.
by: Mike S.09/03/2016
2009 Nissan Cube
Yakima roof rack on a 2009 Nissan Cube. It was very easy to assemble and install. Although I haven't carried anything on it as of yet I'm pleased with the fit. It makes a little wind noise but not terrible. Can't wait to try it out with my kayak mounted on it.
by: Rick U.07/24/2012
Thank you for the quick shipment of my new Yakima Q tower roof rack for my 2007 F150 King Ranch. Following the simple instructions it went together easily and works and looks great. The follow up after purchase has been great from etrailer and I felt like if there had been a problem they would have been there to help me through it.
Thank you!
by: Joshua06/21/2019
website was extremely user friendly and customer service was even friendlier. Carol went out of her way to help me size my roof rack and make sure the specs were correct before shipping. Shipping was also very timely.
by: Victoria 07/13/2016
These bars made my car look awesome and was really easy to instal
by: Mike01/21/2019
The customer service is exceptional. Nick went above and beyond getting the package out as well as dedicated follow-up. I will be ordering another roof rack for another vehicle. Even the return process was seamless thanks to Shelia. I ordered a tow hitch wiring harness a few months ago and received the same great service. Will continue to do business with etrailer.
by: Kyle Z07/31/2013
I have included a picture of my 2008 Mitsubishi Eclipse, with the Yakima Q
System and Even-Keel Kayak saddles. I also used a stretch Kit, which I
picked up locally due to time constraints.
I'll be sure to keep you guys in mind when I am ready to get additional
parts for the system.
by: Erin S.06/16/2017
I love my new rack system, it looks good, works great and is super solid. Instructions were super easy to read and only took about 30 min to install. Definitely worth the money. Extremely satisfied.
25
380
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Can a Dual Hitch Receiver Be Used to Carry a Bike Rack and a Cargo CarrierDual hitch receivers, like the Roadmaster Dual Hitch Receiver Adapter, # RM-077-2, are designed for flat towing a vehicle behind an RV and having the ability to carry a bike rack or cargo carrier in the top receiver. A cargo carrier and bike rack cannot be used together. For your situation I recommend using a roof mounted bike rack like the Swagman Rooftop Bike Rack, # S64720, which is one of our most popular roof mounted bike racks. If you do not have a roof rack on your 2010 Ford Escape,...
view full answer... - Roof Rack and Board Carrier for 2019 Hyundai TucsonTo carry your boards on the roof of your 2019 Hyundai Tucson the first thing you'd need is a roof rack like the Inno aero bar rack part # INXB130-138, # INXS250, and # INK680 which is a confirmed fit and a higher quality rack at a lower price point. Then for a carrier for the boards the Thule SUP Shuttle part # TH811XT would be a really great option that is easy to use and works well.
view full answer... - Largest Roof Rack Recommendation for a 2016 Subaru OutbackIf you install the Yakima SkyLine Towers, # Y53TR, along with the Round Bar Adapter, # Y03536, and the Landing Pad, # Y00241, then you can install any length of the Yakima round crossbars that you wish. Yakima has a 78 inch crossbars, # Y00411, 66 inch crossbars, # Y00410, 58 inch crossbars, # Y00409, and 48 inch crossbars, # Y00408. It is okay to cut them down to a custom length as well if you feel like one is too long once it is installed. There are a few things to keep in mind. First,...
view full answer... - Will the Thule Force XT L Fit My 2020 BMW X5?Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
view full answer... - Recommended Yakima Roof Rack for 2015 Ram 1500 Quad CabFor a 2015 Ram 1500 Quad Cab pickup with no roof hardware you have several choices in Yakima roof racks. All are shown on the linked page. All use the Yakima Baseline towers (not Q Towers) but you can choose either standard 58-inch round bars or 60-inch elliptical bars which are quieter at highway speeds. For the round bar system order parts # Y00409, # Y28TR, # Y03536 and # Y06135. For the quietest option use the Jetstream crossbar system made of parts # Y00426, # Y00146 and # Y06135....
view full answer... - Determining Weight Capacity of Yakima Round Bars on Tacoma Snugtop Rebel Topper The Yakima 58" Round Bars # Y00409 by themselves have a weight capacity of 165 pounds, but it is important to also verify the weight capacity of the Snugtop Rebel itself. Based on my research this looks to be at least 175 pounds for the Snugtop Rebel Topper but I still recommend verifying this. Since you are always limited by a setup's weakest component you will still need to follow the 165 pound capacity on the Yakima bars even if the topper can support more.
view full answer... - Is the Yakima LockNLoad Platform Compatible with Yakima Round BarsYes. The Yakima Rain Gutter Towers # Y00101 can be used in a complete roof rack system using the Yakima Round Bars # Y00409 to mount the LockNLoad Platform Rack for Crossbars - Aluminum - 55" Long x 49" Wide # Y05044-39. You won't be able to mount the LockNLoad directly to the roof though. It looks like you might have a 2020 Jeep Gladiator, so if you wanted to mount directly to your roof the best solution is the Rhino-Rack Pioneer Platform Rack with Backbone Mounting System - 48" Long...
view full answer... - Recommended Roof Rack For Carrying Bikes On 2006 Honda Civic Si CoupeYou can certainly install a roof rack on your 2006 Honda Civic Si 2 door. I recommend the following parts: -Yakima Round Crossbars - Steel - Black - 58" Long # Y00409 -Support Towers # Y28TR -Adapters # Y03536 -Fit Kits # Y06148 AND # Y06161. If you do not yet have a bike rack then I recommend using two of the Thule ProRide XT Roof Bike Rack # TH598004. This is an easy to use carrier that clamps around the bike frame with the twist of a knob. The knob also locks when used with Thule One-Key...
view full answer...
- Can Thule Roof Rack Install in Yakima Roof Rack TracksThule Roof racks can be installed into Yakima Roof rack tracks like whats on your pop up camper. You'll need the Fit Kit for Thule Podium-Style Roof Rack Feet # THKIT3101, and Rapid Podium Feet for Thule Crossbars # TH460R. The feet are compatible with Thule AeroBlade, WingBar Evo, SquareBar, and ProBar load bars, so if your truck's cross bars are one of those you'll be set.
view full answer... - Flexible Track Rack System for Curved RoofYou will be able to mount the tracks of the Yakima 42" Tracks for Roof Racks # Y01127 on your 1939 Ford Sedan and still be able to move the crossbars around in order to adjust the spacing during crossbar mounting. The tracks are made of a light weight aluminum that can be bent enough to match the contour of your roof. To make a complete roof rack system, you will need two pair of the Landing Pad 1 # Y00221, along with four of the Yakima Control Tower # Y8890027 and 2 round bars like the...
view full answer... - Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima TracksYou need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
view full answer... - What Crossbar System Accommodates a Rooftop Tent on My 2017 Honda Accord? For your 2017 Honda Accord with a bare roof without fixed mounting points, the best option is a system that involves drilling. This is because all of the non-drilling options for your vehicle include door jamb clamps that are not recommended for supporting the extra weight associated with a roof top tent setup. Manufacturers strongly discourage this because door jamb clamps setups can buckle and become detached with the weight. With that being said, I recommend the following track system:...
view full answer... - Widest Crossbar Spread Roof Rack Recommendation for 2013 Honda CRVFor your 2013 Honda CR-V the widest crossbar roof rack we have is going to be the Yakima roof rack part numbers # Y00409, # Y28TR, # Y03536, # Y06148, and # Y06152. The spread for this rack is 32 inches whereas most racks are around 27 inch. I can't recommend you widen the spread any more than that or use a track style rack as that will require permanent modification to the roof of your vehicle.
view full answer... - Adding Yakima Round Bars To 2005 Nissan Xterra Roof RackIt sounds like you are trying to add Yakima round crossbars to the factory roof rack of your 2005 Nissan Xterra. This can be done using Yakima TimberLine Towers # Y33TR and Yakima RoundBar Adapter # Y03536. If you already have Yakima round bars then you are all set. If you don't, then you can add either the Yakima 48" roundbars # Y00408, 58" roundbars # Y00409, or 66" roundbars # Y00410. I attached a demonstration video for you.
view full answer... - Will The iKamper 2.0 Fit Yakima CrossBarsAccording to iKamper's website, their product mounts to most cross bars due to its universal design, however since we do not carry their products I can not confirm this. With that being said, since they say it is universal, you can absolutely use the Flexible Track Rack System # Y01127, with the landing pads # Y00221, and the control towers # Y8890027 to mount the iKamper 2.0 on your 2008 Toyota Tundra. Depending how wide your roof is, you can use the 66" crossbars # Y00410, the 58"...
view full answer... - Yakima Roof Rack and Kayak Carrier Recommendation for a 2015 Jeep Wrangler Unlimited HardtopYes you can. I checked with Yakima and the Yakima Raingutter 1A Towers part # Y00101 are confirmed to fit the factory hardtop of your 2015 Jeep Wrangler Unlimited. The recommended crossbars would be the part # Y00409. Yakima says this rack setup has a weight capacity of 100 lbs. You will need to consult your owners manual to determine what Jeep says is your roof capacity and be sure to go with the lower of the two as the overall capacity. For a carrier that can carry up to 2 kayaks...
view full answer... - Will Yakima Roof Rack With Raingutter Towers Fit 2010 Jeep Wrangler Unlimited With a Hard TopThe Yakima roof rack system that you referenced will fit your 2010 Jeep Wrangler Unlimited with a hardtop by attaching to your drip rails/raingutters. To order a complete system you will need 1 set (qty 2) 58 inch round crossbar # Y00409 and 1 set (qty 4) raingutter towers # Y00101. Please be advised that since drip rails/raingutters are not structural the maximum allowable load is skis or snowboards only. You should install the towers on the rear roof panels only and do not install...
view full answer... - Recommendations on How to Safely Carry 12 Foot Jon Boat on Roof of 2013 Hyundai TucsonA great choice would be a Inno Square bar roof rack, which would be made up of the following parts: 54 inch square profile crossbars part # INB137 Inno Feet for Crossbars, part # INSUT Vehicle specific clamp kit, part # INK605 To secure the boat to the roof, using ratchet straps like # IMF14256 hooked over the crossbars would provide a secure hold for the boat. Using foam blocks like # MPG152 would protect the roof rack from the boat and vice versa, as well as adding some friction to...
view full answer... - Roof Rack for 2021 Jeep Wrangler Unlimited With Sky One-Touch TopI checked with our roof rack manufacturers, and there is one option for a roof rack that fits your 2021 Jeep Wrangler Unlimited with the Skye One-Touch retractable roof. This rack will work and still allow you to open the top so long as you use the recommended spacers. The entire rack for that will work is the following: - Round CrossBars for Yakima Roof Rack - 58" # Y00409 or 66" # Y00410 - Yakima 1A Raingutter Towers # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 You...
view full answer... - Parts Needed for Yakima 58 Inch RoundBar Roof Rack on 2016 Toyota 4RunnerAll you'll need to do is order the # Y03536 RoundBar SL adapter kit which comes in a quantity of 4 and the # Y33TR TimberLine towers, also sold in a quantity of 4. Since you already have the 58 inch RoundBars, that's all you'll need. I've linked to the parts, just click each product link, add the parts to a cart and you'll be good to go!
view full answer... - Solution for Q-Clip for Yakima Q-Towers on 2021 Chevy Silverado 1500In 2016 Yakima transitioned away from the Q-Towers and started using their BaseLine system. According to Yakima there are no Q-Clips that will fit your truck so the only option is to switch to the new towers. For the 2021 Silverado 1500 Crew Cab you need the BaseLine Towers # Y28TR and BaseClip Fit Kit # Y06110. These will work with JetStream bars like # Y00426 or CoreBar crossbars like # Y00422. They will also work with RoundBar Crossbars # Y00409 using the adapter # Y03536 or HD Crossbars...
view full answer... - Yakima Roof Rack that Fits 2018 Kia SorentoThe RailGrab style of the Yakima roof rack was phased out couple years ago but Yakima does offer a round bar roof rack for your 2015 Kia Sedona with part numbers # Y00409, # Y00145, # Y03536, and # Y06006. If you have round bars already you could still reuse them. Or we have an aero bar fit too with part # Y00426, # Y00145, and # Y06006 which would give you a quieter ride quality.
view full answer... - Recommended Roof Rack that is Compatible with my 2013 Lexus GX 460The only roof rack that we currently offer for your 2013 Lexus GX 460 is the Yakima roof rack # Y00409. The Yakima RailGrab towers are # Y80145. This will only work with flush mounted rails that run front to back. I included FAQ link and installation videos for you as well.
view full answer... - 2015 Ford F-250 Super Duty Single Cross Bar Roof RackWe do have an option for a single bar roof rack for your 2015 Ford F-150. Best option is the Rhino Rack that consists of part numbers # RRVA150B, # RRRLKVAH, and # DK190H. Any other brand of rack is going to require you to buy more parts than you'd need. This is an aero shaped bar too which will minimize wind noise/resistance.
view full answer... - Roof Rack for 2022 Jeep Wrangler 4xe with Power Soft Top that Allows Top to OpenI checked with Yakima and came up with a roof rack that fits your 2022 Jeep Rubicon 4xE with the Sky One Touch power top and will allow the soft top to open. You'd need the Yakima 1A Raingutter Towers # Y00101 with two of the crossbars # Y8810023. And then the spacer kit part # Y01101 which is what gives the clearance for the power top to open.
view full answer... - Is the Yakima LockNLoad Platform Compatible with Yakima Round BarsYes. The Yakima Rain Gutter Towers # Y00101 can be used in a complete roof rack system using the Yakima Round Bars # Y00409 to mount the LockNLoad Platform Rack for Crossbars - Aluminum - 55" Long x 49" Wide # Y05044-39. You won't be able to mount the LockNLoad directly to the roof though. It looks like you might have a 2020 Jeep Gladiator, so if you wanted to mount directly to your roof the best solution is the Rhino-Rack Pioneer Platform Rack with Backbone Mounting System - 48" Long...
view full answer... - How to Carry Kayak at Front of 1992 Ford E-350 VanThanks for the photos, and although we do have a solution for you, the Curt Vertical Receiver Adapter # C45013 will only work with vertical OEM hitch receivers, which your 1992 Ford E-350 does not have. Additionally, any type of adapter is going to cut the capacity of your trailer hitch in half - including the tongue weight so adding any type of adapter with the type of cargo you are carrying is likely to push you past your capacity limits. The best option to carry your kayak is going...
view full answer...
- Yakima Roof Rack and Kayak Carrier Recommendation for a 2015 Jeep Wrangler Unlimited HardtopYes you can. I checked with Yakima and the Yakima Raingutter 1A Towers part # Y00101 are confirmed to fit the factory hardtop of your 2015 Jeep Wrangler Unlimited. The recommended crossbars would be the part # Y00409. Yakima says this rack setup has a weight capacity of 100 lbs. You will need to consult your owners manual to determine what Jeep says is your roof capacity and be sure to go with the lower of the two as the overall capacity. For a carrier that can carry up to 2 kayaks...
view full answer... - Will Yakima Roof Rack With Raingutter Towers Fit 2010 Jeep Wrangler Unlimited With a Hard TopThe Yakima roof rack system that you referenced will fit your 2010 Jeep Wrangler Unlimited with a hardtop by attaching to your drip rails/raingutters. To order a complete system you will need 1 set (qty 2) 58 inch round crossbar # Y00409 and 1 set (qty 4) raingutter towers # Y00101. Please be advised that since drip rails/raingutters are not structural the maximum allowable load is skis or snowboards only. You should install the towers on the rear roof panels only and do not install...
view full answer... - Roof Rack for 2021 Jeep Wrangler Unlimited With Sky One-Touch TopI checked with our roof rack manufacturers, and there is one option for a roof rack that fits your 2021 Jeep Wrangler Unlimited with the Skye One-Touch retractable roof. This rack will work and still allow you to open the top so long as you use the recommended spacers. The entire rack for that will work is the following: - Round CrossBars for Yakima Roof Rack - 58" # Y00409 or 66" # Y00410 - Yakima 1A Raingutter Towers # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 You...
view full answer... - How To Use the Surco Safari Rack 5.0 Rooftop Cargo Basket On a 2006 Dodge SprinterIn order to use the Surco Safari Rack 5.0 Rooftop Cargo Baskets on your 2006 Dodge Sprinter you will need the Surco Safari Rack 5.0 Rooftop Cargo Basket for Yakima Roof Racks part # SPS5084-Y400 which mounts using the Yakima Round CrossBar System part # Y00101 and part # Y00411. This is the longest available roof basket we have for your Sprinter. I checked with Surco and they do not list any of the Surco Safari Rack 5.0 Rooftop Cargo Baskets for Factory Rails like part # SPS5084-1101...
view full answer...
- Which Roof Racks Will Fit a 2004 Ford E-150 VanWe do have roof rack options for a 2004 Ford Van. I have included a link to the available options for you to view. The most popular and most economic option is the Yakima system. For it you will need the following parts: Crossbars, # Y00410 Yakima Raingutter Towers, # Y00101 I have included a link to the installation details for the Raingutter Towers for you. If this is a work van and you need a ladder rack option, we have those as well. I have included another link to them for you.
view full answer... - Roof Rack and Largest Cargo Basket Recommendation for a 1995 Land Rover Range Rover ClassicFirst you will want to start with a roof rack on your 1995 Land Rover Range Rover Classic. For that you will want the Yakima roof rack that consists of the Round 66" CrossBars # Y00410 and the Yakima 1A Raingutter Towers # Y00101. The absolute biggest roof rack cargo basket that would fit this roof rack would be the Surco Safari Rack 5.0 Rooftop Cargo Basket # SPS5084-Y400.
view full answer... - Recommended Roof Rack for 2013 Wrangler 2 Door with Hard TopThe easiest solution would be to assemble a roof rack using the following parts from Yakima: 58 Inch Long Round Crossbars, part # Y00409 Yakima 1A Raingutter Towers, part # Y00101 Once the crossbars are in place, the Thule Flat Top Ski and Snowboard Carrier you already have will attach directly to the crossbars. When used on a Wrangler Hard Top, the drip rails that the roof rack towers attach to have a limited carrying capacity. Yakima recommends carrying skis or snowboards only, nothing...
view full answer... - Roof Rack Solution for Truck Topper Using Artificial Rain GuttersThe components in the photo you referenced are from Yakima. Yakima's artificial rain gutters are the Side Loader Brackets # Y08002. The roof rack towers for the rain gutter system are the Yakima 1A Raingutter Towers # Y00101, which come in a quantity of 4. These towers are designed for use with the Yakima RoundBar crossbars. Yakima crossbars come in a variety of lengths. Depending on how much overhang of the crossbar you want, the Round 58 Inch Crossbars for Yakima Roof Rack Systems...
view full answer...
- What Roof Rack do You Recommend for My 2022 Jeep Wrangler Unlimited with a Sky One-Touch Roof?For your 2022 Jeep Wrangler Unlimited with a Sky One-Touch Power Top, we only have one option that is confirmed to fit your setup. For a great system, I recommend the following components: - Yakima 1A Raingutter Towers (QTY 4) # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 - Yakima Round 58" CrossBars for Yakima Roof Rack System # Y00409 - Same-Key Lock Cores # Y07204 With this system, you will still be able to open/close your roof. You also get the security of the...
view full answer... - Why Aren't Rubber Boots Included for the Outside Raingutters with Yakima Raingutter TowersI assume you are talking about the hook part of the gutter feet. A rubber boot would cause fit issues with the Yakima Raingutter towers # Y00101. Rubber or plastic can flex and move which could lead to the clamp part of the tower to come off. The hooks are coated so as to avoid metal on metal contact. If you want you could place protective clear film, # 853-5481, in the desired locations. This is a set of 4 film sections so that works out well since there are 4 towers. But you may need...
view full answer... - Will the Rhino-Rack SG Roof Rack for Rain Gutters Fit My 1998 Volvo S90?I have a solution for you. The Rhino-Rack SG Roof Rack for Rain Gutters - Vortex Aero Crossbars - Aluminum - Black # RRSG59 will only fit certain models and years of Jeeps. Unfortunately, it will not fit your 1998 Volvo S90. With that being said, there is a roof rack system that is compatible. For this route, I recommend the following parts: - Round 58" CrossBars for Yakima Roof Rack System (QTY 2) # Y00409 - Yakima 1A Raingutter Towers (QTY 4) # Y00101 With this roof rack system, you...
view full answer... - Roof Rack for a 2013 Jeep Wrangler Unlimited SaharaI recommend the Yakima 1A Gutter Rack, a kit consisting of: Yakima 58 inch Round Bars, part # Y00409 Yakima 1 A Raingutter Towers, part # Y00101 This will give you an excellent rack for your vehicle with the hard top equipped and be very easy to install. Because of the easily accessible knobs, I recommend picking up Yakima's SKS cores, part # Y07204 to add an extra layer of security to the rack.
view full answer... - Best Way to Transport 2 Paddleboards on 2014 Jeep Wrangler Sport HardtopYour Jeep Wrangler with its hard top gives you two options for paddleboard transport. One is VERY low in cost and simple to use. Roof racks are available for your hardtop and these would allow use of a paddleboard carrier but not the discontinued Thule SUP Taxi Paddleboard Carrier that you referenced (this carrier requires a minimum crossbar spread of 24-inches and the racks only provide 18-inches of spread). The link provided shows these roof racks, which include the most cost-effective...
view full answer... - Will SportRack Frontier Semi-Custom Roof Rack # A21002S Fit 1998 Mitsubishi Montero with Naked RoofThe SportRack Frontier Semi-Custom Roof Rack # A21002S does not appear on our site among the roof rack options for your 1998 Mitsubishi Montero with Naked Roof because this rack system is not a fit for it. The 50-inch crossbars are too short for the Montero; the shortest bars that will work on your vehicle are 54-inches. The link provided will take you to our main page for all roof rack systems that are compatible with your 1998 Montero with naked roof. A cost-effective option is the...
view full answer... - Roof Rack For A 2021 Jeep Wrangler UnlimitedYes, we have the Yakima Roof Rack # Y00410, with the Yakima 1A Raingutter Towers # Y00101 for your 2021 Jeep Wrangler Unlimited. These are 66" round crossbars that can carry either: -6 Bikes, or, -Yakima FatCat 4, 1 kayak and 2 bikes, or, -1 Bike, 1 kayak and Yakima SkyBox Pro 12, or, -Yakima SkyBox Pro and 1 canoe, or, -1 canoe and 2 bikes, or, -Yakima SkyBox Pro and 1 kayak on HullRaiser, or, & -Yakima LoadWarrior and 1 kayak on HullRaiser.
view full answer... - Recommended Trailer Hitch and Roof Rack for 1999 Ford E150 SuperwagonThe Draw-Tite Ultra Frame Trailer Hitch Receiver # 41906 is a fit for your 1999 Ford E-150 Superwagon. It is a fit for 1995-2003 Superwagon models and will install easily with the included hardware. For the roof rack compatible with a Thule Cargo Basket or Cargo Box, I recommend the Inno Square Crossbars - Steel - Black - 65" Long - Qty 2 # INB165 and Inno Feet for Square Crossbars - Rain Gutters - 7-1/2" Tall - Qty 4 # INSD. To add a ladder, I recommend the Surco Universal Exterior...
view full answer...
- What Roof Basket Should I Buy for for a 2021 Chevy Express Cargo Van?If you want a basket system that will fit your 2021 Chevrolet Express Van that isn't the Rhino-Rack Pioneer Platform Rack - Gutter Mount - 100" Long x 62" Wide # RR93QX, you will need crossbar setup for your roof. For a crossbar system, I recommend the following parts: - Round 66" CrossBars for Yakima Roof Rack System (QTY 2) # Y00410 - Yakima 1A Raingutter Towers (QTY 4) # Y00101 Once you have a roof rack system, you will be able to attach a basket. For the basket itself, I recommend...
view full answer... - Recommended Roof Rack for 2006 Dodge SprinterYes, we do offer roof rack options for a 2006 Dodge Sprinter which mount to the rain gutter channels. I recommend the Yakima Rain Gutter Round Bar System which consists of part # Y00101 and part # Y00410. These crossbars will allow you to use all sorts of rooftop mounted accessories. They are made of galvanized steel so they are both strong and long lasting. I have linked our watersport carrier selection below for you as well.
view full answer... - Rain Gutter Roof Rack Availability for a 1959 Rover P4The Yakima Tower Kit we have for Rain Gutters is part # Y00101. This has never been tested on your 1959 Rover P4 but it is designed to fit rain gutters like what you have. You would need two crossbars part # Y8810023 as well. The height of the gutter feet is 7-1/4 inches. I looked at pictures of the roof of your vehicle and it has a pretty rounded roof. If you needed a taller setup you would also need the spacer to increase the height part # Y01101 which will ad 3-1/2 inches.
view full answer... - Recommended Spare Tire Bike Rack to Fit a 2008 Jeep Wrangler RubiconYour best bet would be the Thule Spare Me 2 Bike Rack, part # TH963PRO. This rack will fit tires with a maximum diameter of 32 inches, and up to 10 inches wide. The maximum distance from the rear of the wheel (the portion that would rest against the hub when installed) to the farthest wall of the tire can be no more than 4 inches. If your spare meets those criteria, the Thule rack should work for you. Another option would be to utilize your hitch for a hitch mounted bike rack. As far...
view full answer... - Yakima Raingutter Tower Roof Rack Parts for Truck CanopyI am happy to report that the hole spacing on Yakima Side Loader Mounting Bracket kit # Y08002 is indeed 4-1/8-inches center to center. Please refer to the linked photo. To complete a rack with these mounts you can use the 1A Raingutter Towers # Y00101, Lock Core kit # Y07204 and a set of Yakima round crossbars from the linked page. We have many lengths available, such as 58-inch bar set # Y00409. Other sizes are available too.
view full answer...
- Roof Rack for 2022 Jeep Wrangler 4xe with Power Soft Top that Allows Top to OpenI checked with Yakima and came up with a roof rack that fits your 2022 Jeep Rubicon 4xE with the Sky One Touch power top and will allow the soft top to open. You'd need the Yakima 1A Raingutter Towers # Y00101 with two of the crossbars # Y8810023. And then the spacer kit part # Y01101 which is what gives the clearance for the power top to open.
view full answer... - How to Carry Kayak at Front of 1992 Ford E-350 VanThanks for the photos, and although we do have a solution for you, the Curt Vertical Receiver Adapter # C45013 will only work with vertical OEM hitch receivers, which your 1992 Ford E-350 does not have. Additionally, any type of adapter is going to cut the capacity of your trailer hitch in half - including the tongue weight so adding any type of adapter with the type of cargo you are carrying is likely to push you past your capacity limits. The best option to carry your kayak is going...
view full answer... - Roof Rack for 2021 Jeep Wrangler Unlimited With Sky One-Touch TopI checked with our roof rack manufacturers, and there is one option for a roof rack that fits your 2021 Jeep Wrangler Unlimited with the Skye One-Touch retractable roof. This rack will work and still allow you to open the top so long as you use the recommended spacers. The entire rack for that will work is the following: - Round CrossBars for Yakima Roof Rack - 58" # Y00409 or 66" # Y00410 - Yakima 1A Raingutter Towers # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 You...
view full answer... - What Roof Rack do You Recommend for My 2022 Jeep Wrangler Unlimited with a Sky One-Touch Roof?For your 2022 Jeep Wrangler Unlimited with a Sky One-Touch Power Top, we only have one option that is confirmed to fit your setup. For a great system, I recommend the following components: - Yakima 1A Raingutter Towers (QTY 4) # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 - Yakima Round 58" CrossBars for Yakima Roof Rack System # Y00409 - Same-Key Lock Cores # Y07204 With this system, you will still be able to open/close your roof. You also get the security of the...
view full answer... - Rain Gutter Roof Rack Availability for a 1959 Rover P4The Yakima Tower Kit we have for Rain Gutters is part # Y00101. This has never been tested on your 1959 Rover P4 but it is designed to fit rain gutters like what you have. You would need two crossbars part # Y8810023 as well. The height of the gutter feet is 7-1/4 inches. I looked at pictures of the roof of your vehicle and it has a pretty rounded roof. If you needed a taller setup you would also need the spacer to increase the height part # Y01101 which will ad 3-1/2 inches.
view full answer... - Carrying Kayaks And Operating The Sunroof On A 2021 Jeep Wrangler UnlimitedThe Yakima 1A Raingutter Towers (QTY 4), part Y00101, is not tall enough to work with the one touch sunroof on your 2021 Jeep Wrangler Unlimited. In order to operate the sunroof you need the tallest, 11", rain gutter towers. If you add the HiRise Spacers for Yakima 1A Raingutter Towers, part # Y01101, your towers will have the necessary height. You can add the Round 58" CrossBars for Yakima Roof Rack System (QTY 2), part #Y00409. This rack will have round bars, so any of our kayak carriers...
view full answer... - Roof Rack for 2021 Jeep Wrangler Unlimited with Sky One-Touch Roof for Platform TrayThere really is only one roof rack option for the roof of your 2021 Jeep Wrangler Unlimited and it's the following round bar setup: - Round CrossBars for Yakima Roof Rack - 58" # Y00409 or 66" # Y00410 - Yakima 1A Raingutter Towers # Y00101 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 Yakima does not have a version of the Jetstream that attaches to the raingutter towers. This rack would work with the Yakima LockNLoad Platform Rack for Crossbars # Y05048-39 you were wanting...
view full answer... - Roof Rack That Is Compatible With My 2021 Jeep Wrangler Unlimited W/ Sky Roof And Rooftop TentI do have a solution for your 2021 Jeep Wrangler Unlimited with the Sky Roof. You can get a Yakima roof rack with the HiRise spacers. It will consist of the following items: Round 58" CrossBars for Yakima Roof Rack System (QTY 2), part # Y00409 Yakima 1A Raingutter Towers (QTY 4), part # Y00101 HiRise Spacers for Yakima 1A Raingutter Towers, part # Y01101 Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204 It has a dynamic weight limit of 165 lbs. That is the weight limit of...
view full answer... - Roof Rack for a 2022 Jeep Wrangler Unlimited with OneTouch SkytopI do have an option for you. I checked with our manufacturers and was able to find one roof rack that will work for your 2022 Jeep Wrangler Unlimited with OneTouch Skytop. This rack will fit and still allow you to open the top as long as you use the recommended spacers. All of the parts needed for this rack are listed below. - Yakima 1A Raingutter Towers # Y00101 - Round CrossBars for Yakima Roof Rack - 58" # Y00409 - HiRise Spacers for Yakima 1A Raingutter Towers # Y01101 You can lock...
view full answer... - Replacement Parts for Yakima 1A Raingutter Roof Rack TowersIt sounds like you are talking about the shear block bases # Y8810007 for the Raingutter towers such as # Y8810137. This is a set of 4. Other replacement parts for the Yakima Raingutter 1A towers include: Boot set # Y8810008 Another shear block set # Y8810006 Hardware kit # Y8810136
view full answer... - What Roof Rack Fits My 2019 Jeep Wrangler Unlimited with Sky One Touch Roof?I have a great solution for you. Unfortunately, I confirmed with Rhino-Rack that the Rhino-Rack Roof Rack Legs - Gutter Mount - 8-1/4inch Tall # RL210S2 and the Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 are not confirmed to fit your 2019 Jeep Wrangler 4-door Unlimited with a Sky One Touch roof. However, we currently do have a confirmed setup that will work from Yakima. For that system, I recommend the following parts for your vehicle: - Round CrossBars for Yakima Roof Rack - 58"...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.